Car Jacks

Fitted with overload valve. Dual-stage rams allow for longer travel. Lower retracted and higher extended heights. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 3-piece handle. Features & Benefits: • Fitted with overload valve. • Dual-stage rams allow for longer travel. • Stage 1 capacity 7500kg. • Stage 2 capacity 4000kg. • Lower retracted and higher extended heights. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 3-piece handle. • Model No. SJ4T Specifications: Model No SJT4 Brand: Sealey Capacity: 4 Tonne Hydraulic Lift: 170mm Maximum Height: 390mm Minimum Height: 160mm Nett Weight: 6.4…

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Expert Quality, for semi-permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Contents: 1 x Beam Clamp, 1 Tonne Specifications: Depth (Beam Clamp): 64mm Girder Beam Width: 75-260mm Overall Width (Beam Clamp): 180-360mm Safe Working Load (SWL): 1 tonne Steel Plate Thickness: 5mm

This trolley jack features an extra-fast single lifting pump to ensure it reaches full height in just 2.5 strokes. It has a low profile design making it ideal for vehicles with a reduced clearance height, enabling a lifting range from 78-510mm. There is an integrated rubber saddle pad to prevent damage to the underside of the vehicle when in operation. Fitted with hardwearing nylon wheels with rear swiveling castors, for quiet and smooth operation. These wheels also prevent damage to garage floors. There is a safety valve to prevent the jack from overloading. Manufactured to EN1494 SpecificationContents:1 x Draper Expert Professional Low Profile Fast Lift Garage Trolley Jack, 3 Tonne, BlackSpecifications:Capacity: …

Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beams supported on rubber feet and fine adjustment control is obtained by using screw/hook mechanisms. This model has the additional advantage of a 360 adjustable rotating cross beam to enable a greater range of support options when in use.

Expert Quality, ideal for the workshop or factory use. The lever chain hoist has a totally enclosed pinion gear mechanism and load braking with double pawls. The free chain feature allows slack in the chain to be taken up prior to ratcheting. High quality welded chain with safety latches on the load hooks.Additional Information:Safe Working Load: 3000kgTest Load: 4500kgLift Height: 1.5mHook Aperture: 46mmHoist Weight: 19kg

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 22.7mm. Size 122.7mm. Fits saddle 122-126mm.

Single-piece hydraulic unit with heavy base design. Integral cog-type release mechanism and long 2-piece handle. Protective jack handle sleeve helps prevent accidental damage to car bodywork when pumping the handle. Heavy-duty castors and extra-large saddle design ease positioning under vehicle. Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension. Ideal for loaded vans up to 3.5 Tonne GVW. Features & Benefits: • Min./Max. Saddle Height: 130/520mm. • Chassis Length: 659mm. • Integral cog-type release mechanism and long 2-piece handle. • Heavy-duty swivel castors and extra-large saddle design ease positioning under vehicle. • Fitted with safet…

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 1 metre

Replacement hydraulic ram for SC10LR.V2 engine crane. Features & Benefits: • Replacement hydraulic ram for SC10LR.V2 engine crane. • Model No. SC10LR.V2-23 Specifications: Model No SC10LR.V2-23 Brand: Sealey Nett Weight: 13kg Ram Capacity: 7257kg Ram Diameter: 33.93mm Ram Travel: 495mm Pump Type: Single Speed Ram Pin Hole Diameter: 16.5mm Clevis Pin Hole Diameter: 16.7mm Mounting Point Distance (Min): 620mm Overall Length (Min): 655mm Base Mount Type: Double Clevis