Car Jacks

Fully adjustable Subframe/Engine Support Adaptor is supplied with various types of fittings to suit different applications. Designed to assist in the removal and fitting of complete engine assemblies, rear axles, gearboxes, fuel tanks, exhaust systems and other awkward loads. The adaptor can easily be fitted directly onto the Sealey 500TTJ and 800TTJ Transmission Jacks, making it possible for a difficult two or three person job, to be carried out by just one person. Features & Benefits: • Fully adjustable Subframe/Engine Support Adaptor. • Supplied with various types of fittings to suit different applications. • To assist in the removal and fitting of complete engine assemblies, rear axles,…

Powder coated pressed steel frame, to ensure strength and durability. Ideal for use with off-road/trials bikes to easily lift the bike when needing to perform maintenance, servicing or cleaning. Simple, one foot, step-and-lift mechanism means the bike can be instantly raised in one motion. For added safety, features an ‘over centre’ locking toggle linkage to mechanically lock the lift at full height to prevent accidental lowering. Also fitted with hydraulic dampener for controlled descent. Features & Benefits: • Min./Max. Height: 300/410mm. • Maximum Capacity: 150kg. • Powder coated pressed steel frame, to ensure strength and durability. • Ideal for use with off-road/trials bikes to easily li…

Approved to EU and UK Lifting Gear Regulations. This hoist is intended for use where a suitable support facility exists. Support brackets are included with the equipment. The support bar is not included. Features & Benefits: • Approved to EU and UK Lifting Gear Regulations. • This hoist is intended for use where a suitable support facility exists. • Support brackets are included with the equipment. • Maximum Capacity (Double Cable): 250kg. • N.B. Support bar is not included. • Model No. PH250 Specifications: Model No PH250 Brand: Sealey Capacity (Double Cable): 250kg Capacity (Single Cable): 125kg Current: 2.2A Group of Mechanisms: M1 Insulating Grade: B IP Rating: IP54 Lift Height (Double Cabl…

Twin piston Rocket Lift feature brings saddle to maximum height in minimal strokes. Universal joint release mechanism allows safer, more controlled lowering of jack. Polyurethane wheels for smoother manoeuvrability and helps prevent damage to workshop floor. Profiled lifting arm gives low clearance height of just 85mm making it suitable for sports and custom cars. Heavy-duty steel chassis provides stability and endurance. Fitted with an overload valve for added safety. Hydraulic oil by-pass system protects ram from being overextended.

Rubber wheel chocks weighing 8kg (4kg each) prevent vehicle movement when jacking or parking on an incline. Suitable for heavy commercial vehicles and light aircraft. Chocks supplied on rope for easy storage and removal from underneath wheels. Not intended for use on sloped ground over 12º. Features & Benefits: • Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12º. • Suitable for light aircraft, or vehicles below 30 Tonne. • Chocks supplied on rope for easy storage and removal from underneath wheels. • Dimensions (W x D x H): 455 x 155 x 140mm. • Model No. WC11

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…

Off-road base compatible with most high-lift farm jacks. Designed to spread ground force of jack to prevent sinkage on soft surface. Includes handle coupler to lock most high lift farm jacks handle in position for secure transportation. Base size 184 x 185mm. Features & Benefits: • Off-road base compatible with most high-lift farm jacks. • Designed to spread ground force of jack to prevent sinkage on soft surface. • Includes handle coupler to lock most high lift farm jacks handle in position for secure transportation. • Base size 184 x 185mm. • Model No. FJKIT Specifications: Model No FJKIT Brand: Sealey Nett Weight: 1.35kg

The Sealey VS0110 Under Vehicle Engine/gearbox Support is ideal when replacing clutches or timing belts The Sealey VS0110 is an under vehicle engine/gearbox support that is fully adjustable, making the unit suitable for most transverse and in-line configurations. Designed to support the engine or gearbox when mountings or gearbox are being removed. This unit removes the need for using a transmission jack or engine support beam. Features:
- Ideal when replacing clutches or timing belts
- Removes the need for using a transmission jack or engine support beam
- Fully adjustable, making the unit suitable for most transverse and in-line configurations
- Designed to support the engine or gearbox …