Effects Pedals

Universal pedalboard made from aluminium, for the storage of all commercially available floor effects. The cross bars (covered with Velcro), height and the tilt of the Pedalboard can be individually adjusted. Power supplies can be mounted below the board. Dimensions: 600 x 390 x 70-85 mm. Weight Pedalbay: 5,15 kg. Accessories (included): 2x black elastic bands, approx. 3,5 m hook tape, soft carrying case with shoulder strap, allen key.
Made in: Germany
Original Colour by Producer: Black;Black
Colour: Black
Type: Pedalboard

Distortion / Pedal Design Foot Pedal / Effects Distortion

Distortion effect pedal for electric guitar that is 100% analog and conjures up vintage hard clipping that is raw and highly responsive to the attack. It delivers a big, powerful ‘80s arena-rock tone, punchy sustain and rich distortion, and provides dedicated Output, Tone and Distortion controls for sound shaping. Pedal uses low-noise op amps and MXR quality components, and has true bypass switch.
Made in: USA
UK/EU Power supply included: No
Variant: Standard
Number of Buttons: 1
Colour: Orange
True Bypass: Yes
Controls: Output;Tone;Distortion
Outputs: Jack 6,3 mm TS
Inputs: Jack 6,3 mm TS
Package Contents: Manual
Power Supply: 9V DC ( - );Adapter or Battery
Battery Operation: Yes
Battery Ty…

Amp Modeler / Pedal Design Foot Pedal / Operation digital / Effects Amp-Modeling

Headphone amplifier for pedalboards. The new Mooer Audiofile is a professional headphone amplifier, specifically designed for use with guitar and bass pedalboards. It utilizes an analog Class A amplification circuit that secures the purity, warmth and wide dynamic range of the input signal from your instrument and effects pedals. The Audiofile can be used with either headphones (with mono or stereo input) or in front of your amp as a hi-fi signal booster. Its 100% true bypass and pristine sound will make it become a permanent resident on your pedalboard. Analog Class A amplification circuit, specifically designed for use with guitar and bass pedalboards, can also be used as high-fidelity booster,…

The Mooer D7 Delay is the redesigned multi-delay and looper effects pedal from the updated Micro Series. Using the 7 signature LED lights as a guide, this pedal features 6 customizable digital delay effects (Tape, Liquid, Rainbow, Galaxy, Mod-Verse, Low-Bit) with the seventh LED indicating the built-in looper that can be used in tandem with any delay setting. The built-in looper has a maximum recording capacity of 150 seconds and comes with an integrated delay effect. Like the other pedals in the series, all of these effects are customizable and storable for your convenience. Tap Tempo functionality allows you to easily set the desired delay timing and of course, with the 'Trail On' feature …

Overdrive

HyperGravity Mini Compressor is the missing ingredient that will take your tone from good to great. Featuring endless compression options via our proprietary TonePrint technology, HyperGravity Mini is the key to getting that coveted, professional, even tone from an impossibly small stompbox. From state-of-the-art multiband compression, to cool vintage compression, HyperGravity Mini delivers it all in spades. Kick it in and prepare to shine! HyperGravity Mini's highly advanced multiband dynamics algorithm is the same MD3 compression algorithm that can be found in our studio production masterpiece, System 6000, the preferred dynamics tool for top producers for over 10 years. But if old-school …

Expression Pedal

Pedal Design Foot Pedal

Ace of Tone Dual Stacked Overdrive PedalAce of Tone is a dual stacked overdrive pedal, combining the Morning Star and Tubeman circuits into a single unit with independent controls and foot switches. Each overdrive has its own character, with the Tubeman based on a classic overdrive circuit with a mid-focussed tone and the Morning Star having a more transparent natural sounding overdrive. Either drive section can be switched in independently or combined with 2 options for Tubeman stacked into Morning Star or Morning Star stacked into Tubeman. A switch on the rear panel selects buffered or true bypass and another can enable a voltage multiplier circuit to deliver 18V for increased dynamic range.…

High-impedance volume pedal that is designed to be connected before guitar effect units in the signal chain, providing two inputs and two outputs. Convenient tuner output enables speedy tuning on stage, while the Minimum Volume knob allows user to set minimum volume as desired. Dimensions: 86 x 200 x 54 mm. Weight: 400 g.
Made in: China
Battery Operation: No
Power Supply: Passive
Type: Volume
UK/EU Power supply included: No

Chorus

The Hammertone™ Reverb delivers three classic reverb effects – Hall, Room and Mod – in a compact stomp that will integrate seamlessly into your rig. Powerful damping control and tone switch offer supreme flexibility, while the Fender-designed on-board reverb tones are perfect for subtle to extreme ambience.
Battery Detail: Al/Mn
True Bypass: Yes
Controls: Time;Level;Damping
Power Supply: Adapter
UK/EU Power supply included: No
Number of Buttons: 1
Inputs: Jack 6,3 mm TS
Outputs: Jack 6,3 mm TS
Battery Operation: No
Package Contents: Manual
Tuner: No
Series: Hammertone
Type: Reverb
Colour: Grey
Made in: China
Switch: Yes…

Fender’s Tone Master® Pro Gig Bag is a stylish and affordable way to keep your Tone Master Pro safe while traveling. Its durable outer layer is constructed of tough 600 Denier polyester that protects against impacts while avoiding ripping and tearing. The interior features 10mm padded rigid foam with two dividers to accommodate expression pedals or other gear. Dual storage pockets in the lid make hauling around small items like cables and accessories a breeze. The Tone Master® Pro Gig Bag also includes a shoulder strap for easy transportation.
Weight: 2,35 kg
Padding: 10 mm
Type: Pedal Bag
Depth (cm): 31.75
Width (cm): 14.5
Material: 600D Polyester
Height (cm): 69.3
Colour: Black
Compatible with…

Modelling guitar effect processor pedal from StompLab series with 103 modelled amps and effects, that provides high-quality sound and look. It offers a total of 100 preset program patches that are categorized by style (rock, blues, ballad, pop, metal…), and easy-to-use interface that provides instant access to the sounds that are wanted. Each effect model boasts a sound engine that has been distilled from the VT+ series of modelling amps and ToneLab series of multi-effect units, and up to 8 of them can be used simultaneously. Processor allows for editing and saving 20 of user programs. Device is also equipped with built-in tuner and headphone amp, 1/4" analog input and output. Pedal can be po…

The Tone Capture GTR pedal is based on Mooer’s unique EQ matching, non-linear IR technology, 'Tone Capture'. This pedal allows you to capture any guitar’s tone by sampling the unique tonal characteristics of the target guitar. This is achieved by comparing the differences between the guitar you want to use ('Source') and the guitar you want it to sound like ('Target'). A complex calculation then ensues and an uncanny digital recreation of your 'Target' guitar tone is born. The days of lugging around multiple guitars are over. The Tone Capture Guitar pedal opens up a variety of guitar sounds without the need to carry several guitars.
metal housing
6.3 mm mono in / output jacks
power …

wireless footswitch for Mooer GTRS guitars
changes presets and tone settings while playing
tap tempo control for selected presets with delay effect
built-in tuner function for GTRS guitar
2.4 GHz ISM band for worldwide use
built-in rechargeable lithium-ion battery (720 mAh)
4 footswitches
Power On/Off switch
1x USB Type-C socket
dimensions (L x W x H): 224 x 40 x 38 mm
weight: 220 g
incl. USB-A to USB-C charging cable
Battery Operation: Yes
UK/EU Power supply included: No
Number of Buttons: 4
Compatible with: MOOER
Made in: China
Package Contents: USB Cable;Manual
Power Supply: Adapter or Battery
Type: Footswitch
Battery Type: Li-Ion
Colour: Black…

Overdrive