Car Jacks

Expert Quality, polyester webbing, 50mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 1000kg for a load at one end (straight configuration) and 2000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 1+A1 Features & Benefits: • Expert Quality • Polyester webbing 50mm wide with reinforced lifting eyes • Colour coded to European standards to identify capacity • The safe working load (SWL) is rated at 1000kg for a load at one end (straight configuration) • The safe working load (SWL) is rated at 2000kg for a load between the loop eyes ('U' configuration) …

Jacking beam lifts load with compressed air. Fully certified and approved to comply with MOT requirements. Features 2-stage mechanical safety lock and telescopic finger guards to prevent accidental injury. Supplied with two pairs of aluminium support blocks. Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded, they firmly stabilise the unit. Optional hook arms supplied. Wide lift configuration meets MOT recommendation for lifting on jacking point. Features & Benefits: • Lifts load with compressed air. • Air Pressure: 90-145psi • Fully certified and approved to com…

Ideal for workshop or roadside use, this jack takes the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead man’s handle which also aids controlled lowering speed. Supplied with extensions that close the gap between the saddle of the jack and the jacking point. See table for detailed specification. Features & Benefits: • Max. Height (inc. extn.): 472mm @ 15tonne, 393mm @ 30tonne. • Air Consumption: 10.5cfm. • Spring loaded dead man's control. • Handle locks in position at three different angles. • Lifts heavy plant, tractors and commercial vehicles. • Extensions: 45, 75mm. • Model No. YAJ15-30

Faithfull Lifting Slings are made from 100% PES polyester duplex webbing that is lightweight but extremely durable for use on awkward loads, offering a soft alternative to wires and chains. All sizes can be used in straight pull, basket or choke configurations. Fitted with a reinforced, sleeved lifting eye. Meets the requirements of EN 1492 Part 1:2000. Minimum breaking load is 7 times the Working Load Limit.The Faithfull Green Lifting Sling has the following specifications: Max. Load: 2 Tonne.Width: 60mm.Length: 2m.Additional Information:• Length: 2.0m• Type: Lifting Sling• Load Capacity: 2000kg• Breaking Strength: 14000kg

Designed to prevent damage to the underside of the vehicle's jacking point. Type B design. Fits inside the jack saddle. Features & Benefits: • Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 18mm. • Size: Ø117mm. • Fits saddle Ø112-117mm. • Model No. JP18 Specifications: Model No JP18 Brand: Sealey Nett Weight: 0.235kg Jack Pad Size: Ø117mm Style: Type B Profile Depth: 18mm To Fit Saddle Size: Ø112-117mm Weight: 0.235kg

Everbuild Black Jack 902 Bitumen & Flashing Primer is a thin black primer used to give a key prior to applying bitumen paints and roof coatings. Also suitable as a primer prior to applying Black Jack Flashing Tape.

Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one end (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Features & Benefits: • Expert Quality • Polyester webbing 120mm wide with reinforced lifting eyes • Colour coded to European standards to identify capacity • The safe working load (SWL) is rated at 4000kg for a load at one end (straight configuration) • The safe working load (SWL) is rated at 8000kg for a load between the loop eyes ('U' configuration) …

All steel construction with bolted height adjustment. Ideal for long term motorcycle storage. Sold in pairs. Features & Benefits: • All steel construction with bolted height adjustment. • Ideal for long term motorcycle storage. • Sold in pairs. • Model No. SAS01 Specifications: Model No SAS01 Brand: Sealey Nett Weight: 2.04kg Capacity: 100kg Minimum Height: 325mm Maximum Height: 395mm

Ideal for workshop or roadside use, these jacks take the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead man’s handle which also aids controlled lowering speed. Supplied with extensions that close the gap between the saddle of the jack and the jacking point. A comprehensive range of nine models, see logo beside each jack for main features and the table beside for detailed specification. Features & Benefits: • Max. Height (inc. extn.): 463mm @ 30 Tonne. • Air Consumption: 10.5cfm. • Spring loaded dead man's control. • Handle locks in position at three different angles. • Lifts heavy plant, tractors and commercial vehicles. • Extensions: 45…