Effects Pedals

Afterglow Chorus is designed with the vintage aficionado in mind. Its all-analog circuit uses a Bucket Brigade Device (BBD) to create a wide range of classic handed-down modulation tones. From the smallest shudder to wildest wobble, this tiny marvel is sure to quench your thirst for vintage flavored chorus! From rotary speaker vibes to a full-blown 1980s chorus symphony, from jangle pop to grunge - Afterglow Chorus does it all. Plug in and send your tone on a journey through rock n' roll history! Many guitarists have grown to love the distinct tone of Bucket-Brigade circuits. And with good reason! The natural bandlimiting of this analog component is the secret-sauce found in countless classic …

3rd Dimension Chorus is a unique type of "motionless" chorus effect that reproduces that instantly recognizable '80s clean tone. It's full and lush, and expands your tonal range with a 3-dimensional feeling that is at once rich and sweet, as well as shallow and smooth. The pedal has no knobs to fiddle with - just 4 preset buttons ranging from "just a bit" to "quite substantial". Trust us - you're gonna love all of them! This pedal takes its inspiration from the classic '80s analog studio chorus guitar tones found on thousands of recordings - thick, lush, and crystal clear. It even responds to your playing dynamics - either dig in on some meaty chords, funk out on some crispy double-stops, or …

The Strymon Zuma Mounting Kit is the perfect solution for affixing your power supply in a discreet manner. It keeps your Zuma high current PSU stored underneath your PedalTrain board leaving more space for creative pedals up top! Please note: The Zuma Mounting Kit is not compatible with older model Pedaltrain boards (PT-1 PT-2 PT-JR) with holes on the rear brace instead of an open pass through for the length of the board. For those boards we recommend affixing Zuma to your board with Dual-Lock®.

9V/660mA power adapter with negative centre that has been primarily designed for Strymon effect pedals.
Plug Type: Barrel
UK/EU Power supply included: No
Current (mA): 700.0
Power Supply: 240V
Current: 501-700 mA
Polarity: Center Minus
Number of Outputs: 1
Voltage: 9V
ChargerType: AC adapter
Made in: China

Rugged, medium-weight plastic moulded ABS case for guitar effect pedals that features a strong, extruded aluminium edging, chrome hardware and high density foam padded interior for extra protection. It also has rubber feet for vertical positioning and a moulded handle for easy transportation. Pedals are attachable to the case's interior via a Velcro strip (included). Internal dimensions: 688 x 296 x 83 mm.
Type: ABS Case
Padding: Yes
Feet: Yes
Colour: Black
Material: ABS
Zip: Yes
Made in: China
Original Colour by Producer: Black;Black

Rugged medium-weight case for guitar effect pedals made of moulded ABS plastic with strong extruded aluminium edging and chrome hardware. High-density foam padded interior and included Velcro strip attachment provide extra protection of each pedal. Rubber feet increase stability of vertical positioning, and moulded handle makes transportation easy and comfortable. Internal dimensions: 320 x 535 x 83 mm. Black and chrome colour combination.
Feet: Yes
Colour: Black
Made in: China
Original Colour by Producer: Black;Black
Type: Pedal Case

Rugged hard-shell medium-weight case for guitar effect pedals made of durable moulded ABS plastic with strong, extruded aluminium edging. It features a high density foam padded interior for extra protection, chrome hardware, rubber feet for improved stability of vertical positioning, and a moulded handle. Pedals can be attached to the interior via a Velcro strip (included). Internal dimensions: 255 x 500 x 90 mm.
Made in: China
Material: ABS
Original Colour by Producer: Black;Black
Colour: Black
Type: Pedal Case

This well-built, real-feel pedal comes with a non-slip rubber plate — essential when performing on hardwood or slip-prone surfaces — and an extended cable (2.2 m) for stacked multi-keyboard setups. It is compatible with half-damper capable keyboards, and it can also serve as a standard pedal switch (for sustain, etc).
Original Colour by Producer: Black;Black
Type-A Connector: TRS 6,3 mm Jack
Type: Half Damper;Sustain Pedal
Made in: Malaysia
Compatible with: Universal
Colour: Black
Cable Length: 2,2 m
Polarity Switch: No

cable lenght 2m with 1/4" stereo plug, minimum volume knob, dimensions B x H x T in mm: 86 x 54 x 200, weight: 400g
Made in: China

Sound buffer that protects against signal amount and quality loss which happens with large pedalboards with many pedals and with long cables. This buffer compensates for the loss of the signal and can work at the beginning or at the end of the effect line and doesn’t need any controls. Thanks to the components being used, the amount of hum is minimum. RockBoard Natural Sound buffer is encased in a durable metal construction, houses In/Out Jack inputs and is powered by a 9V power supply, which is not included.
Battery Operation: No
Type: Buffer
UK/EU Power supply included: No
Made in: China
Depth (cm): 3.3
Inputs: Mono
Outputs: Mono
Length (cm): 7.4
Colour: Black
Width (cm): 4.2
True Bypass: No…

The Palmer PW9V is a standard 9 volt power supply which can be used to power a range of electric guitar and bass effects pedals. With a maximum power consumption of 500 mA and lengthy cable of 1.50 metres the PW9V is the perfect addition to your set up as it allows you to save money on 9 volt batteries.

Soft carrying case with shoulder strap, padded. Dimensions: 800 x 390 x 85 mm. In a black finish.
Original Colour by Producer: Black;Black
Colour: Black
Made in: Germany
Padding: Yes
Type: Pedal Bag

Universal pedalboard made from aluminium, for the storage of all commercially available floor effects. The cross bars (covered with Velcro), height and the tilt of the Pedalboard can be individually adjusted. Power supplies can be mounted below the board. Dimensions: 600 x 390 x 70-85 mm. Weight Pedalbay: 5,15 kg. Accessories (included): 2x black elastic bands, approx. 3,5 m hook tape, soft carrying case with shoulder strap, allen key.
Colour: Black
Type: Pedalboard
Original Colour by Producer: Black;Black
Made in: Germany

Universal pedalboard made from aluminium, for the storage of all commercially available floor effects. The cross bars (covered with Velcro), height and the tilt of the Pedalboard can be individually adjusted. Power supplies can be mounted below the board. Dimensions: 605 x 305 x 70-85 mm. Weight Pedalbay: 4,62 kg. Accessories (included): 2x black elastic bands, approx. 3m hook tape, soft carrying case with shoulder strap, allen key.
Original Colour by Producer: Black;Black
Colour: Black
Type: Pedalboard
Made in: Germany

Soft carrying case with shoulder strap, padded. Dimensions: 600 x 390 x 85 mm. In a black finish.
Padding: Yes
Colour: Black
Type: Pedal Bag
Original Colour by Producer: Black;Black
Made in: Germany

Soft carrying case with shoulder strap, padded. Dimensions: 605 x 305 x 85 mm. In a black finish.
Colour: Black
Made in: Germany
Type: Pedal Bag
Original Colour by Producer: Black;Black
Padding: Yes

The Palmer Pedalbay 50S is a lightweight and cleverly designed pedalboard which can be used to mount a range of guitar or bass effects pedals with the included Velcro tape. The crossbars come with fleece-side Velcro pre-installed allowing for a super speedy setup to get you gigging right away. Elasticated straps and built-in metal hooks on the rear of the board allow simple mounting for a power supply DI Box or other peripheral device. Additionally the Pedalbay 50S comes with a padded case to provide a quick set up and protection when in transit.