Car Jacks

Steel tube chassis with four Ø100mm nylon castors. Pedal operated hydraulic lifting action with safety locking pin when under load. Aluminium rollers cradle vehicle’s tyre and are capable of handling up to 240mm profiles. Suitable for bodyshops, garages, showrooms or anywhere an immobile vehicle needs moving on an even surface. Note: Skates sold as singles, but must be used in pairs. Features & Benefits: • Steel tube chassis with four Ø100mm nylon castors. • Pedal operated hydraulic lifting action with safety locking pin when under load. • Aluminium rollers cradle vehicle’s tyre and are capable of handling up to 240mm profiles. • Suitable for bodyshops, garages, showrooms or anywhere an im…

Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point. Features & Benefits: • Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. • Low profile afforded by integral pivot/lifting point. • Model No. BC3000 Specifications: Model No BC3000 Adjustable Beam Width: 80-320mm Brand: Sealey Capacity: 3000kg Dimensions: (A) - 35…

Compact design but handles the larger bonnets, tailgates etc. Ideal for doors, bonnets, bumpers, wings and spoilers. Fully adjustable, rotates full 180. Adjustable and rotating bars make this stand suitable for almost all panel types. Portable for easy manoeuvring of application from preparation to spray booth.

Weight-for-weight, this strap is three to five times stronger than chain and has the advantage that overload can be detected early by the fraying of the strap. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capacity: 1000kg • …

Bottle jack, with hydraulic unit, max. load 5 t. Supplied = assembled. Max. load = 5 t. Lifting range with lifting head = 195 - 380 mm. Lift = 125 mm. Weight = 3.3 kg. Piston diameter = 27 mm. Base plate length = 105 mm. Base plate width = 100 mm. Additional height when unwound = 60 mm. Overall height from - to = 195 - 380 mm mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can …

This engine support beam is designed to position the engine when replacing the engine mounts. It is also suitable for aiding the removal of transmission components and gearboxes. Compatible with most cars and light commercial vehicles. Adjustable outer extension clamps with rubber feet to prevent damage to the paintwork. Supplied with one chain. Contents: 1 x Chain Specifications: Capacity: 300kg Min. width: 1,015mm Max. width: 1,380mm Adjustable screw height: 0-305mm Overall beam length: 990mm Chain quantity: 1 Weight: 15kg

Replacement hydraulic ram for SPC1000 engine crane. Features & Benefits: • Replacement hydraulic ram for SPC1000 engine crane. • Model No. SPC1000.28 Specifications: Model No SPC1000.28 Brand: Sealey Nett Weight: 13kg Ram Capacity: 5000kg Ram Diameter: 31.92mm Ram Travel: 585mm Pump Type: Twin Speed Ram Pin Hole Diameter: 18.0mm Clevis Pin Hole Diameter: 27.5mm* Mounting Point Distance (Min.): 706mm** Overall Length (Min): 763mm Base Mount Type: Spigot Mounted * Internal diameter of spigot mount ** From base plane to ram pin centre

Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one end (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 2m x 120mm, 4 Tonne

Triple castor wheel design allows a stabile multi-directional movement of motorcycle once lifted. Features width adjustment from 185 to 265mm, making it suitable for most types of motorcycle. Design ensures rim and tyre protection at all times. Once the bike is supported, allows easy removal and cleaning of front wheel. Please note: All front paddock stands need to be used in conjunction with a suitable rear stand to ensure bike stability (See Model No's RPS2 or, for full floating movement, use RPS2MD). Features & Benefits: • Triple castor wheel design allows a stabile multi-directional movement of motorcycle once lifted. • Features width adjustment from 185 to 265mm, making it suitable for …