Car Jacks

Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. All models supplied with 90° rotating pump and telescopic pump handle. Fitted with moulded carry handle incorporating storage for the pump handle. Service kit readily available.

Portable Trolley Jack Kit for light domestic use. Ideal for roadside recovery. Package includes: 1020LEO - Trolley Jack 2tonne Low Entry Short Chassis - Orange AP600JB - Trolley Jack Bag 600mm AS2000F - Axle Stands (Pair) 2tonne Capacity per Stand - Folding Type WCF01 - Folding Wheel Chocks - Pair S0472 - 3pc 1/2"Sq Drive Extendable L-Bar Wrench Set You may also refer to the individual Model No. for full specification.

Type:Furniture Lifter Material:ABS Size：34*10*10cm 1 The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom’s policies and EU Product Safety and Compliance laws.

The JCB-TH33007 is a robust and durable double-pump hydraulic trolley jack designed to offer a maximum lifting capacity of up to 3 tonnes in weight.Constructed with a high quality and heavy-duty steel frame, the JCB-TH33007 is capable of lifting SUVs, cars, light commercial vehicles and any other vehicle which requires high ground clearance up to 465mm in height.Thanks to its double-piston design, the JCB-TH33007 is a quick-lift trolley jack, which will save you precious time and effort in comparison to a single-piston counterpart.The JCB-TH33007 is also equipped with swivel rear wheels and a saddle to provide smooth manoeuvring and positioning of the jack, while its integrated protection rubber …

Protective Rubber Pad for trolley jack 1pcs designed for BMW models Jack Pad Size: 71 x 25mm Made of high quality rubber, will not damage the vehicle. Intended for BMW | Suitable for most floor jacks and lifts This is a high-quality HEYNER German product

Pit Jack 0,5 Ton Note: Image is for illustrative purposes only and may differ from the actual product

Heavy Duty Car Scissor Jack / Lift Jack With Ratchet For easy use Quick Car Lift Jack Sizes: 2 tons. Lifting range: 98 - 442. Working stroke: 320-440mm Car Scissor jack supplied with carry case Floor jack Suitable for Car, Van, SUV Equipped with a practical rotating saddle including a rubber pad and a sturdy crank with handle. HEYNER is German manufacturer of quality automotive tools and lifting equipment such as bottle jacks, axle jack stands, lift jacks and trolley jacks. Car Van Scissor Jack Supplied with handle, ratchet and carry case and 20cm extension bar. This kit allows users to apply increased force and leverage when turning the handle, facilitating easier lifting or lowering of …

VEVOR Pneumatic Jacks,6600 lbs(3.0Ton) Pneumatic Car Jack with Portable Handle,triple bag jack Thickened Rubber for soft and easy to collapse terrain, water on sand or muddy roads6600lbs Loading Capacity5.3"-15.75" Lifting RangeSolid ConstructionEasy OperationEasy to StoreWide ApplicationMin. Height: 135 mm / 5.3 inches,Lifting Time: 5 Sec,Max. Height: 400 mm / 15.75 inches,Gross Weight: 43 lb/19.5 kg,Capacity: 3.0 tons / 6600 lbs,Air Inlet: G1/4,Color: Red,Model: Red Triple Bag Jack,Material: Steel + Rubber,Working Temp: -60℃~ 50℃

Scissor Jack 1.5 ton suitable for VW cars with dedicated VW/SKODA lifting slot Max. working stroke 250-385mm. Mix. lifting height (folded) 104mm. Max. lifting height (full lifted) 400mm The lift jack Can be used with 17 mm socket, incl. comfort extension bar, ratchet with practical rotary knob for easy cranking up Fits VW Lift Jack with ratchet, extension bar and storage bag | The jack will fit small and medium sized models such as Golf, Scirocco, UP Equipped with a practical rotating saddle including a rubber pad and a sturdy crank with handle. HEYNER is German manufacturer of quality automotive tools and lifting equipment such as bottle jacks, axle jack stands, lift jacks and trolley …

Furniture mover, hydraulic, pack of 2, max. load 2000 kg, lift 200 mm. Supplied = assembled. Lift = 200 mm. Max. load = 2000 kg. Frame material = steel. Frame colour = light blue RAL 5012. Width = 660 mm. Height = 1000 mm. Depth = 420 mm. Wheel diameter = 150 mm. Wheel fittings = heavy duty wheels. Wheel bearing = ball bearing. Wheel type = non-marking. Finish = zinc plated and powder coated. Footplate width = 590 mm. Footplate depth = 80 mm. Lifting range = 8 - 200 mm. Product type = furniture transport units. Application = diverse. Ideal for moves, maintenance or fitting. Non-marking wheel tyres for protecting carpets and floors. Completely assembled and ready for immediate use. Ship heavy …

Bottle jack, with hydraulic unit, max. load 2 t. Supplied = assembled. Max. load = 2 t. Lifting range with lifting head = 158 - 298 mm. Lift = 90 mm. Weight = 2.2 kg. Overall height from - to = 158 - 298 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle accessory.

Bottle Jack / Max Load 6 t

The SJBEX200 features a two-stage mechanical safety lock and telescopic finger guard to prevent injury. This combined with a wide lift function that is fully certified and approved to VOSA requirements makes it ideal for lifting vehicles on a ramp. The beam has spring loaded flat arms with roller bearings and when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp and firmly stabilise the unit. Completing this jacking beam is a solid construction allowing it to be able to support up to 2 tonnes in weight.

Lightweight and fast lift, ideal for bodyshops, tyre bays etc. Supplied with 75mm removable support cup.Min height 115mm, max height 430mm. Working pressure: 8 bar, lifting time 3 seconds, pressure blow off valve. To be used in conjunction with axle stands.

Lifter, with hydraulic unit and nickel plating, type V5, max. load 5 t. Supplied = assembled. Max. load = 5 t. Lifting range with lifting head = 252 - 392 mm. Lifting range with lifting toe = 15 - 165 mm. Lift = 140 mm. Max. load with lifting head = 5 t. Max. load with lifting toe = 5 t. Weight = 21 kg. Product type = hydraulic jacks. Specifically for cleanrooms (foodstuffs, pharmaceuticals, etc.). Can also be used where space is tight due to the compact design. High quality, compact steel construction fully nickel plated. A compact and powerful device is particularly useful for lifting and positioning heavy machine tools or similar equipment. Regardless of whether for production operations,…

3 tonne capacity. One stroke instant lift foot pedal, raises the saddle up to jack point to increase productivity. Features and Benefits Constructed from heavy gauge steel 1m, two-piece handle 120mm diameter saddle Automatic safety overload protection Positive twist, lock and release mechanism Heavy duty rear swivelling castor wheels. Notes Maximum load: 3000kg. Minimum height: 145mm. Maximum height: 490mm.