Car Jacks

• Increases the stability of the motorcycle by clamping the bottom and front of the tyre.• Features a pivot clamp which locks the front wheel securely by the motorcycle weight.• Suitable for fitting on trailers, in vans or to motorcycle lifts (requires suitable fixings).• Fully adjustable to fit wheels ø13"-21"(380-535mm).• Minimum/Maximum Tyre Width: 50-130mm.• Please note: Motorcycle must also be secured using tie down straps.• Fittings not supplied.Increases the stability of the motorcycle by clamping the bottom and front of the tyre. Features a pivot clamp which locks the front wheel securely by the motorcycle weight. Suitable for fitting on trailers, in vans or to motorcycle lifts (require…

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 1 tonne x 4 metre

Ratchet type axle stands, with cast iron support posts. Features angled teeth in posts, which prevent accidental release of load - the more weight applied, the tighter the post is locked. Sold in pairs. Features & Benefits: • Min./Max. Working Height: 395/600mm. • Capacity: 12 Tonne per pair. • Ratchet type with cast iron support post. • Tough steel plate welded base. • Sold in pairs. • Model No. VS2006

• All steel construction with bolted height adjustment.• Ideal for long term motorcycle storage.• Sold in pairs.Technical SpecificationNett Weight: 2.04kgCapacity: 100kgMinimum Height: 325mmMaximum Height: 395mmTechnical Specification:Capacity: 100kg Minimum Height: 325mm Maximum Height: 395mmDimensions: Length: 110mm x Height: 330mmWeight: 2.4KgWarranty: 1 year

Perfect for garage use, or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the car ramps to be stood upright for convenient, space saving storage. For low ground clearance vehicles, an extension is available for purchase separately (part number: RM1). Specifications: • Capacity per Pair: 2000kg • Length: 790mm • Car Ramp Height: 250mm • …

Jabra 8800-01-46 headphone/headset accessory Cable

• Two rubber wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.Two rubber wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for vehicles below 5 tonne.• Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Suitable for vehicles below 5tonne. • Model No. WC02Technical Specification:Applications: Suitable for vehicles below 5tonneDimensions (W x D x H): 115 x 270 x 175mmMaterial: RubberNett Weight: 6.13kgWeight Each: 3.3kgDimensions: Length: 215mm x Heig…

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 15mm. Size ø94.5mm. Fits saddle ø95mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 15mm. • Size: ø94.5mm. • Fits saddle ø95mm. • Model No. JP13Technical Specification:Nett Weight: 0.09kgJack Pad Size: ø94.5mmStyle: Type CProfile Depth: 15mmTo Fit Saddle Size: ø95mmWeight: 0.17kgDimensions: Length: 15mm x Height: 190mmWeight: 0.1KgWarranty: Consumable

For repairs and maintenance. Suitable for most standard cars. Platform height 200mm; platform width 205mm approx. Extensions are available to lower the angle for low ground clearance vehicles Stock No 23306. Sold loose.

• Interlocking plastic dollies can be linked lengthways or sideways to allow the user to create the platform they need to move large or heavy items around the workplace with ease.• Each dolly can hold up to 150kg of evenly spread weight.• Injection mould plastic features non-slip pads which prevent load from slipping.• The design of the dolly also allows for these to be stacked safely on top of each other (maximum ten high) when not in use.• They also feature built-in carry handles to aid transportation and 75mm TPR double ball-bearing castors for manoeuvrability.• Overall Size (W x D x H): 605 x 400 x 120mm.Interlocking plastic dollies can be linked lengthways or sideways to allow the user to …