Car Jacks

Rubber Pad for trolley jack and lifting stage Easy to use and fits most of the trolley jacks and vehicle lifts (e.g. Unitec, Michelin). Non-slip protected by V Groove and waffle pattern. The scoop on the bottom of the rubber buffer ensures a steady hold on the Car Jack Plate. Diameter: 38/65 mm, robust material. Good quality The item was recommended as a bundle, but does not fit the stand ordered. - The jacking rubber pad is perfectly suitable for various body types and jacks (e.g. cartrend, UNITEC, MICHELIN, GOODYEAR etc)

Info Governance Engine Up To 10 Devices

Ideal for workshop or roadside use, this jack takes the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead man’s handle which also aids controlled lowering speed. Supplied with extensions that close the gap between the saddle of the jack and the jacking point. See chart for detailed specification.

Rubber Jack Pad for Trolley Scissor Jack Fits BMW, Mini, Mercedes, Vauxhall some cars Rubber Pad designed for BMW, Mini, Mercedes, Vauxhall models Size:65 x 44 Sill Pad Protector Made of high quality rubber, will not damage the vehicle. Suitable for most floor jacks and lifts This is a high-quality HEYNER German product

Type : Felt Pad Place of Origin: CN (Origin) shape: rectangle Material: PVC Color: red Single set of product packaging: Kraft paper box Single set of product packaging size: 35*10*9.5cm Weight: 666g Model: furniture handling tool

Zinc Plated Side Winding Parking/Lifting Jack with Round Fixing Tube supplied with Inner Tube for welding. Height Retracted 530mm, Height Extended 905mm, Box Size 60mm, Square Base Diameter 200mm, Load Capacity 3000kg

The JCB-TH32506S is a robust, low-profile and double-pump hydraulic off-road SUV trolley jack designed to offer a maximum lifting capacity of up to 2.5 tonnes in weight.Courtesy of its aluminium construction, the JCB-TH32506S is capable of lifting SUVs, cars, light commercial vehicles and any other vehicle which requires high ground clearance up to 525mm in height in all conditions.In addition to its default 525mm maximum height clearance, the JCB-TH32506S comes equipped with 2x saddle extensions, which can increase the trolley jack’s maximum ground clearance up to 677mm.The JCB-TH32506S’ chassis utilises a low-profile design, which allows the trolley jack to reach lower clearances, particularly usef…

Heavy-duty, industrial quality, dual purpose toe lift bottle jack. Has a lifting capacity of 10tonne on the toe of the jack and 14tonne on the head. Designed to lift heavy plant or machinery where there is limited ground clearance such as fork lift trucks, machine installation or for use on construction sites. Fitted with a 280 rotating handle to enable jacking in confined spaces.

The Sealey cross beam adaptor is ideal for use with front wheel drive vehicles and is suitable to be used with jacks with a 31 - 33mm saddle spigot pin. This cross beam also provides extra when locating awkward jacking points and the robust manufacture makes this an ideal tool for any workshop or garage.

Made primarily for the motor racing enthusiast this jack weighs in at just 17.6kg. Utilises many weight saving techniques such as a skeletal lift arm. Features Rocket Lift by use of twin pistons bringing saddle to maximum height in minimal pumps. Polyurethane wheels for smooth and quiet manoeuvring which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast lightweight pick-up.1.8 Tonne Aluminium Low Profile Trolley Jack with Rocket Lift• Min./Max. Saddle Height: 85/425mm allowing low entry.• Chassis Length: 637mm.• Made primarily for the motor racing enthusiast this jack weighs in at just 17.6kg.• Utilises many

Bottle jack, with hydraulic unit, max. load 5 t. Supplied = assembled. Max. load = 5 t. Lifting range with lifting head = 195 - 380 mm. Lift = 125 mm. Weight = 3.3 kg. Overall height from - to = 195 - 380 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle accessory.

Replacement Rear Castor to Suit ZT1120454X (Sgl) by Kennedy

This professional quality bottle jack has: Capacity (Tonnes): 5 Jack Height (Min-Max): 185-355mm Weight: 4.08kg tough cast iron base with screw in components High quality polished steel ram with additional screw in/out height adjuster Three piece pumping handle Automatic overload protection

VEVOR Pneumatic Jacks,6600 lbs(3.0Ton) Pneumatic Car Jack with Portable Handle,triple bag jack Thickened Rubber for soft and easy to collapse terrain, water on sand or muddy roads6600lbs Loading Capacity5.3"-15.75" Lifting RangeSolid ConstructionEasy OperationEasy to StoreWide ApplicationMin. Height: 135 mm / 5.3 inches,Lifting Time: 5 Sec,Max. Height: 400 mm / 15.75 inches,Gross Weight: 43 lb/19.5 kg,Capacity: 3.0 tons / 6600 lbs,Air Inlet: G1/4,Color: Red,Model: Red Triple Bag Jack,Material: Steel + Rubber,Working Temp: -60℃~ 50℃