only car jacksin all categories
only car jacks
United Kingdom

Car Jacks

 prices on 676 models  
£200
clear
Save List
Show
• Replacement hydraulic ram for PH30 engine crane.Replacement hydraulic ram for PH30 engine crane.• Replacement hydraulic ram for PH30 engine crane. • Model No. PH30.01Technical Specification:Nett Weight: 14.7kgRam Capacity: 1200kgRam Diameter: 38.05mmRam Travel: 494mmPump Type: Single SpeedRam Pin Hole Diameter: 22.2mmClevis Pin Hole Diameter: 21.4mmMounting Point Distance (Min): 650mmOverall Length (Min): 690mmBase mount Type: Double ClevisDimensions: Length: 180mm x Height: 140mmWeight: 15.8KgWarranty: Consumable
from £134.95 up to £169.37 
Compare prices and buy Sealey Hydraulic Ram for PH30
Tooled-up.com  →
£135.00
Zoro.co.uk (United Kingdom) →
£150.00
Electricalworld.com (United Kingdom) →
£169.00
Compare prices3→
0.22 kg
£14.15
Idealo.co.uk
Delivery: in United Kingdom
Report
Buy!
Idealo.co.uk
Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.
from £14.95 up to £17.92 
Compare prices and buy Draper Wide Load Sling, 2m x 90mm, 3 Tonne
Mytoolshed.co.uk (United Kingdom) →
£15.00
Tooled-up.com  →
£15.00
Electricalworld.com (United Kingdom) →
£18.00
Compare prices3→
The Sealey 10 Tonne Telescopic Low Entry Bottle Jack benefits from a base and reservoir machine welded for increased strength and reduced chance of leakage.
£149.00
MachineMart.co.uk
Delivery: to United Kingdom
Report
Buy!
MachineMart.co.uk
VEVOR Floor Jack, 3 Ton Low Profile Floor Jack, Heavy-duty Steel Racing Floor Jack With Single Piston Quick Lift Pump, Floor Jack Lifting Range 130 mm-508 mmPowerful CapacityBuilt to LastEasy to OperateNo More Damage to VehiclesReliable SealingSmooth-RollingTwo-section HandleHandle Length: 45 in/1145 mm,Product Size (L x W x H): 25.8x12.8x6.7 (inch)/656x325x170 (mm),Lift Weight Capacity: 6600 LBS/3 Tons,Model: S508,Product Weight: 32.3 kg/71.2 lb,Load Bearing Method: Hydraulic Single Pump,Maximum Height: 20"/508 mm,Material: Steel,Tray Diameter: Φ 4.3 in/110 mm,Minimum Height: 5.12"/130 mm
£134.99
Vevor.co.uk
Delivery: to United Kingdom
Report
Buy!
Vevor.co.uk
You may be interested in
Headphones Stereo 3.5mm Jack- Lightweight Adjustable Headband
£6.59
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 12mm. Size ø136.5mm. Fits saddle ø136.5mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 12mm. • Size: ø136.5mm. • Fits saddle ø136.5mm. • Model No. JP08Technical Specification:Nett Weight: 0.23kgJack Pad Size: ø136.5mmStyle: Type BProfile Depth: 12mmTo Fit Saddle Size: ø136.5mmWeight: 0.23kgDimensions: Length: 20mm x Height: 280mmWeight: 0.246KgWarranty: Consumable
from £7.52 up to £8.99 
Compare prices and buy Sealey Safety Rubber Jack Pad - Type B V2
Electricalworld.com (United Kingdom) →
£8.00
Zoro.co.uk (United Kingdom) →
£9.00
Tooled-up.com  →
£9.00
Compare prices3→
• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…
from £111.95 up to £140.15 
Compare prices and buy Sealey Beam Clamp 3 Tonne
Mytoolshed.co.uk (United Kingdom) →
£112.00
Tooled-up.com  →
£112.00
Toolbee.co.uk (United Kingdom) →
£118.00
Electricalworld.com (United Kingdom) →
£140.00
Compare prices4→
Car Scissor Jack / Lift Jack With Ratchet For easy use Quick Car Lift Jack| Car Jack available Sizes: 1 ton, 1.5 ton & 2 tons. Suitable for car lift in home or garage Floor Car jack Suitable for Car, Van, SUV Car scissor jack with ratchet is a lightweight and compact tool suitable for emergency and breakdown- easy to store in a car's trunk or under a seat Portable Lift Jack is designed for safely lift a car for maintenance or tire changes Necessary tool for car lifting and tyre change Speed ratchet - to enable you to make the lifting process easy and quick Quality Car Lift Scissor Jack for all type of cars Brand: alca Germany
£34.99
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
To suit the Kennedy Heavy Duty 1/2 Ton Transmission Jack (KEN-503-7160K) illustrated. N.B. Jack not included.
£19.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
GREY support trestles, 1 pair, max. load 14 t, 4+ pairs. Supplied = assembled. Max. load = 14 t. Lifting range with lifting head = 242 - 400 mm. Lift = 158 mm. Weight = 13 kg. Weight per item = 6.5 kg. Product type = uprights. For supporting vehicles or heavy machinery. Robust design with wide and stable contact surface. Safe and easy handling. Perfectly suited for supporting and securing heavy loads. High quality workmanship with a long service life.
£164.40
KaiserKraft.co.uk
Delivery: to United Kingdom
Report
Buy!
KaiserKraft.co.uk
• Replacement hydraulic ram for SC10LR.V2 engine crane.Replacement hydraulic ram for SC10LR.V2 engine crane.• Replacement hydraulic ram for SC10LR.V2 engine crane. • Model No. SC10LR.V2-23Technical Specification:Nett Weight: 13kgRam Capacity: 7257kgRam Diameter: 33.93mmRam Travel: 495mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.7mmMounting Point Distance (Min): 620mmOverall Length (Min): 655mmBase Mount Type: Double ClevisWeight: 13.003KgWarranty: Consumable
from £123.95 up to £153.69 
Compare prices and buy Sealey Hydraulic Ram for SC10LR.V2
Tooled-up.com  →
£124.00
Zoro.co.uk (United Kingdom) →
£130.00
Electricalworld.com (United Kingdom) →
£154.00
Compare prices3→
All articles about car jacks
What are homologated tyres?
Price decides? Is it worth buying Chinese tyres?
Crash course on the choice of winter tyres
The best mid-priced R17 summer tires for SUVs
Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.
from £157.95 up to £202.23 
Compare prices and buy Draper Chain Hoist/Chain Block, 3 Tonne
Mytoolshed.co.uk (United Kingdom) →
£158.00
Tooled-up.com  →
£158.00
Toolbee.co.uk (United Kingdom) →
£199.00
Electricalworld.com (United Kingdom) →
£202.00
Compare prices4→
Protective Rubber Pad for Trolley Jack 1pcs Universal Car Rubber Pad Size:65 x 33 Made of high quality rubber, will not damage the vehicle. Suitable for most floor jacks and lifts This is a high-quality HEYNER German product
£14.99
Amazon.co.uk
Delivery: to United Kingdom
Report
Buy!
Amazon.co.uk
Seal Repair Kit for ZT1120453X by Kennedy
£5.59
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Portable Trolley Jack Kit for light domestic use. Ideal for roadside recovery. Package includes: 1020LEO - Trolley Jack 2tonne Low Entry Short Chassis - Orange AP600JB - Trolley Jack Bag 600mm AS2000F - Axle Stands (Pair) 2tonne Capacity per Stand - Folding Type WCF01 - Folding Wheel Chocks - Pair S0472 - 3pc 1/2"Sq Drive Extendable L-Bar Wrench Set You may also refer to the individual Model No. for full specification.
£179.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Type B design. Fits inside the jack saddle.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 18mm. • Size: ø117mm. • Fits saddle ø112-117mm. • Model No. JP18Technical Specification:Nett Weight: 0.235kgJack Pad Size: ø117mmStyle: Type BProfile Depth: 18mmTo Fit Saddle Size: ø112-117mmWeight: 0.235kgDimensions: Length: 25mm x Height: 240mmWeight: 0.256KgWarranty: Consumable
from £7.52 up to £8.95 
Compare prices and buy Sealey Safety Rubber Jack Pad - Type B V1
Electricalworld.com (United Kingdom) →
£8.00
Tooled-up.com  →
£9.00
Compare prices2→
• Suitable for use with our lever hoists or chain blocks.• Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways.• Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.• Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load…
from £120.95 up to £145.79 
Compare prices and buy Sealey Trolley Plain 1 Tonne
Mytoolshed.co.uk (United Kingdom) →
£121.00
Tooled-up.com  →
£121.00
Electricalworld.com (United Kingdom) →
£146.00
Compare prices3→
The JCB-TH33007 is a robust and durable double-pump hydraulic trolley jack designed to offer a maximum lifting capacity of up to 3 tonnes in weight.Constructed with a high quality and heavy-duty steel frame, the JCB-TH33007 is capable of lifting SUVs, cars, light commercial vehicles and any other vehicle which requires high ground clearance up to 465mm in height.Thanks to its double-piston design, the JCB-TH33007 is a quick-lift trolley jack, which will save you precious time and effort in comparison to a single-piston counterpart.The JCB-TH33007 is also equipped with swivel rear wheels and a saddle to provide smooth manoeuvring and positioning of the jack, while its integrated protection rubber …
£129.99
Jcb-tools.co.uk
Delivery: in United Kingdom
Report
Buy!
Jcb-tools.co.uk
Black puncture proof tyre on a pressed steel welded rim with ball bearings. Diameter 300mm, tread width 90mm, bore size 20mm, hub length 65mm. Load capacity 150kg.for non towing applications.
£59.99
Zoro.co.uk
Delivery: in United Kingdom
Report
Buy!
Zoro.co.uk
Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle.2 Tonne Bottle Jack• Min./Max. Height: 168/316mm.• Fitted with overload valve.• Base and reservoir machine welded. • Supplied with 2-piece handle.• 3 Year guarantee*.• Model No. PBJ2SModel No: PBJ2S:Brand: Viking:Capacity: 2 Tonne:Hydraulic Lift: 100mm:Maximum Height: 316mm:Minimum Height: 168mm:Nett Weight: 2.2kg:Screw Extension: 48mm:PTDSEAPBJ2S
£38.00
PowerToolsDirect.com
Delivery: in United Kingdom
Report
Buy!
PowerToolsDirect.com
• SPACE SAVING - Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall.• 2 AND 3 TONNE - Suitable for Sealey axle stands like the VS2002, VS2003 and AS3 ranges as well as most other brands of axle stands.• HEAVY DUTY FIXINGS - Supplied with fasteners to mount to a wall.• SECURE - Axle stands are held firm horizontally by hooking onto cross brace, without the risk of falling.Technical SpecificationNett Weight: 2kg
from £25.95 up to £26.98 
Compare prices and buy Sealey Axle Stand Storage Rack 2 & 3 Tonne
Tooled-up.com  →
£26.00
Electricalworld.com (United Kingdom) →
£27.00
Compare prices2→
• Optional Bobbin Support for Model No. RPS2.• Designed to give extra support and added stability once rear axle has been located and raised.• Yellow phosphate finish for added corrosion resistance.Optional Bobbin Support for Model No. RPS2. Designed to give extra support and added stability once rear axle has been located and raised. Yellow phosphate finish for added corrosion resistance.• Optional Bobbin Support for Model No. RPS2. • Designed to give extra support and added stability once rear axle has been located and raised. • Yellow phosphate finish for added corrosion resistance. • Model No. RPS1BSTechnical Specification:Length: 105mmNett Weight: 0.34kgQuantity: 2Dimensions: Length: 115mm …
from £11.95 up to £13.95 
Compare prices and buy Sealey Bobbin Supports for RPS2
Tooled-up.com  →
£12.00
Electricalworld.com (United Kingdom) →
£14.00
Toolbee.co.uk (United Kingdom) →
£14.00
Compare prices3→
Trolley Jack / Max Load 3 t / Hubhöhe 505 mm / Unterfahrhöhe 75 mm / 34.2 kg / Cushions
£143.99
Idealo.co.uk
Delivery: in United Kingdom
Report
Buy!
Idealo.co.uk
4 more item(s)
1 ... 26 27 28 29
Filters
Price
from£ up to£ 
Brands
Type
Lifting mechanism
Maximum load
More features
Min. height
Lifting height
Got ideas or questions about filters? Click here!
Models