Multi Tool Blades

This diamond-impregnated core-style bit features superior long life. Is ideal for drilling holes in both flat and contoured surfaces e.g. glass or ceramic wall. Diamond grit is a full 360-degrees around the circumference of the bit which allows it to be used in a rasping action to enlarge a hole if needed. When cutting a hole, ensure your work piece is well secured and do not apply excessive pressure to avoid cracking the glass. Apply cooling liquid or water to the material. Hold your tool at a 45 degree angle to go into the material. Then gradually lift your tool up to make a 90 degree drill. Apply drops of water / cooling liquid to the work piece for a clean drill operation. You can take the …

Precision saw blade for fine, clean and straight cuts in all sorts of wood. Perfect for laminate and wood flooring or thin wood plates. Use only with Dremel Mini Saw attachment 670. Made of carbon steel, 48 offset teeth guarantee precise, fast cuts up to 6.35 mm. Blade size: 31.8 x 0.6 x 9.2mm Working diameter:31.8mm. Maximum working depth: 6.4mm. Maximum speed: 35,000rpm Essential attachment: Mini Saw Attachment Ref. 670.

Use your Dremel multi-tool to get the clean, defined circles you´re looking for.Use the included straight edge guide to cut or route perfectly straight lines.The circle cutter is fully adjustable up to 30 cm in diameter and allows you to create circles for different tasks.The steel design of the accessory is designed to reduce wear during use and extend its useful life in the workshop.Contents:1 Straight Edge Guide, 1 Circle Cutter Attachment, 1 Multi-Purpose Cutting Bit (561) and 1 Manual/Quick Start Guide.Length:11:cm.Width:4:in.Depth:4.5:cm.SOL Date:01.10.2020:Retired:no:Reasons to buy (online dealer):Use your Dremel multitool to get the clean, defined circles you´re looking for:Product bo…

This bit is used to remove the grout between tiles in e.g. Bathrooms or toilets. Ideal for replacing wall and floor grout or removing grout to replace broken tiles. The 569 grout bit tip is generally less than the distance between wall tiles (diameter of head: 1.6mm). The 570 is designed to get through floor grout and is smaller (diameter of head: 3.2mm). These bits are designed for small repair jobs. If you have a large removal requirement, you may need multiple bits to get through all of the grout. The angled attachment is designed so the bit is pulled gently through the grout – never pushed. Pushing will ruin the bit. There are two guide points on the attachment that will help keep the bi…

This bit is used to remove the grout between tiles in e.g. Bathrooms or toilets. Ideal for replacing wall and floor grout or removing grout to replace broken tiles. The 569 grout bit tip is generally less than the distance between wall tiles (diameter of head: 3.2mm). The 570 is designed to get through floor grout and is smaller (diameter of head: 1.6mm). These bits are designed for small repair jobs. If you have a large removal requirement, you may need multiple bits to get through all of the grout. The angled attachment is designed so the bit is pulled gently through the grout – never pushed. Pushing will ruin the bit. There are two guide points on the attachment that will help keep the bi…

The 562 is designed to work on ceramic wall tile (tile suitable for use only on a wall), not for use on floor tiles. Best for cutting and drilling materials like ceramic wall tiles and mosaics.We recommend to use this bit with the Dremel Tile Cutting Attachment, because it's designed to help you maintain depth during the application. It's important that the depth of the guide supports the cutting blade extending beyond the material by about 0.6 cm. (.25). If the bit extends out too far beyond the material, it can be more difficult to control and can actually snap the bit. Best control of the bit occurs when moving in a clockwise direction. Begin the cut at a 45 degree angle and then bring the …

Wood Cutting Wheels are both carbide cutting wheels for slicing, cutting and shaping on woods and laminates. Ideal for short cuts in wooden floors to make room for e.g. heating pipes or electronics or model making. The carbide coating makes this wheel very durable.We recommend using a (two-handed) golf grip when using this accessory, and using the right angle attachment when a cut is hard to reach. To keep the disc life as long as possible, do not apply excessive pressure and do not exceed the RPM limits. This cut-off disk can be used on different wood types, like chipboard, hardwood, softwood, laminate, fiberboard, or even on plastics and laminates. Do not use them on metals.Recommended speed:- …

Effortlessly drill up to 5cm into the workpiece with maximum control.Use the Dremel Workstation to hang your multi-tool while using the Dremel Flex Shaft (225).Bring the workpiece closer to the multi-tool using the Workstation as a stationary tool holder.The metal base keeps the Workstation stable, with tools and workpiece safe from damage.Contents:1 Dremel Workstation and 1 manual/quick start guide.Length:15.2:cm.Width:15.2:cm.Depth:30.48:cm.SOL Date:01.01.2016:Withdrawn:no:Reasons to purchase it (online distributor):Drills up to 5 cm effortlessly in the workpiece with maximum control:Product box length:18.6:cm.Product box height:35.4:cm.Product box width:19.7:cm.Units per pallet:48:Use the …

Ideal for polishing metals and plastics. Using polishing compound no. 421 with wheels produces a high luster. Use 414, 422 and 429 with mandrel 401. Use 423 and 425 with mandrel 402.Specifications:Shank diameter: 3,2 mm Working diameter: 22,5 mmPack of 4

A flexible heat resistant mat that can be used to catch excessive glue and to create decorative glue design patterns: allow glue to cool and peel it off easily. The pad is suitable for all types of melted glue and can be used endlessly.Specifications:Size: 20 x 20 cm

To be used with Dremel glue gun model 940 (195 °C). To glue wooden materials.Specifications:Length: 100 mm Diameter: 11 mm Operating temperature: 165-195 °CPack of 12

To be used with Dremel glue gun model 940 (195°). Glues a variety of materials, such as wood, plastics, ceramics, carton, textile, etc.Specifications:Length: 100 mm Diameter: 11 mm Operating temperature: 165-195 °CPack of 12

Maximum durability and long-lasting performance carving bit for your most demanding DIY projects Lasts 2x longer than standard drill bit thanks to titanium nitride coating For carving, engraving, routing, etc.on a wide range of materials, including wood, soft metals and plastics Contents:2 Dremel® Max carving bits 6.4 mm (117DM).Shank diameter:3.2:mm.Working diameter:6.4:mm.Accessories length:38.0:mm.Width:6.0:mm.Length:6.0:mm.Height:38.0:mm.Maximum rpm:35,000:rpm.SOL Date:01.05.2021:Retired:no:Reasons to purchase it (online distributor):Carving bit with maximum durability and long-lasting performance for your most demanding DIY projects:Product box length:5:cm.Product box height:10:cm.Product b…

Designed to work well on stone, glass, ceramics, porcelain and non-ferrous metals. Technical specificatios: Shank diameter:3.2mm. Accessory length: 40mm Maximum speed: 25,000rpm. Recommended attachment: Shaping platform attachment ref.576

Full replacement accessory set for use with D20 20V Engraver/Grinder, Stock No. 60508. Supplied inside a plastic storage case. Contents:1 x Small sanding drum holder6 x Small sanding drums1 x Large sanding drum holder6 x Large sanding drums4 x Cutting wheels4 x Polishing wheels1 x Polishing plate1 x Collet spanner with plain slot screwdriver1 x 3mm HSS drill bit1 x Polishing wheel holder1 x Diamond grinding point1 x Tungsten milling point3 x Grinding heads (cone, cylinder shape)1 x Disc holder

Various accessories for Draper Multi-Tools and other manufacturers similar machines. Display packed in storage case. Specifications Dimensions: D 6 x W 20.6 x H 35 cm Colour: Blue What's Included Grinding points Polishing wheels Cutter/milling points Grinding wheels Cutting wheels Sanding drums HSS drill bits Brush wheels #html-body [data-pb-style="60FF6AAA98F4E"]{justify-content: flex-start; display: flex; flex-direction: column; background-position: left top; background-size: cover; background-repeat: no-repeat; background-attachment: scroll; border-style: none; border-width: 1px; border-radius: 0px; margin: 0px; padding: 0px;}#html-body [data-pb-style="60FF6AAA98F5C"]{border-style: none; …

20-piece set comprising of the most popular oscillating multi-tool blades. Designed for cutting ferrous and non-ferrous metal, wood, plastic and plasterboard. There is also a scraper and blades included for removing grout and mortar. The sanding sheets are suitable for a wide range of surfaces. Universal fitting for use with Draper and other manufacturers' oscillating multi-tools.

Pack of 8 popular oscillating multi-tool blades. Designed for cutting ferrous and non-ferrous metal, wood, plastic and plasterboard. Universal fitting for use with Draper and other manufacturers' oscillating multi-tools.

Pack of 15 popular oscillating multi-tool blades. Designed for cutting ferrous and non-ferrous metal, wood, plastic and plasterboard. The sanding sheets are suitable for a wide range of surfaces. Universal fitting for use with Draper and other manufacturers' oscillating multi-tools.

Pack of eight commonly used oscillating multi-tool blades. Designed for cutting ferrous and non-ferrous metal, wood, plastic and plasterboard. With blades included for cutting ceramics, including floor and wall tiles, and removing grout and mortar. Universal fitting for use with Draper and other manufacturers' oscillating multi-tools.

Universal oscillating multi - tool accessories, suitable for use with Draper and other manufacturers oscillating multi - tools. Designed for a host of different tasks.

Universal oscillating multi - tool accessories, suitable for use with Draper and other manufacturers oscillating multi - tools. Designed for a host of different tasks.

Universal oscillating multi - tool accessories, suitable for use with Draper and other manufacturers oscillating multi - tools. Designed for a host of different tasks.

Universal oscillating multi - tool accessories, suitable for use with Draper and other manufacturers oscillating multi - tools. Designed for a host of different tasks.