Car Jacks

Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams. When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge. In position, and when the beam is under load, the bearings retract, to leave the flat of the arm, to stabilise the lift.Features & Benefits:• Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams.• When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge.• In position, and when the beam is under load, the bearings retract to leave the flat of the arm to stabilise the lift.• Model No. SJBEX.A01Speci…

• Fitted with safety overload valve and manufactured in the EU.• All steel, one-piece base, reservoir and pump cylinder design gives added strength.• Telescopic pump handle for easy storage.• 90° Rotating pump.• Moulded carry handles incorporating storage for the pump handle.• Fully serviceable ram piston with extension screw.• Service kit readily available.Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. All models supplied with 90° rotating pump and telescopic pump handle. Fitted with moulded carry handle incorporating storage for the pump h…

Expert Quality, polyester webbing, 50mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 1000kg for a load at one end (straight configuration) and 2000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Fitted with overload valve. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 2-piece handle.• 3 Year guarantee*.Technical SpecificationCapacity: 12 TonneHydraulic Lift: 150mmMaximum Height: 441mmMinimum Height: 231mmNett Weight: 6.4kgScrew Extension: 60mmTechnical Specification:Capacity: 12 Tonne Hydraulic Lift: 150mm Maximum Height: 441mm Minimum Height: 231mmDimensions: Length: 140mm x Height: 240mmWeight: 6.6KgWarranty: 3 years

• Replacement hydraulic ram for SC10.V3 engine crane.Replacement hydraulic ram for SC10.V3 engine crane.• Replacement hydraulic ram for SC10.V3 engine crane. • Model No. SC10.V3-ETechnical Specification:Nett Weight: 9.6kgRam Capacity: 3000kgRam Diameter: 27.88mmRam Travel: 515mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.5mmMounting Point Distance (Min.): 635mmOverall Length (Min.): 670mmBase Mount Type: Double ClevisWeight: 9.612KgWarranty: Consumable

Faithfull Lifting Slings are made from 100% PES polyester duplex webbing that is lightweight but extremely durable for use on awkward loads, offering a soft alternative to wires and chains. All sizes can be used in straight pull, basket or choke configurations. Fitted with a reinforced, sleeved lifting eye. Meets the requirements of EN 1492 Part 1:2000. Minimum breaking load is 7 times the Working Load Limit.The Faithfull Green Lifting Sling has the following specifications: Max. Load: 2 Tonne.Width: 60mm.Length: 2m.Additional Information:• Length: 2.0m• Type: Lifting Sling• Load Capacity: 2000kg• Breaking Strength: 14000kg

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 2 tonne x 4 metre

Heavy-duty axle stands to safely support vehicles for extended periods of time. Large crutch for even load distribution. Heavy gauge steel frame and base plate with welded construction gives superior strength and safety. Supplied with captive, multi-position pin load support. Sold in pairs. Features & Benefits: • Min./Max. Working Height: 332/485mm. • Capacity: 40 Tonne per pair. • Heavy-duty high lift axle stands. • Sturdy welded steel construction. • Captive pin load support. • Ideal for use with 20tonne air jacks. • Sold in pairs. • 3 Year Guarantee*. • Model No. AS20 Specifications: Model No AS20 Brand: Premier Capacity Each: 20 Tonne Capacity Pair: 40 Tonne Maximum Working Height: 485mm Mini…

• This engine stand accepts a wide variety of engines and transmissions.• The head swivels 360º for accessibility to all parts of the engine.• Fully adjustable mounting arms.• Swivel castors provide excellent manoeuvrability.• Maximum Load Length: 700mm.Accepts a wide variety of engines and transmissions. The heads swivel 360° for accessibility to all parts of the engine. Fully adjustable mounting arms. Swivel castors provide excellent manoeuvrability. Maximum Load Length: 700mm.• Accepts wide variety of engines and transmissions. • Head swivels through 360°. • Swivel castors. • Fully adjustable mounting arms. • Model No. ES450Technical Specification:Capacity: 450kgNett Weight: 19.…

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Height 6.5mm. Size ø94mm. Fits saddle ø93-96mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Height: 6.5mm. • Size: ø94mm. • Fits saddle ø93-96mm. • Model No. JP17Technical Specification:Nett Weight: 0.050kgJack Pad Size: ø94mmStyle: Type BProfile Depth: 6.5mmTo Fit Saddle Size: ø93-96mmWeight: 0.050kgDimensions: Length: 20mm x Height: 165mmWeight: 0.052KgWarranty: Consumable