Car Jacks

• Heavy-duty 6 Tonne axle stands.• Sturdy welded steel construction for superior safety and strength.• Supplied with captive pin load support.• Range available in five different colours.• Sold in pairs.• 2 Year guarantee*.Heavy-duty axle stands to safely support vehicles for extended periods of time. Large crutches for good load distribution. The heavy gauge steel frame and welded construction gives superior strength and safety. All stands feature captive, multi-position pin load support. Sold in pairs.• Min./Max. Working Height: 369/571mm. • Capacity: 12tonne per pair. • Sturdy welded steel construction. • Captive pin load support. • Range available in five different colours. • Sold in pairs. • 2 …

Ideal for workshop or roadside use, these jacks take the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead man’s handle which also aids controlled lowering speed. Supplied with extensions that close the gap between the saddle of the jack and the jacking point. A comprehensive range of nine models, see logo beside each jack for main features and the table beside for detailed specification. Features & Benefits: • Max. Height (inc. extn.): 463mm @ 30 Tonne. • Air Consumption: 10.5cfm. • Spring loaded dead man's control. • Handle locks in position at three different angles. • Lifts heavy plant, tractors and commercial vehicles. • Extensions: 45…

• Jacking beam lifts load with compressed air.• Fully certified and approved to comply with MOT requirements.• Features 2-stage mechanical safety lock and telescopic finger guards to prevent accidental injury.• Supplied with two pairs of aluminium support blocks.• Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded, they firmly stabilise the unit.• Optional hook arms supplied.• Wide lift configuration meets MOT recommendation for lifting on jacking point.• This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.Ja…

• Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles.• Enables easy movement around bodyshop.• The supports are interchangeable between V-crutches and sill clamps.• Supports and clamps adjustable for height and overall width.• Fitted with four ø125mm nylon castors, two of which lock.Heavy-duty steel frame suitable for supporting partly dismantled or badly damaged vehicles. Enables easy movement around bodyshop. The supports are interchangeable between V-crutches and sill clamps. Supports and clamps adjustable for height and overall width. Fitted with four ø125mm nylon castors, two of which lock.• Heavy-duty steel frame suitable for supporting p…

• A fully adjustable saddle with forward, backward and side-to-side tilt.• Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the combination. e.g. 600GA and ADT3 - Maximum capacity is 500kg.Fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ.• A fully adjustable saddle with forward, backward and side-to-side tilt. • Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ. • Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the com…

• A fully adjustable saddle with forward, backward and side-to-side tilt.• Suitable for use with Model No's. 500TTJ and 800TTJ.Fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for use with Model No's. 500TTJ and 800TTJ.• A fully adjustable saddle with forward, backward and side-to-side tilt. • Suitable for use with Model No's. 1000ETJ, 1000TR, 1000TRQ, 1500TR. • Model No. ADT5Technical Specification:Capacity: 1000kgCompatibility: 500TTJ and 800TTJ.Nett Weight: 23.69kgDimensions: Length: 315mm x Height: 350mmWeight: 24.6KgWarranty: 1 year

Single-piece hydraulic unit with heavy base design. Integral cog-type release mechanism and long 2-piece handle. Protective jack handle sleeve helps prevent accidental damage to car bodywork when pumping the handle. Heavy-duty castors and extra-large saddle design ease positioning under vehicle. Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension. Ideal for loaded vans up to 3.5 Tonne GVW. Features & Benefits: • Min./Max. Saddle Height: 130/520mm. • Chassis Length: 659mm. • Integral cog-type release mechanism and long 2-piece handle. • Heavy-duty swivel castors and extra-large saddle design ease positioning under vehicle. • Fitted with safet…

Package Includes: Model No. - Description 3000CXD - Trolley Jack 3tonne Standard Chassis AS3 - Axle Stands (Pair) 3tonne Capacity per Stand - White You may also refer to the individual Model No. for full specification.

High lift jack arm with incredibly low access height of just 80mm. Fitted with quick lift foot pedal and dead man's control. Heavy-duty long steel chassis with wide wheelbase provides inherent stability and easy-access to deep set jacking points. Fitted with one-piece hydraulic unit with built-in safety overload protection. Features & Benefits: • Min./Max. Saddle Height: 80/805mm, allowing low entry. • High lift jack arm with incredibly low minimum access height of just 80mm. • Fitted with quick lift foot pedal and dead man's control. • Heavy-duty long steel chassis with wide wheelbase provides inherent stability and easy-access to deep set jacking points. • Fitted with one-piece hydraulic …

Portable Trolley Jack Kit for light domestic use. Ideal for roadside recovery. Package includes: 1020LEHV - Trolley Jack 2 Tonne Low Profile Short Chassis - Hi-Vis Green AP600JB - Trolley Jack Bag (W x D x H: 600 x 300 x 200mm) AS2000F - Axle Stands (Pair) 2 Tonne Capacity per Stand - Folding Type WCF01 - Folding Wheel Chocks - Pair S0472 - Extendable L-Bar Wrench Set 3pc 1/2"Sq Drive Features & Benefits: • Package includes: • Model No. - Description • 1020LEHV - 2 Tonne Low Profile Short Chassis Trolley Jack - Hi-Vis Green • AP600JB - Trolley Jack Bag (W x D x H: 600 x 300 x 200mm) • AS2000F - Folding Axle Stands (Pair) 2 Tonne Capacity per Stand • WCF01 - Folding Wheel Chocks - Pair • S04…