Jigsaw Blades

The Starlock Snap-In mounting system allows fast blade removal and exchange within 3 seconds without having to touch the blade. The mounting system produces the highest power transfer thanks to a 3-dimensional tight-fitting connection between machine and accessory.Features:- BIM combination of an HCS blade and HSS teeth resists wear and heat- 3-dimensional Japanese tooth configuration minimises heat development for prolonged usage- Starlock mount for optimum power transfer and convenient blade change within 3 seconds.- Starlock Snap-In mounting system for fast blade removal and exchange within 3 seconds without having to touch the blade- Rounded cutting edge (Curved-Tec) ensures minimal tooth …

The hooked tip is useful for removing creepers and cutting twigs. Super Turbocut teeth provide effortless cutting of wood in all directions. the bark cutter prevents the peeling-off of remaining bark when a branch is cut. It is also convenient to remove twigs and creepers. A notch in the cutting blade allows the saw to be hung on a branch during the pruning. The two section pole can readily be extended to a desired length by operating the lever and buttons.Features & Benefits:• JG-1 Grip• SH-UV Sheath• Curved Blade• Seperate bark cutterSpecifications:Surface Finishing: Hard-Chrome PlatingMaterial: High-Carbon SteelTooth Type: SUPER TURBOCUTImpulse Hardened: NoTooth Pitch: …

The hooked tip is useful for removing creepers and cutting twigs. Super Turbocut teeth provide effortless cutting of wood in all directions. the bark cutter prevents the peeling-off of remaining bark when a branch is cut. It is also convenient to remove twigs and creepers. A notch in the cutting blade allows the saw to be hung on a branch during the pruning. The two section pole can readily be extended to a desired length by operating the lever and buttons.Features & Benefits:• JG-1 Grip• SH-UV Sheath• Curved Blade• Integral bark cutterSpecifications:Surface Finishing: Chemical NickeledMaterial: Strip SteelTooth Type: SUPER TURBOCUTImpulse Hardened: NoTooth Pitch: 4.5mmTooth …

• E-Cut Carbide Pro• TiN-coated carbide plunge-cut saw blade with extremely good resistance to wear. Lasts 100% longer than uncoated carbide saw blades. Lasts 30 times longer than HSS saw blades. The right choice for tough materials, such as ferrous metals, stainless steel or copper pipes. Can even be used for hardened screws (Spax) and high-strength machine screws. But also ideally suited to abrasive materials, such as bricks, masonry or fibre cement boards as well as laminate, carbon fibre-reinforced plastic and fibreglass-reinforced plastic. Good cutting results and cutting quality in all timber materials, such as hardwood or chipboard.• Narrow, with waist for optimum cutting …

EXPERT MetalMax for Long Life Cutting Hard Metal:- When hardened screws rust or otherwise get stuck, cutting them off perfectly flat to the surface is the only option. The EXPERT MetalMax makes a perfect flush cut even in hardened metal and, with its outstanding longevity, is the perfect accessory for the tradesman wanting to cut tough materials with a multitool.- You've seen the multitool's astonishing ability to cut into and through wood with ease: with the Bosch EXPERT MetalMax Blade for Multitool metal gets the same treatment. It even cuts hardened window screws and rebar with ease.Features:- Long Life Cutting Hard Metal- Exceptional durability is built in with Bosch Carbide Technology- …

The Vitrex 10 3412 Ultimate Diamond Blade is suitable for use in a tile cutter and has both high strength and durability. It has a continuous rim which produces extra clean cuts on ceramic, porcelain, granite, marble and natural stone. In addition, it helps to prevent chipping and cracking of tiles, which can be a common problem. For use with Vitrex Electric Cutters WS560180, 103420, 103421 and 103430. Diameter: 200mm.Additional Information:• Diameter: 200mm

Compatibility - Check compatibility with other FEIN machines (see description below)
Slim, tapered shape for optimal cutting speed and good chip removal
Fit For Any Job - Fein Tool is available in two mount types, so one can find the ideal accessory for multifunctional tool. Whether it's StarLock or Fein SuperCut 12-sided mount, there's a Fein Tool that suits needs

• E-Cut Carbide Pro• TiN-coated carbide plunge-cut saw blade with extremely good resistance to wear. Lasts 100% longer than uncoated carbide saw blades. Lasts 30 times longer than HSS saw blades. The right choice for tough materials, such as ferrous metals, stainless steel or copper pipes. Can even be used for hardened screws (Spax) and high-strength machine screws. But also ideally suited to abrasive materials, such as bricks, masonry or fibre cement boards as well as laminate, carbon fibre-reinforced plastic and fibreglass-reinforced plastic. Good cutting results and cutting quality in all timber materials, such as hardwood or chipboard.• Narrow, with waist for optimum cutting …

Designed to fit both Makita and other manufacturer’s saws, tip embedded, or “Deep Tooth” blades are especially tough and hard wearing. Easily copes with knotty wood and will slice through nail and screw embedded timber without damaging teeth. Suitable for reclaimed timber and demolition work. Features & Benefits • Nail and Knot Cutting • Extremely tough and hard wearing • Extended service life and productivity Specifications • Bore: 30mm • Diameter: 305mm • Kerf: 2.3mm • Rake: 5° • Thickness: 1.8mm • Tooth Count: 32 • Material Type: Wood/Nails • Machine Type: Mitre saw

Designed to fit both Makita and other manufacturer’s saws, tip embedded, or “Deep Tooth” blades are especially tough and hard wearing. Easily copes with knotty wood and will slice through nail and screw embedded timber without damaging teeth. Suitable for reclaimed timber and demolition work. Features & Benefits • Nail and Knot Cutting • Extremely tough and hard wearing • Extended service life and productivity Specifications • Bore: 30mm • Diameter: 260mm • Kerf: 2.3mm • Rake: 5° • Thickness: 1.8mm • Tooth Count: 64 • Material Type: Wood/Nails • Machine Type: Mitre saw

FEATURES:- Operating length: 430 mm- For simple cuts in vertically perforated bricks

The Makita TMA053 Plunge Cut Starlock Saw Blade is a popular Starlock multi-tool plunge cut saw blade suitable for cutting wood. Specifications • Diameter: 32x50mm • Material Type: BiM • Application: Wood • Tooth Count: 14 TPI • Pack Quantity: 5 Contents • 5x Makita TMA053 Plunge Cut Starlock Saw Blade

High wear and heat resistant teeth made from HSS-Steel (High Speed Steel) offer a long lifetime in non-ferrous (soft) metal and abrasive materials. The Starlock Snap-In mounting system allows fast blade removal and exchange within 3 seconds without having to touch the blade. The mounting system produces the highest power transfer thanks to a 3-dimensional tight-fitting connection between machine and accessory. It is suitable for use with all Starlock, Starlock Plus and Starlock Max power tools as well as common multi-tools.Features:Starlock AIZ 32 APB blade guarantees exact flush and deep plunge cuts in wood, metal and plastics.- Precise cuts due to rounded cutting edge called Curved-Tec- Sturdy …

Expert Metalmax For Long Life Cutting Hard Metal:- When hardened screws rust or otherwise get stuck, cutting them off perfectly flat to the surface is the only option. The EXPERT MetalMax makes a perfect flush cut even in hardened metal and, with its outstanding longevity, is the perfect accessory for the tradesman wanting to cut tough materials with a multitool.- You've seen the multitool's astonishing ability to cut into and through wood with ease: with the Bosch EXPERT MetalMax Blade for Multitool metal gets the same treatment. It even cuts hardened window screws and rebar with ease.Features:- Long Life Cutting Hard Metal- Extreme durability is built in with Bosch Carbide Technology- Extra …

• E-Cut Carbide Pro• TiN-coated carbide plunge-cut saw blade with extremely good resistance to wear. Lasts 100% longer than uncoated carbide saw blades. Lasts 30 times longer than HSS saw blades. The right choice for tough materials, such as ferrous metals, stainless steel or copper pipes. Can even be used for hardened screws (Spax) and high-strength machine screws. But also ideally suited to abrasive materials, such as bricks, masonry or fibre cement boards as well as laminate, carbon fibre-reinforced plastic and fibreglass-reinforced plastic. Good cutting results and cutting quality in all timber materials, such as hardwood or chipboard.• Narrow, with waist for optimum cutting …

Lasts up to 50x longer than a Bi-Metal bladeWhether you work on buildings or vehicles, a multitool blade that makes a great cut in any material can make working life a lot easier. Integrating all of Bosch’s most advanced manufacturing techniques, the Expert MultiMax brings unrivalled versatility to your multitool.This top-of-the-range multitool blade boasts the very latest in Bosch Carbide Technology: its strip of ultra-hard teeth use Bosch’s unique Curved-Tec design, so it is the first blade to manage chatter-free plunge cuts in sheet metal. Additionally, the latest incarnation of the Expert MultiMax boasts extra coating on its carbide teeth for even greater longevity.Bosch Curved-Tec blades beca…

• E-Cut Carbide Pro• TiN-coated carbide plunge-cut saw blade with extremely good resistance to wear. Lasts 100% longer than uncoated carbide saw blades. Lasts 30 times longer than HSS saw blades. The right choice for tough materials, such as ferrous metals, stainless steel or copper pipes. Can even be used for hardened screws (Spax) and high-strength machine screws. But also ideally suited to abrasive materials, such as bricks, masonry or fibre cement boards as well as laminate, carbon fibre-reinforced plastic and fibreglass-reinforced plastic. Good cutting results and cutting quality in all timber materials, such as hardwood or chipboard.• Narrow, with waist for optimum cutting …

Package dimensions (L x W x H): 95.0 x 195.0 x 37.0 mm
Package Weight: 180g
Number of packs: 1
Country of origin: Germany

Lasts up to 50x longer than a Bi-Metal bladeWhen hardened screws rust or otherwise get stuck, cutting them off perfectly flat to the surface is the only option. The Expert MetalMax makes a perfect flush cut even in hardened metal and, with its outstanding longevity, is the perfect accessory for the tradesman wanting to cut tough materials with a multitool.The Expert MetalMax is at the very cutting edge of Bosch Carbide Technology. Not only are its teeth made from a strip of extremely hard metal that can cut even stainless steel, it also boasts a high-tech extra coating for maximum longevity. The flat edge is optimised for cut-offs as it is less prone to skidding on screws or pipes.You’ve seen th…

The Starlock ACZ 70 RT5 blade guarantees extra-fine cuts for routing grout and abrasive. Its extremely thin blade with a 1.6 mm cutting width creates precise fine cuts. The extra-slender cutting edge is coated with a high-quality fine grit 50 for distinctively thin cuts. This accessory offers perfect results when routing extra-thin grout joints between tiles, or even grooves in porous concrete and soft brick for the laying of concealed cables and pipes. It can also cut precise recesses in difficult abrasive materials such as cement-bonded fibre boards and epoxy/glass fibre-reinforced plastic. It is suitable for use with all Starlock, Starlock Plus and Starlock Max power tools as well as common …

Lasts up to 50x longer than a Bi-Metal bladeStriking cement behind a doorframe or under a floorboard used to bring work to a halt for an expensive blade change. Not with the Expert MultiMaterial Segment, a blade tough enough to cut grout and mortar as well as solid surface counter tops and abrasive laminates and composites. It just keeps on going.With its wide body and large curve of sharp carbide teeth, the Expert MultiMaterial Segment Blade offers both precision and stability, combined with the extreme durability of Bosch Carbide Technology. Its extremely hard tooth strip, achieved through advanced manufacturing expertise, cuts the toughest and most abrasive materials.The Bosch Expert MultiMaterial …

Lasts up to 50 times longer than a bimetal blade
Outstanding service life thanks to Bosch Carbide Technology
Starlock intake for maximum power transmission and convenient blade change within 3 seconds.
Ideal for cutting metal: for flush cuts such as cutting hardened screws and nails
Cutting tough metal pipes and a variety of hardened metals with an oscillating multi-tool.

The Starlock ACZ 85 RT3 blade provides extra-long life when routing grout and abrasive material. Its edge is coated with a high-quality carbide with grit 30 for extended wear resistance. This cutter is ideal for routing standard-width grout joints between tiles and grooves in porous concrete. It is also suitable for routing smaller cutouts and recesses in soft wall tiles, cement-bonded fibre boards and fibre-reinforced composites. It is designed for use with all Starlock, Starlock Plus and Starlock Max power tools as well as common multi-tools. The pointed segment saw blade ends enable cutting right into tight corners while the round blade body design enables straight cuts. The Starlock Snap-In …

This Faithfull Saw Blade has a broad range of applications with ground, side set, hardened teeth. Quick cutting performance in softwood, plastics, plasterboard, plastic pipes and similar materials. Compatible with many multi-function oscillating power tools. Width: 34mm.100 x Faithfull Multi-Functional Tool CrV Flush Cut Wood Blade Side Set 34mmAdditional Information:• Type/Use: Wood• Size: 34mm• Pack Qty.: 100