Car Jacks

Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. Sup more→plied with 90 rotating pump and telescopic pump handle. Service kit readily available.

This professional 2 tonne long reach jack is a must for the workshop. Its large 130mm saddle and foot operated lifting pedal makes jacking point location quick and easy and the handle mounted twist re more→lease valve ensures controlled and predictable lowering.

【Tips】 You need to lift the furniture 0.2 inch above the ground, so that the furniture lifter is below the furniture, and the height of your feet cannot exceed 0.5 inches/1.3 cm to prevent the furnitu more→re from tilting. Not easy to use on the carpet. 【Heavy Furniture Move Instructions】Place the lifter under the furniture and lift it (you can raise the furniture to 2 inches high), and then push the 4 rollers into the four corners. It can withstand 150 KG / 330 pounds of heavy objects, so you can easily move furniture or heavy objects. 【Premium Material】 Made of durable steel body, PVC plastic spray handle and non-slip design. The 4 filling rollers are made of ABS plastic. 【Safety

Note: Image is for illustrative purposes only and may differ from the actual product

Trolley Jack / Max Load 2 t / Hubhöhe 330 mm / Unterfahrhöhe 135 mm / 8.7 kg / Cushions

Set of 2.25 Tonne Trolley Jack and 2 x Axle Jack Stand 2 tons Quality lifting equipment for vehicle repair and tyre change | Heavy duty quality Excellent stability with 2 special bearing wheels Tro more→lley Jack Lifting range: 135-330 mm | Axle Jack Stand Min. lifting height 282mm Max. lifting height 430mm

Made primarily for the motor racing enthusiast this jack weighs in at just 17.6kg. Utilises many weight saving techniques such as a skeletal lift arm. Features Rocket Lift by use of twin pistons bri more→nging saddle to maximum height in minimal pumps. Polyurethane wheels for smooth and quiet manoeuvring which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast lightweight pick-up.1.8 Tonne Aluminium Low Profile Trolley Jack with Rocket Lift• Min./Max. Saddle Height: 85/425mm allowing low entry.• Chassis Length: 637mm.• Made primarily for the motor racing enthusiast this jack weighs in at just 17.6kg.• Utilises many

Technical Specifications Type: Car lift accessories Material: Rubber Color: Black 4Pcs Round Shape: Round Diameter: 130mm Features and Benefits ● This is a set of 4 HEAVY DUTY lift pads. ● These wer more→e found on many different brand lifts. ● These are very thick and very durable. They are able to hold up to sharp sub-frames and pinch weld lifting points. Notice 1. Please allow 1-2mm error due to manual measurement.Pls make sure you do not mind before you bid. 2. The color may have different as the difference display,pls understand. Package Included 4 x Rubber Arm Pads

Pit Jack 0,3Ton Note: Image is for illustrative purposes only and may differ from the actual product

Cat6 RJ45 Keystone Jack Network Coupler TheC6KEYCOUPLWH White Cat6 RJ45 Coupler offers a practical, cost-effective solution for joining two of your Category 6 patch cables together, enabling you to ex more→tend the length of both cables in order to form one longer cable. With the form factor design of an RJ45 Keystone Jack, this network coupler can also be installed in a keystone wall plate or patch panel. Durably constructed of only top quality materials, this keystone coupler is backed by StarTech.coms Lifetime Warranty.

Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. All more→models supplied with 90° rotating pump and telescopic pump handle. Fitted with moulded carry handle incorporating storage for the pump handle. Service kit readily available.

Professional quality bottle jack with a telescopic two stage hydraulic ram and screw extension provides a much greater maximum while maintaining a low minimum height level.

To suit the Kennedy Heavy Duty 1/2 Ton Transmission Jack (KEN-503-7160K) illustrated. N.B. Jack not included.

Ultra compact Scissor Jack For Small Cars Car Lifting Scissor Jack Capacity: 0.8 ton The Car Jack is made from High quality steel Car Lift Jack Lifting range: 100 - 320 mm Jack Dimension: 365x80x100mm

VEVOR Floor Jack, 4 Ton Low Profile Floor Jack, Heavy-duty Steel Racing Floor Jack With Dual Piston Quick Lift Pump, Floor Jack Lifting Range 100 mm-533 mmPowerful CapacityBuilt to LastEasy to Operate more→No More Damage to VehiclesReliable SealingSmooth-RollingMagnetic Tool TrayHandle Length: 52 in/1320 mm,Product Size (L x W x H): 29x13.5x6.4 (inch)/740x343x162 (mm),Lift Weight Capacity: 8800 LBS/4 Tons,Model: K560,Product Weight: 76.6 lb/37.95 kg,Load Bearing Method: Hydraulic Dual Pump,Maximum Height: 20.98"/533 mm,Material: Steel,Tray Diameter: Φ 4.3 in/110 mm,Minimum Height: 3.94"/100 mm