Car Jacks

2.5 Tonne trolley jack suitable for 4 x 4s, light vans and cars. Includes adjustable saddle extension for when extra lifting height is required. Versatile lifting range of 150mm to 440mm without exten more→sion and 530mm with extension added, with a quick lift side lever for raising to lifting point with only one pump needed. All steel construction frame and wheels with heavy duty cast iron pump. Built in pump overload prevents over loading for safe operation with hydraulic bypass system to stop ram over travel. Product size: 680 x 290 x 190mm, weight 21.5kg, packaged in colour box.

Powerful engine with variable speed control 1000-3000 rpm Soft start electronics for gentle start-up Spindle lock

Air/Hydraulic bottle jack capable of both air assisted or manual operation. Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design more→gives added strength. Fully serviceable ram piston with extension screw. Supplied with 90° rotating pump and telescopic pump handle and has moulded carry handles incorporating storage for the pump handle. Service kit readily available.

VEVOR Hydraulic Long Ram Jack, 8 Tons/17363 lbs Capacity, with Single Piston Pump and Clevis Base, Manual Cherry Picker with Handle, for Garage/Shop Cranes, Engine Lift Hoist, Red8-Ton/17636 lbs Load more→Capacity26 "-45.7" Lifting RangeHydraulic Steel CylinderSingle Piston Pump & Clevis BaseHigh-grade Steel StructureResidential and Commercial UseStoke: 19.7 in/50 cm,Pinhole Diameter: 0.7 in/1.7 cm,Product Diameter: 3.1 in/8 cm,Piston Rod Diameter: 1.2 in/3 cm,Lifting Capacity: 8 Tons/17363 lbs,Model: VV-CGQJD-HODJ-8T,Min. Lift Height: 26 in/66 cm,Max. Lift Height: 45.7 in/116 cm,Power: Hydraulic,Weight: 20.5 lb/9.3 kg

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base tha more→t provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

Twin piston rocket lift brings the lifting arm straight into contact with the jacking point in a minimal amount of strokes. Universal joint release mechanism allows safer and more controlled lowering more→of the jack. Profiled lifting arm gives low entry height of just 70mm making this unit suitable for sports and custom cars. Heavy-duty chassis with strengthening flanges along the side for extra torsional rigidity under load. One-piece hydraulic unit heavy-duty pump-through action preventing handle locking at maximum ram extension. Overload safety valve prevents maximum weight capacity being exceeded and white saddle with rubber jack pad aids secure positioning under vehicle. Foam Jack

Ideal for workshop or roadside use, this jack takes the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead mans handle which also aids controlled lowe more→ring speed. Supplied with extensions that close the gap between the saddle of the jack and the jacking point. See table for detailed specification.

The JCB-TH32506S is a robust, low-profile and double-pump hydraulic off-road SUV trolley jack designed to offer a maximum lifting capacity of up to 2.5 tonnes in weight.Courtesy of its aluminium const more→ruction, the JCB-TH32506S is capable of lifting SUVs, cars, light commercial vehicles and any other vehicle which requires high ground clearance up to 525mm in height in all conditions.In addition to its default 525mm maximum height clearance, the JCB-TH32506S comes equipped with 2x saddle extensions, which can increase the trolley jack’s maximum ground clearance up to 677mm.The JCB-TH32506S’ chassis utilises a low-profile design, which allows the trolley jack to reach lower clearances, particularly usef…

VEVOR Pneumatic Jacks,6600 lbs(3.0Ton) Pneumatic Car Jack with Portable Handle,triple bag jack Thickened Rubber for soft and easy to collapse terrain, water on sand or muddy roads6600lbs Loading Capa more→city5.3"-15.75" Lifting RangeSolid ConstructionEasy OperationEasy to StoreWide ApplicationMin. Height: 135 mm / 5.3 inches,Lifting Time: 5 Sec,Max. Height: 400 mm / 15.75 inches,Gross Weight: 43 lb/19.5 kg,Capacity: 3.0 tons / 6600 lbs,Air Inlet: G1/4,Color: Red,Model: Red Triple Bag Jack,Material: Steel + Rubber,Working Temp: -60℃~ 50℃

Spare Parts to suit Kennedy Trolley Jacks

Heavy-duty chassis with one-piece hydraulic unit. Handle mounted safety release prevents inadvertent lowering. Includes large diameter saddle for easier positioning under the jacking point. Foot oper more→ated quick lift system. Fitted with safety overload valve. Integral tool tray for convenience and wheel nut retention. Rubber jack pad to prevent damage to the underside of the vehicles jacking point.5 Tonne Long Reach Trolley Jack• Min./Max. Saddle Height: 150/600mm.• Heavy-duty chassis with one-piece hydraulic unit.• Handle mounted safety release prevents inadvertent lowering.• Includes large diameter saddle for easier positioning under the jacking point.• Foot operated quick lift

Twin piston Rocket Lift feature brings saddle to maximum height in minimal strokes. Universal joint release mechanism allows safer, more controlled lowering of jack. Profiled lifting arm gives low cle more→arance height of just 85mm making it suitable for sports and custom cars. Heavy-duty steel chassis provides stability and endurance. Fitted with an overload valve for added safety. Hydraulic oil by-pass system protects ram from being overextended.

The B-G Racing F3 Swivel Jack features an easy adjustment system which can alter the lift height of the car.The F3 Swivel Jack features large diameter wheels and tyres which ensure easier moving aroun more→d the pitlane and straightforward positioning below the car. The F3 Swivel Jack is constructed from mild steel which is then powder coated for durability, altogether finished to an excellent quality. The powder coat is a subtle silver/grey which not only looks great but also resists chipping from general workshop wear and tear.Wheel diameter 200mm

The Clarke CTJ1500QULP combines the benefits of an ultra low profile and a quick lift trolley jack. These features are very useful for rapid operation on very low cars making it ideal for motor sports more→and mobile operators.