Effects Pedals

An analog modeling preamplifier and DI box designed for bass. It has a wide range of sound settings, from classic tube to sharp slap and aggressive distortion sound. In addition, it offers direct record output, V-TONE to simulate the sound of well-known vintage amplifiers and other audio options. The device can be used as a direct recording preamplifier with speaker simulation or as an active standard DI box. The effect has a built-in 6.3 mm mono jack input and output, a gold plated XLR connector and a ground lift switch. Powered by 9 V battery or DC adapter (not included).
Made in: China
Тype: Preamp;DI Box
UK/EU Power supply included: No
Battery Detail: Al/Mn

Analogue modelling acoustic guitar preamp/stompbox with DI recording output that has been designed to compete head to head with leading products on the market. Its authentic tube/microphone modelling circuitry provides the natural warmth and presence, as if the acoustic guitar was miked through a tube pre-amp. It features the ultra-musical 3-band EQ with sweepable mids for accurate feedback control and to eliminate the harsh harmonics of piezo pickups; dual DI mode for either direct recording output with tube/microphone emulation or standard active direct injection box in bypass mode; and ground lift switch that eliminates typical ground loop problems. Device has super-high impedance to retain …

Robust 7-band EQ pedal for electric and electric-acoustic guitar that shapes the sound and eliminates unwanted feedback. Pedal offers a wide frequency range – from 100 Hz to 6.4 kHz, with a powerful 15 dB boost or cut of each EQ band. It is equipped with a first-class electronic on/off switch for highest signal integrity n bypass mode, and status LED for on/off and battery check. Powered by 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 123 mm. Weight: 330 g.
Battery Operation: Yes
Made in: China
UK/EU Power supply included: No
Тype: Equalizer
Power Supply: Adapter

Compact 7-band graphic equalizer pedal with wide frequency range from 50 Hz to 10 kHz for electric bass guitar that provides total shaping control over the tone and eliminates feedback. 7 frequency bands (50, 120, 400, 500, 800 Hz; 4.5, 10 kHz) with a 15 dB of Boost/Cut provide extensive tone-shaping options, while first-class electronic on/off switch ensures noise-free operation. Pedal also features status LED for effect on/off and battery check. It can be powered by 9 V battery or 9 V adapter PSU (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Power Supply: Adapter
Battery Operation: Yes
UK/EU Power supply included: No
Made in: China
Тype: Equalizer
Battery Detail: Al/Mn…

Pedal Design Foot Pedal

Fuzz/distortion effect pedal for guitars that recreates the gamut of famous fuzz tones from the 60’s and 70’s and offers switch for 3 different sound modes: Fuzz 1 (classic fuzz), Fuzz 2 (grunge) and gain Boost. It provides dedicated Gain, Bass, Treble and Level, controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g..
Power Supply: Adapter
UK/EU Power supply included: No
Тype: Fuzz
Made in: China
Battery Operation: Yes

Overdrive and distortion pedal for electric guitar that combines the overdrive and distortion effects for a wide range of tones, suitable for use with both single-coil and humbucker pickups. It features dedicated Level, Tone, Drive and Mode controls, status LED for effect on/off and battery check, and first-class noiseless electronic on/off switch that maintains excellent signal integrity in bypass mode. Pedal is equipped with 1/4" input and output, and can be powered by 9 V battery or PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: 330 g.
Тype: Overdrive;Distortion
Made in: China
UK/EU Power supply included: No

Pedal Design Foot Pedal

Setting up amps, dialing in tones and positioning mics takes a lot of time and patience. Step on the amazing TUBE AMP MODELER TM300 and skip straight to the good part! The TM300 features authentic modeling technology for 3 classic guitar amps, 3 gain modes and 3 mic placements for a total of 27 configurations that let you easily achieve the most sought-after tube amp sounds – from clean to crunch to super-fat distortion.
Тype: Distortion;Equalizer;Tube Amp Modeler
UK/EU Power supply included: No
Battery Operation: Yes
Power Supply: Adapter
Made in: China

Passive Cabinet Merger. The concept behind Palmer's Cab Merger may be very simple, but the unit fills an important gap! Have you ever wanted to connect two guitar cabinets to just one amplifier output? It's quite simple with the PCABM! In addition, you can choose parallel or series wiring. For instance, two 8 ohm cabinets can be connected for a total load of 4 ohms (parallel) or 16 ohms (in series). The device is entirely passive and does not affect tone in any way. Dimensions: 105 x 35 x 35 mm, weight: 0,13 kg
Тype: DI Box
UK/EU Power supply included: No
Made in: Germany

Flanger / Pedal Design Foot Pedal / Effects Flanger

Pedal Design Foot Pedal

Reissue series drive pedal for guitar or bass. The Steel Singer Drive simulates a high end boutique tube amplifier, delivering a transparent mild to medium driven gain, much revered by many famous guitar players. All analog circuitry ensures a pure signal path and a filter control provides a single intuitive EQ adjustment. Subtle gain to smoothly overdriven tones for blues, pop and rock styles. Features: Pure analogue amplifier simulation True bypass hardware switching Volume, Gain & Filter controls Specifications: Battery: 9V PP3 (supplied) Power supply: Optional 9Vdc 300mA regulated (not supplied) Controls: Volume, Gain, Filter & foot switch Input impedance: 1M Ohms Output impedance: 10k …

Reissue series high gain distortion pedal for guitar or bass. The Recto Distortion simulates a hard driven US voiced tube amplifier with a tight bass response for heavy metal and grunge guitar styles. All analogue circuitry ensures a pure signal path and 2-band EQ helps to tailor the frequency response as needed. Powerful tones for heavy riff and barre chord driven rock. Features: Pure analog amplifier simulation True bypass hardware switching Gain, Master & 2-band EQ controls Specifications: Battery: 9V PP3 (supplied) Power supply: Optional 9Vdc 300mA regulated (not supplied) Controls: Gain, Master, Bass, Treble & foot switch Input impedance: 1M Ohms Output impedance: 10k Ohms Dimensions: …

Bass guitar headphone amplifier from amPlug 2 series that is designed specifically for low frequencies, offering a wide-range response. It delivers three modes and features a dramatically improved analogue circuit. It also provides a rhythm function, foldable plug mechanism that rotates 180 degrees and an auto power-off function for improved convenience and ease of use. The pre-amplifier is powered by two AAA batteries (up to 11 hours of operation time, 17 with RHYTHM off), and provides a headphone output and an aux input. AAA alkaline batteries are included.
Controls: Volume/Tempo;Tone;Rhythm;Volume
Battery Type: AAA
Headphone Output: Yes
Battery Operation: Yes
Compressor: Yes
MP3 / Line In: …

Sound buffer that protects against signal amount and quality loss which happens with large pedalboards with many pedals and with long cables. This buffer compensates for the loss of the signal and can work at the beginning or at the end of the effect line and doesn’t need any controls. Thanks to the components being used, the amount of hum is minimum. RockBoard Natural Sound buffer is encased in a durable metal construction, houses In/Out Jack inputs and is powered by a 9V power supply, which is not included.
Colour: Black
Inputs: Mono
Battery Operation: No
True Bypass: None;No
Outputs: Mono
Made in: China
Power Supply: 9V DC ( - )
UK/EU Power supply included: No
Тype: Buffer
Length (cm): 7.4…

Volume Pedal

Compressor

As far as versatile and ubiquitous effects go, an overdrive emulating a pushed tube amp is number one. El Mocambo will fatten up your tone with some extra girth around the waist, giving you that highly sought-after mid-range "oomph" that cuts through the mix when your band is pushing decibels. This particular gritty mid-range honk gives the guitar a certain vocal quality that is ideal for a singing blues solo but also works formidably in a hard rock setting as a lead boost on top of an already overdriven sound. El Mocambo Overdrive features a distinct mid-range boost when engaged. This can help warm up a tone that's a bit too jangly to cut through a loud rhythm section and also gives a certain …

NU-X Morning Star is a blues drive pedal with a twist. Along with standard Drive, Level and Tone controls, holding the on/off pedal engages a Shine mode, which boosts the high frequencies adding sparkle to cut through a mix. Wide ranging gain adjustment offers tones from natural break-up to thick authentic overdrive. Enough range for blues to full-on rock styles. Features: Drive, Tone and Level controls True or buffered bypass operation Switchable Shine treble boost effect Requires 9V centre negative DC Power Supply 75mA current draw (Not Supplied) Specifications: Power supply: 9Vdc centre-negative power adaptor required (not included) Current consumption: 100mA Input impedance: 1M Ohm Output …

Chorus / Pedal Design Foot Pedal / Effects Chorus

Vintage-Flavored All-Analog Tremolo Pedal with 3-Knob Design and Seamless Morphing Between LFO Styles. Choka Tremolo's intuitive 3-knob layout lets you easily crank out fast waves that either cut deep or leave shallow furrows across your tone, or slow tides that ebb and flow with just the right amount of white-capped tubes you need for a satisfactory surf tone. Choka features a knob that lets you seamlessly fine tune the waveform of the LFO to your specific sound. You can either go totally triangle mode for the classic California tube amp tone or full-on square mode for dramatic chopping riffs. Of course, you can choose to be the bigger man and compromise - find the exact place between the waves …

The JOYO JF-323 Wooden Sound Acoustic Simulator pedal it is set to impress with its simulation of an acoustic sounding guitar. Turn your electric guitar into an acoustic one at the press of a button. With the latest mini pedal from JOYO the Wooden Sound Acoustic Simulator effect expands the range of your guitar tone without swapping out your guitar mid track, or compensating on the mix. With four controls, one each to adjust the High, Mid, Bass and Volume levels you can dial in the exact tone that you want. An amazingly nice pedal that punches above it's price range. Unlike a lot of acoustic simulator pedals this one actually sounds like you are playing an acoustic through a PA rather than just …

Switcher and signal splitter. A/B or A&B to Y mode switch, on/off footswitch, status LED (A: red, B: blue, Y: pink), 3 in-/outputs A/B/Y, 6,3 mm mono jack, optional AC adapter 9V DC (center minus plug), can be used w/o power supply (LED stays off), metal housing, dimensions (D x W x H): 93,5 mm x 42 mm x 52 mm, weight: 160 g
Power Supply: Adapter;9V
Made in: China
UK/EU Power supply included: No