Car Jacks

The Sealey cross beam adaptor is ideal for use with front wheel drive vehicles and is suitable to be used with jacks with a 31 - 33mm saddle spigot pin. This cross beam also provides extra when locating awkward jacking points and the robust manufacture makes this an ideal tool for any workshop or garage.

Type:Rubber Pad Material:Rubber Features:Durable, Cross Slotted, Car Accessories Size:12.5 x 2.5cm/4.92" x 0.98" (Approx.) Groove Size:1cm x 0.8cm/0.39" x 0.31" (Approx.) Description: Brand New & High quality. This universal rubber pad is used to protect the undercarriage metal jack point railing that is on most vehicles.Durable and resistant to damage, it will keep the chassis rails from getting pinched, bent and broken.Soft enough to not harm your vehicles metal yet rigid enough to support it.Great for DIY vehicle maintenance.Fits most floor jacks and lifts. Pls Note: 1.Please allow 0.1-0.3cm differences due to manual measurement, thanks. 2.As shown, all products are made under natural

Quickly and safely overcomes the awkward job of lifting 4x4 vehicles with offset differentials. Simply remove the existing trolley jack saddle, replace with cross beam adaptor, fit the jack saddle into the hole in the adaptor* (30mm max spigot pin) and you are ready to lift. Suitable for jacks with a 30mm saddle spigot pin. *Note: Remove any rubber jack pad from the saddle before using to improve safety.

Heavy duty Car Hydraulic Bottle Jack Lifting Stand Capacity: 2 T Car Jack Stand Lifting 158 to 308 mm Car Lift Jack Supplied in Protective Rubber Pad Excellent handling and stability for all vehicles Lift Stand For Emergency and Vehicle Repairs Heavy Duty Lifting Tool for all vehicles Quality vehicle lifting equipment Brand: alca Germany

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

GREY support trestles, 1 pair, max. load 14 t, 4+ pairs. Supplied = assembled. Max. load = 14 t. Lifting range with lifting head = 242 - 400 mm. Lift = 158 mm. Weight = 13 kg. Weight per item = 6.5 kg. Product type = uprights. For supporting vehicles or heavy machinery. Robust design with wide and stable contact surface. Safe and easy handling. Perfectly suited for supporting and securing heavy loads. High quality workmanship with a long service life.

Floor Jack Rubber Pad Universal Description: Material: Rubber Color: Black Size: 12.7CM/ 5.0'' inches(Diameter) Thickness: 2.5CM/ 1'' inch Product Features: 1. Made of high durable rubber and cross slotted design will provide more cushion and crush resistance. 2. Great for DIY vehicle maintenance or taking one with you in the car as some tire shops do not use these pads, and unfortunately bend your pinch/scrape off paint on the welds. This can eventually lead to rust, save yourself the hassle with this simple product. 3. 4 ton max load bearing, fits most Jacks and vehicles, please verify dimensions and ensure fitment to your vehicle. 4. Highly durable and resistant to damage, it will

Note: Image is for illustrative purposes only and may differ from the actual product

VEVOR Floor Jack, 3 Ton Low Profile Floor Jack, Heavy-duty Steel Racing Floor Jack With Single Piston Quick Lift Pump, Floor Jack Lifting Range 130 mm-508 mmPowerful CapacityBuilt to LastEasy to OperateNo More Damage to VehiclesReliable SealingSmooth-RollingTwo-section HandleHandle Length: 45 in/1145 mm,Product Size (L x W x H): 25.8x12.8x6.7 (inch)/656x325x170 (mm),Lift Weight Capacity: 6600 LBS/3 Tons,Model: S508,Product Weight: 32.3 kg/71.2 lb,Load Bearing Method: Hydraulic Single Pump,Maximum Height: 20"/508 mm,Material: Steel,Tray Diameter: Φ 4.3 in/110 mm,Minimum Height: 5.12"/130 mm

Technical Specifications: Style: solid style Material: Rubber Shape: Round Color: Black Diameter: 122mm (4.8") Thickness: 16mm (0.63") Mounting holes Dia.: 11mm (7/16") Back hole diameter: 5mm (0.2") Features and Benefits ● Soft rubber surface, do not scratch painted ● Prevent your frame rails from bending when using a lift to lift your car. ● This is a set of 4 HEAVY DUTY Round Solid shaped lift pads. ● These were found on many different brand lifts. ● These are very thick and very durable. They measure 1" thick, able to hold up to sharp sub-frames and pinch weld lifting points. ● These molded pads measure 4.8" in diameter x 0.63" thick and have a 7/16" hole in the center for mounting to …

Robust: The cartrend trolley jack SUV 2t is made of robust and stable materials, which is why it is ideal for off-road vehicles height adjustable: the cartrend trolley jack SUV 2t can be raised to a maximum lifting height of 530 mm thanks to the included height adapter. This is done easily and quickly via the included adaptor Heavy: the cartrend trolley jack SUV 2t is also suitable for SUVs and off-road vehicles thanks to the high load capacity of up to 2 t. This is completely enough for most SUVs and off-road vehicles International products have separate terms, are sold from abroad and may differ from local products, including fit, age ratings, and language of product, labelling or instructions.…

Bottle jack, with hydraulic unit, max. load 3 t. Supplied = assembled. Max. load = 3 t. Lifting range with lifting head = 168 - 318 mm. Lift = 100 mm. Weight = 2.3 kg. Overall height from - to = 168 - 318 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle accessory.

Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle.2 Tonne Bottle Jack• Min./Max. Height: 168/316mm.• Fitted with overload valve.• Base and reservoir machine welded. • Supplied with 2-piece handle.• 3 Year guarantee*.• Model No. PBJ2SModel No: PBJ2S:Brand: Viking:Capacity: 2 Tonne:Hydraulic Lift: 100mm:Maximum Height: 316mm:Minimum Height: 168mm:Nett Weight: 2.2kg:Screw Extension: 48mm:PTDSEAPBJ2S

Trolley Jack / Max Load 2 t