Car Jacks

Unitec 10929 Scissor Jack 1000 kg
Lifting capacity up to 1000kg
Hub Height 95mm - 325mm
Crank
Execution 1,0 Tons Of

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 1 tonne x 1.5 metre

• Handles and levels heavy, off-centre loads quickly and easily.• Ball-bearing handle allows for a smooth and easy adjustment.• Three adjustment holes accommodate different sized engines.• Ideal for car, van, truck and marine engines.• If used with cranes of capacity 680kg or more, the load must be restricted to 680kg maximum.• Supplied with 4 x 275mm chains and 4 x 'L' shaped brackets with additional karabiner styled screw links.Handles and levels heavy, off-centre loads quickly and easily. Ball-bearing handle allows for a smooth and easy adjustment. Three adjustment holes accommodate different sized engines. Ideal for car, van, truck and marine engines. Suitable for use with all cranes on pa…

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 8.2mm. Size ø104mm. Fits saddle ø98-105mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 8.2mm. • Size: ø104mm. • Fits saddle ø98-105mm. • Model No. JP15Technical Specification:Nett Weight: 0.074kgJack Pad Size: ø104mmStyle: Type BProfile Depth: 8.2mmTo Fit Saddle Size: ø98-105mmWeight: 0.074kgDimensions: Length: 15mm x Height: 190mmWeight: 0.074KgWarranty: Consumable

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…

• Strong tubular frame supplied with a range of pins to fit the most common headstock sizes.• Once in place, access to all mechanical components at the front of the bike is made easy.• Stand folds down for compact storage when not in use.Strong tubular frame supplied with a range of pins to fit the most common headstock sizes. Once in place, access to all mechanical components at the front of the bike is made easy. Stand folds down for compact storage when not in use. Supplied with width and angle adjustable rubber support pads to quickly and easily use as rear support stand.• Strong tubular frame supplied with a range of pins to fit the most common headstock sizes. • Once in place, access to…

Portable Trolley Jack Kit for light domestic use. Ideal for roadside recovery. Package includes: 1020LEHV - Trolley Jack 2 Tonne Low Profile Short Chassis - Hi-Vis Green AP600JB - Trolley Jack Bag (W x D x H: 600 x 300 x 200mm) AS2000F - Axle Stands (Pair) 2 Tonne Capacity per Stand - Folding Type WCF01 - Folding Wheel Chocks - Pair S0472 - Extendable L-Bar Wrench Set 3pc 1/2"Sq Drive Features & Benefits: • Package includes: • Model No. - Description • 1020LEHV - 2 Tonne Low Profile Short Chassis Trolley Jack - Hi-Vis Green • AP600JB - Trolley Jack Bag (W x D x H: 600 x 300 x 200mm) • AS2000F - Folding Axle Stands (Pair) 2 Tonne Capacity per Stand • WCF01 - Folding Wheel Chocks - Pair • S04…

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.

The Sealey MES03 Engine Rebuild Stand for supporting large multi-cylinder engines The Sealey MES03 is a Multi-Cylinder Engine Rebuild Stand, suitable for supporting large multi-cylinder engines (maximum weight 100kg). The supports can rotate for accessibility to all parts of the engine. Both the width and length are adjustable. The engine stand's frame elongates to allow adjustment for length between mounting points. Features:   
- Width and length adjustable
- The supports can rotate for accessibility to all parts of the engine
- Suitable for supporting large multi-cylinder engines (maximum weight 100kg)
- Engine stand's frame elongates to allow adjustment for length between mounting poi…

• Suitable for use with our lever hoists or chain blocks.• Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways.• Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.• Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load…