Multi Tool Blades

Ideal for polishing metals and plastics. Using polishing compound no. 421 with wheels produces a high luster. Use 414, 422 and 429 with mandrel 401. Use 423 and 425 with mandrel 402.Specifications:Shank diameter: 3,2 mm Working diameter: 22,5 mmPack of 4

Effortlessly drill up to 5cm into the workpiece with maximum control.Use the Dremel Workstation to hang your multi-tool while using the Dremel Flex Shaft (225).Bring the workpiece closer to the multi-tool using the Workstation as a stationary tool holder.The metal base keeps the Workstation stable, with tools and workpiece safe from damage.Contents:1 Dremel Workstation and 1 manual/quick start guide.Length:15.2:cm.Width:15.2:cm.Depth:30.48:cm.SOL Date:01.01.2016:Withdrawn:no:Reasons to purchase it (online distributor):Drills up to 5 cm effortlessly in the workpiece with maximum control:Product box length:18.6:cm.Product box height:35.4:cm.Product box width:19.7:cm.Units per pallet:48:Use the …

Wood Cutting Wheels are both carbide cutting wheels for slicing, cutting and shaping on woods and laminates. Ideal for short cuts in wooden floors to make room for e.g. heating pipes or electronics or model making. The carbide coating makes this wheel very durable.We recommend using a (two-handed) golf grip when using this accessory, and using the right angle attachment when a cut is hard to reach. To keep the disc life as long as possible, do not apply excessive pressure and do not exceed the RPM limits. This cut-off disk can be used on different wood types, like chipboard, hardwood, softwood, laminate, fiberboard, or even on plastics and laminates. Do not use them on metals.Recommended speed:- …

The 562 is designed to work on ceramic wall tile (tile suitable for use only on a wall), not for use on floor tiles. Best for cutting and drilling materials like ceramic wall tiles and mosaics.We recommend to use this bit with the Dremel Tile Cutting Attachment, because it's designed to help you maintain depth during the application. It's important that the depth of the guide supports the cutting blade extending beyond the material by about 0.6 cm. (.25). If the bit extends out too far beyond the material, it can be more difficult to control and can actually snap the bit. Best control of the bit occurs when moving in a clockwise direction. Begin the cut at a 45 degree angle and then bring the …

This bit is used to remove the grout between tiles in e.g. Bathrooms or toilets. Ideal for replacing wall and floor grout or removing grout to replace broken tiles. The 569 grout bit tip is generally less than the distance between wall tiles (diameter of head: 3.2mm). The 570 is designed to get through floor grout and is smaller (diameter of head: 1.6mm). These bits are designed for small repair jobs. If you have a large removal requirement, you may need multiple bits to get through all of the grout. The angled attachment is designed so the bit is pulled gently through the grout – never pushed. Pushing will ruin the bit. There are two guide points on the attachment that will help keep the bi…

This bit is used to remove the grout between tiles in e.g. Bathrooms or toilets. Ideal for replacing wall and floor grout or removing grout to replace broken tiles. The 569 grout bit tip is generally less than the distance between wall tiles (diameter of head: 1.6mm). The 570 is designed to get through floor grout and is smaller (diameter of head: 3.2mm). These bits are designed for small repair jobs. If you have a large removal requirement, you may need multiple bits to get through all of the grout. The angled attachment is designed so the bit is pulled gently through the grout – never pushed. Pushing will ruin the bit. There are two guide points on the attachment that will help keep the bi…

Use your Dremel multi-tool to get the clean, defined circles you´re looking for.Use the included straight edge guide to cut or route perfectly straight lines.The circle cutter is fully adjustable up to 30 cm in diameter and allows you to create circles for different tasks.The steel design of the accessory is designed to reduce wear during use and extend its useful life in the workshop.Contents:1 Straight Edge Guide, 1 Circle Cutter Attachment, 1 Multi-Purpose Cutting Bit (561) and 1 Manual/Quick Start Guide.Length:11:cm.Width:4:in.Depth:4.5:cm.SOL Date:01.10.2020:Retired:no:Reasons to buy (online dealer):Use your Dremel multitool to get the clean, defined circles you´re looking for:Product bo…

Precision saw blade for fine, clean and straight cuts in all sorts of wood. Perfect for laminate and wood flooring or thin wood plates. Use only with Dremel Mini Saw attachment 670. Made of carbon steel, 48 offset teeth guarantee precise, fast cuts up to 6.35 mm. Blade size: 31.8 x 0.6 x 9.2mm Working diameter:31.8mm. Maximum working depth: 6.4mm. Maximum speed: 35,000rpm Essential attachment: Mini Saw Attachment Ref. 670.

This diamond-impregnated core-style bit features superior long life. Is ideal for drilling holes in both flat and contoured surfaces e.g. glass or ceramic wall. Diamond grit is a full 360-degrees around the circumference of the bit which allows it to be used in a rasping action to enlarge a hole if needed. When cutting a hole, ensure your work piece is well secured and do not apply excessive pressure to avoid cracking the glass. Apply cooling liquid or water to the material. Hold your tool at a 45 degree angle to go into the material. Then gradually lift your tool up to make a 90 degree drill. Apply drops of water / cooling liquid to the work piece for a clean drill operation. You can take the …

These versatile brushes are ideal for removing rust and corrosion, polish metal surfaces, deburr and blend surface junctures or clean electrical components. Features and Benefits Stainless steel brushes Does not cause "after rust" when used on corrosive-resistant materials like pewter, aluminum and stainless steel Shank diameter: 3.2mm Pack of 2

Use for light deburring, cleaning, polishing of silverware, jewelry and other precious metals. Can be used with polishing compound ref.421 Shank diameter: 3.2mm. Maximum speed: 15,000rpm.

For rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Sanding bands are easily replaceableSpecifications:Shank diameter: 3,2 mm Working diameter: 13,0 mm Maximum RPM: 35.000 1/minGrit: 60

For rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Sanding bands are easily replaceable.Specifications:Shank diameter: 3,2 mm Working diameter: 13,0 mm Grit: 60 Pack of 6

For rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Sanding bands are easily replaceable.Specifications:Shank diameter: 3,2 mm Working diameter: 6,4 mm Grit: 60 Pack of 6

For rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Sanding bands are easily replaceable.Specifications:Shank diameter: 3,2 mm Working diameter: 13,0 mm Grit: 120 Pack of 6

For rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Sanding bands are easily replaceable.Specifications:Shank diameter: 3,2 mm Working diameter: 6,4 mm Grit: 120 Pack of 6

Very tough bit, for material removal of fiberglass, wood or ceramic tile.Specifications:- Shank Diameter: 3,2 Mm- Working Diameter: 6,4 Mm- Accessory Length: 45,0 Mm- Width: 4,0 Mm- Length: 4,0 Mm- Height: 45,0 Mm- Maximum Rpm: 35.000 1/Min

Very tough bit, for material removal of fiberglass, wood or ceramic tile.Specifications:- Shank Diameter: 3,2 Mm- Working Diameter: 7,8 Mm- Accessory Length: 40,0 Mm- Width: 8,0 Mm- Length: 8,0 Mm- Height: 40,0 Mm- Maximum Rpm: 35.000 1/Min

Very tough bit, for material removal of fiberglass, wood or ceramic tile.Specifications:- Shank Diameter: 3,2 Mm- Working Diameter: 19 Mm- Accessory Length: 45 Mm- Width: 19 Mm- Length: 19 Mm- Height: 45 Mm- Maximum Rpm: 35.000 1/Min

Perfect for sanding flat or contoured surfaces on metal,wood, rubber or plastic.Specifications:Shank diameter: 3,2 mm Working diameter: 28,6 mm Working height: 9,5 mm Grit: 80

Finishing abrasive buffs medium + course and Finishing abrasive buffs fine. For precise and delicate material removal on metal, glass, wood and plastic. The flexible material enables to work on tight and irregularly shaped areas. These buffs can be used with mandrels 402 as well as SC402. EZ SpeedClic. Quick, Easy, Keyless.Specifications:Shank diameter: 3,2 mm Working diameter: 25,0 mm Grit: 320 Maximum RPM: 20.000 1/minPack of 2

Safely and effectively remove grout using your Dremel multi-tool and reduce the risk of damaging tiles compared to traditional methods.The 30° angle of the guides allows for precise and controlled removal of grout.Large guide windows offer excellent grout line visibility to ensure accuracy and safety.13mm depth adjustment to ensure a good result with different types of grout lines.Contents:1 grout removal guide and 1 grout removal accessory (569).Working length:19.0:mm.Length:5:cm.Width:5.5:cm.Depth:7.5:cm.SOL Date:01.10.2020:Retired:no:Reasons to purchase (online distributor):Remove grout safely and effectively using your Dremel multi-tool and reduce the risk of damaging tiles compared to t…

Piloted Corner Rounding Bit. Rounding over edges and corners. Suitable for use on Veneered woods, fibreboard, chipboard, plywood, softwood, hardwood, rubber, plastic, plexiglass and carbon Technical Specifications Shank diameter: 3.2mm. Working diameter: 6.4mm. Working length: 2mm Accessory length: 36mm Usage: straight. Maximum speed: 35,000rpm. Essential attachment: Shaper /Router table Ref.231

For rough shaping and smoothing wood and fiberglass, removing rust from metal surfaces and shaping rubber surfaces. Sanding bands are easily replaceable.Specifications:Shank diameter: 3.2 mm Working diameter: 6.4 mm Grit: 60 Pack of 2