Car Jacks

Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle. Features & Benefits: • Min./Max. Height: 222/447mm. • Fitted more→with overload valve. • Base and reservoir machine welded. • Supplied with 2-piece handle. • Model No. PBJ8S Specifications: Model No PBJ8S Brand: Viking Capacity: 8 Tonne Hydraulic Lift: 145mm Maximum Height: 447mm Minimum Height: 222mm Nett Weight: 5.00kg Screw Extension: 80mm

All steel construction with foot operated, integral hydraulic pump and ram assembly. Fitted with platform safety lock device to prevent accidental lowering. Bike fixed by front wheel clamp, in additio more→n, four eyelets allow tie downs to be used for added stability. Fitted with a full width loading ramp. Also has a 500mm removable rear extension to assist with the removal of the rear wheel. Can be stored in an upright position. Features & Benefits: • Min./Max. Height: 205-750mm. • Platform (W x L): 333 x 2060mm. • All steel construction with foot operated, integral hydraulic pump and ram assembly. • Fitted with platform safety lock device to prevent accidental lowering. • Bike fixed by front w…

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one en more→d (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 3m x 90mm, 3 Tonne

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength more→polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Replacement hydraulic ram for SC10.V3 engine crane. Features & Benefits: • Replacement hydraulic ram for SC10.V3 engine crane. • Model No. SC10.V3-E Specifications: Model No SC10.V3-E Brand: Sealey more→Nett Weight: 9.6kg Ram Capacity: 3000kg Ram Diameter: 27.88mm Ram Travel: 515mm Pump Type: Single Speed Ram Pin Hole Diameter: 16.5mm Clevis Pin Hole Diameter: 16.5mm Mounting Point Distance (Min.): 635mm Overall Length (Min.): 670mm Base Mount Type: Double Clevis

Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as more→a pulling clamp. Low profile afforded by integral pivot/lifting point. Features & Benefits: • Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. • Low profile afforded by integral pivot/lifting point. • Model No. BC2000 Specifications: Model No BC2000 Adjustable Beam Width: 75-220mm Brand: Sealey Capacity: 2000kg Dimensions: (A) - 26…

The Carasafe Ratchet Caravan Jack is good quality and sturdy. It has an integrated ratchet operation for easier lifting and lowering, supplied with the wrench handle. Maximum lifting capacity of 1000k more→g.A caravan jack with integrated ratchet operationWrench handle includedMaximum lift: 1000kgWeight: 2.2kgDimensions: 380 x 95 x 80mmMin / Max height: 100mm / 350mm

Jacking beam lifts load with compressed air. Fully certified and approved to comply with MOT requirements. Wide lift configuration meets MOT recommendation for lifting on jacking point. This item is h more→eavy. Extra assistance must be provided at the delivery point to help its safe delivery. Features & Benefits: • Jacking beam lifts load with compressed air • Fully certified and approved to comply with MOT requirements • Wide lift configuration meets MOT recommendation for lifting on jacking point • 2 Year guarantee* • This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery Specifications: • Model No SJBEX3000S • Air …

Heavy-duty high level stand to safely support vehicles when wheel free operations are being carried out. Independently UK load tested. Supplied with three interchangeable crutches for even load suppor more→t. Heavy gauge steel frame and welded construction give superior strength and safety. Features captive, spring-assisted, multi-position pin load support and retracting castors for easy manoeuvrability. Ideal for commercial vehicles. Sold as singles, but MUST be used in pairs, or multiples of. Features & Benefits: • Min. Working Height (Shallow/Deep/V): 1315/1315/1340mm. • Max. Working Height (Shallow/Deep/V): 1835/1835/1860mm. • Heavy-duty 7 Tonne high level support stand. • Safely supports vehicles…