Effects Pedals

The Palmer Two in One Amp Selector is a robust and extremely useful box which allows you to seamless connect and switch between two amplifiers to achieve your perfect amp tones. Often a lot of profess more→ional guitarists will require two very different sounds achieved only by specific amps so which the Palmer TINO you can connect and switch between two separate amps or connect both amplifiers through the TINO and send the switchable signal to a single guitar cabinet.

The Palmer PW9V is a standard 9 volt power supply which can be used to power a range of electric guitar and bass effects pedals. With a maximum power consumption of 500 mA and lengthy cable of 1.50 me more→tres the PW9V is the perfect addition to your set up as it allows you to save money on 9 volt batteries.

Portable guitar preamp. Delivers an extended range of authentic tube amplifier tones from high headroom ultra clean to maxed out high gain distortion. With 3-position selector switches for amplifier d more→esign, gain structure and loudspeaker miking simulation the MK 2's hot rodded circuitry lets you easily configure vintage and modern sounds as well as your own while high performance op amps provide superior S/N ratio. Offers balanced XLR and unbalanced 6.35 mm outputs in addition to 3.5 mm AUX input and headphones jacks. Controls include mic position, mode, Treble, amp select, Bass, Drive, Gain, ground lift, level. Robust steel housing. Powered by 9 V DC power supply (not included) or 9 V block.…

Universal pedalboard made from aluminium, for the storage of all commercially available floor effects. The cross bars (covered with Velcro), height and the tilt of the Pedalboard can be individually a more→djusted. Power supplies can be mounted below the board. Dimensions: 800 x 390 x 70-85 mm. Weight Pedalbay: 6.88 kg. Accessories (included): 2x black elastic bands, approx. 5 m hook tape, soft carrying case with shoulder strap, allen key.
Original Colour by Producer: Black;Black
Made in: Germany
Type: Pedalboard
Colour: Black

The Palmer Pedalbay 80 Bag is a reliable and hard wearing replacement softcase for Pedalbay 80 pedalboards. The softcase is constructed from 600D Oxford Nylon which offers superior strength and abrasi more→on resistance compared to its Polyester counterparts. An in-built accessory pouch provides extra capacity for cables power supplies and extra pedals. Finally a reliable shoulder strap is also included for easy transportation.

Universal pedalboard made from aluminium, for the storage of all commercially available floor effects. The cross bars (covered with Velcro), height and the tilt of the Pedalboard can be individually a more→djusted. Power supplies can be mounted below the board. Dimensions: 600 x 390 x 70-85 mm. Weight Pedalbay: 5,15 kg. Accessories (included): 2x black elastic bands, approx. 3,5 m hook tape, soft carrying case with shoulder strap, allen key.
Colour: Black
Original Colour by Producer: Black;Black
Made in: Germany
Type: Pedalboard

Universal pedalboard made from aluminium, for the storage of all commercially available floor effects. The cross bars (covered with Velcro), height and the tilt of the Pedalboard can be individually a more→djusted. Power supplies can be mounted below the board. Dimensions: 605 x 305 x 70-85 mm. Weight Pedalbay: 4,62 kg. Accessories (included): 2x black elastic bands, approx. 3m hook tape, soft carrying case with shoulder strap, allen key.
Type: Pedalboard
Original Colour by Producer: Black;Black
Colour: Black
Made in: Germany

Soft carrying case with shoulder strap, padded. Dimensions: 600 x 390 x 85 mm. In a black finish.
Original Colour by Producer: Black;Black
Type: Pedal Bag
Colour: Black
Padding more→: Yes
Made in: Germany

Soft carrying case with shoulder strap, padded. Dimensions: 605 x 305 x 85 mm. In a black finish.
Original Colour by Producer: Black;Black
Made in: Germany
Type: Pedal Bag
Padd more→ing: Yes
Colour: Black

Universal pedalboard made from aluminium, for the storage of all commercially available floor effects. The cross bars (covered with Velcro), height and the tilt of the Pedalboard can be individually a more→djusted. Power supplies can be mounted below the board. Dimensions: 500 x 135 x 35 mm. Weight Pedalbay: 2,46 kg. Accessories (included): 2x black elastic bands, approx. 1.5m hook tape, soft carrying case with shoulder strap.
Type: Pedalboard
Made in: Germany
Original Colour by Producer: Black;Black
Colour: Black

Universal pedalboard made from aluminium, for the storage of all commercially available floor effects. The cross bars (covered with Velcro), height and the tilt of the Pedalboard can be individually a more→djusted. Power supplies can be mounted below the board. Dimensions: 450x 305x 70-85mm. Weight Pedalbay: 3.8 kg. Accessories (included): 2x black elastic bands, approx. 2.5m hook tape, soft carrying case with shoulder strap, allen key.
Colour: Black
Original Colour by Producer: Black;Black
Made in: Germany
Type: Pedalboard

The Palmer Pedalbay 40 Bag is a reliable and hard wearing replacement softcase for Pedalbay 40 pedal boards. The softcase is constructed from 600D Oxford Nylon which offers superior strength and abras more→ion resistance compared to its Polyester counterparts. An in-built accessory pouch provides extra capacity for power supplies and cables. Finally a reliable shoulder strap is included as standard for easy transportation.

Portable bass preamp. Multi-purpose effects pedal and preamp for active and passive bass guitars, that's perfect for gigging, recording and practising. It features clean, overdrive and fuzz modes with more→adjustable drive and saturation, a 3-band EQ with semi-parametric mid control that is specifically tuned for bass guitar and vintage or modern cabinet simulation. A blend control allows you to mix the direct and effected signals. Controls include Bass, Drive, ground lift, highs, input pad, Mid, mid frequency, mode, mute, Pre/Post, volume. Robust steel housing. Powered by 9 V DC power supply (not included) or 9 V block. Dimensions: 100 x 100 x 55 mm. Weight: 0,36 kg. In a black finish.
Made in: …

Providing extensive sound shaping options for acoustic guitars and basses, the Acoustic Pocket Amp is a versatile preamp that‘s perfect for gigging, recording and practising. It accomodates both more→piezo and magnetic pickups, and the 3-band EQ with semi-parametric mid control is specifically tuned for acoustic instruments. The Pocket Preamp features an input limiter to prevent transient distortion while a 5-position rotary notch filter eliminates resonant frequency feedback. A mode switch selects between crisp contemporary or warm vintage sound characteristics, and a blend control allows you to mix the direct and processed signals.The Acoustic Pocket Amp provides an insert for external effects,…

The Palmer Hook and Loop Fastener is a 1 metre strip of self-adhesive tape which is perfect for mounting devices on pedal boards.

Summing Amp

Passive Cabinet Merger. The concept behind Palmer's Cab Merger may be very simple, but the unit fills an important gap! Have you ever wanted to connect two guitar cabinets to just one amplifier output more→? It's quite simple with the PCABM! In addition, you can choose parallel or series wiring. For instance, two 8 ohm cabinets can be connected for a total load of 4 ohms (parallel) or 16 ohms (in series). The device is entirely passive and does not affect tone in any way. Dimensions: 105 x 35 x 35 mm, weight: 0,13 kg
Type: DI Box
Made in: Germany
UK/EU Power supply included: No