Car Jacks

Twin-piston, quick lift facility - just five pumps to reach maximum height
Lifting range 88-358mm
Integrated rubber saddle pad prevents damage to underside of vehicle
EVA foam handle to prevent panel damage
Knurled handle for extra grip
Twin safety overload valves
Rear swivelling castors
Manufactured to EN 1494 Specification
Draper 12 months parts and labour warranty

• Steel chassis with PVC rollers and four ø100mm nylon castors.• Pedal operated hydraulic lifting action with safety locking pin when under load.• Rollers cradle vehicle’s tyre and are capable of handling up to 270mm in width.• Suitable for bodyshops, garages, showrooms or anywhere an immobile vehicle needs moving on an even surface.• Capacity: 650kg.• Maximum Opening: 550mm.• Maximum Tyre Profile: 270mm.• Weight: 17kg.• Note: Skates sold as singles, but must be used in pairs.Steel chassis with PVC rollers and four ø100mm nylon castors. Pedal operated hydraulic lifting action with safety locking pin when under load. Rollers cradle vehicle’s tyre and are capable of handling up to 270m…

• Quick Lift feature to reduce the time and effort needed to get saddle to gearbox.• Only a maximum of 42 pumps needed to reach full height.• Single foot pedal operation keeps hands-free during lifting process.• Spring loaded dead man's safety release control reduces the risk of inadvertent lowering.• 2-Way hydraulic unit ensures that the saddle lowers at a controlled speed at all times, even without load.• Hydraulic unit larger than the economy models for improved performance and durability.• Saddle is reversible allowing a jack pad to be fitted to support items other than transmissions.• Castors and side handle make the units easily manoeuvrable.• Suitable for use with optional Adjustable Gearbox…

Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one end (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Low entry engine crane with a height of only 100mm at the wheels.• Weighs only 37kg so is extremely lightweight and manoeuvrable.• Heavy-duty castors and pump access from side, for safe handling of loads.• Delivered in knock-down form to reduce freight costs, some self-assembly required.Low entry engine crane with a height of only 100mm at the wheels. Weighs only 37kg so is extremely lightweight and manoeuvrable. Heavy-duty castors and pump access from side, for safe handling of loads. Delivered in knock-down form to reduce freight costs, some self-assembly required.• Low entry engine crane with a height of only 100mm at the wheels. • Weighs only 37kg so is extremely lightweight and manoeuvr…

Ideal for workshop or roadside use, this jack takes the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead man’s handle which also aids controlled lowering speed. Supplied with extensions that close the gap between the saddle of the jack and the jacking point. See table for detailed specification. Features & Benefits: • Max. Height (inc. extn.): 472mm @ 15tonne, 393mm @ 30tonne. • Air Consumption: 10.5cfm. • Spring loaded dead man's control. • Handle locks in position at three different angles. • Lifts heavy plant, tractors and commercial vehicles. • Extensions: 45, 75mm. • Model No. YAJ15-30

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…

• Triple castor wheel design allows a stabile multi-directional movement of motorcycle once lifted.• Features width adjustment from 185 to 265mm, making it suitable for most types of motorcycle. • Design ensures rim and tyre protection at all times.• Once the bike is supported, allows easy removal and cleaning of front wheel.• Please note: All front paddock stands need to be used in conjunction with a suitable rear stand to ensure bike stability (See Model No's RPS2 or, for full floating movement, use RPS2MD).Technical SpecificationNett Weight: 6.4kg