Car Jacks

Hydraulic jack, for horizontal and vertical use, max. load 5 t. Supplied = assembled. Max. load = 5 t. Lifting range with lifting head = 368 - 573 mm. Lifting range with lifting toe = 25 - 230 mm. Lif more→t = 205 mm. Weight = 25 kg. Floor clearance = 26 mm. Product type = hydraulic jacks. Can be used horizontally and vertically, housing rotates 360. Low maintenance hydraulics with overload valve. Release valve with automatic position return and removable pump lever. The two sided hydraulic jack can be used safely when the ground clearance is 26 mm or more. Its precise lowering regulation allows heavy goods to be lowered slowly and in a controlled manner.

The Sealey cross beam adaptor is ideal for use with front wheel drive vehicles and is suitable to be used with jacks with a 31 - 33mm saddle spigot pin. This cross beam also provides extra when locati more→ng awkward jacking points and the robust manufacture makes this an ideal tool for any workshop or garage.

Seal Repair Kit for ZT1120439X by Kennedy

VEVOR Floor Jack, 3 Ton Low Profile Floor Jack, Heavy-duty Steel Racing Floor Jack With Single Piston Quick Lift Pump, Floor Jack Lifting Range 130 mm-508 mmPowerful CapacityBuilt to LastEasy to Opera more→teNo More Damage to VehiclesReliable SealingSmooth-RollingTwo-section HandleHandle Length: 45 in/1145 mm,Product Size (L x W x H): 25.8x12.8x6.7 (inch)/656x325x170 (mm),Lift Weight Capacity: 6600 LBS/3 Tons,Model: S508,Product Weight: 32.3 kg/71.2 lb,Load Bearing Method: Hydraulic Single Pump,Maximum Height: 20"/508 mm,Material: Steel,Tray Diameter: Φ 4.3 in/110 mm,Minimum Height: 5.12"/130 mm

Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height. Made in the EU and fitted with safety overload valve. One-piece steel base reservoir and pump cylinde more→r design gives added strength. Supplied with zinc coated handle.2 Tonne Bottle Jack with Telescopic Ram• Min./Max. Height: 145/360mm.• Telescopic hydraulic ram allows a reduced closed height without compromising maximum lift height.• Made in the EU and fitted with safety overload valve.• One-piece steel base reservoir and pump cylinder design gives added strength.• Supplied with zinc coated handle.• 3 Year Guarantee*.• Model No. PTBJ2Model No: PTBJ2:Brand: Premier:Capacity: 2

Single-piece hydraulic unit with heavy chassis design. Integral American cog-type release mechanism and long 2-piece handle. Heavy-duty castors and large saddle design ease positioning under vehicle. more→Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension. Supplied with a pair of ratchet type axle stands, 3tonne (3000kg) capacity per stand (6tonne (6000kg) per pair). Ideal for loaded vans up to 3.5tonne GVW.

Flat design: Due to the low underrun height of only 85 mm, this trolley jack is ideal for lowered vehicles and sports cars. Stable and light: high-quality and solid design made of durable material fo more→r durable and reliable use – ideal for everyday use in workshops, craft businesses or in the home garage. Quick lifting: the robust hydraulic unit with double piston pump ensures quick and effortless lifting of the vehicle. The lifting and lowering can be smoothly and easily regulated. Mobile and reliable: the trolley jack is equipped with 2 fixed and steerable wheels, so it can be easily moved. Thanks to the safety valve and the double seals, this jack reaches a very special safety standard. …

The EVOcrk is a professional quick-lift hydraulic jack designed for rally car use. Weighing only 3.5kg the EVOcrk folds up to a compact package when not in use so can easily be stored in the rally car more→.Operation of the jack is simple, an adjustable height 22mm diameter pin inserts into a tube on the car body. Pump the handle and the car lifts, it takes only 9/10 strokes to reach the full height of 610mm. The base of the jack is made from a durable polymer with a grippy rubber sole so it provides support and grip on most surfaces. The base also swivels to account for the jack angle changing as the car is raised or lowered.  Technical Specifications Base Adjustable for extra

Bottle jack, with hydraulic unit, max. load 20 t, 4+ items. Supplied = assembled. Max. load = 20 t. Lifting range with lifting head = 235 - 440 mm. Lift = 145 mm. Weight = 10 kg. Overall height from - more→to = 235 - 440 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle

Note: Image is for illustrative purposes only and may differ from the actual product

Furniture mover, hydraulic, pack of 2, max. load 2000 kg, lift 200 mm. Supplied = assembled. Lift = 200 mm. Max. load = 2000 kg. Frame material = steel. Frame colour = light blue RAL 5012. Width = 660 more→mm. Height = 1000 mm. Depth = 420 mm. Wheel diameter = 150 mm. Wheel fittings = heavy duty wheels. Wheel bearing = ball bearing. Wheel type = non-marking. Finish = zinc plated and powder coated. Footplate width = 590 mm. Footplate depth = 80 mm. Lifting range = 8 - 200 mm. Product type = furniture transport units. Application = diverse. Ideal for moves, maintenance or fitting. Non-marking wheel tyres for protecting carpets and floors. Completely assembled and ready for immediate use. Ship heavy …

All steel construction compact heavy duty unit with lifting range 135-340mm. Portable and easy to operate with swivel castors. Built in pump overload prevents over loading for safe operation with hydr more→aulic bypass system to stop ram over travel. Product size: 470 x 200 x 140mm, weight 8.5kg, packaged in colour box.

The WINNTEC® from SIP 10 TON Low-Profile Bottle Jack is perfect for pushing and pressing in garages and workshops, with increased versatility achieved through full horizontal and vertical operatio more→n and performance via heavy-duty components. Suitable for automotive and commercial vehicles in garages and workshops. KEY FEATURES 120mm to 260mm lifting height range Low-profile design ideal for performance vehicles 45mm and 6mm screw extensions for high versatility Heavy-duty wide cast iron base spreads weight Designed for horizontal and vertical operation WINNTEC® from SIP 3-Year Warranty

Bottle jack, with hydraulic unit, max. load 20 t. Supplied = assembled. Max. load = 20 t. Lifting range with lifting head = 235 - 440 mm. Lift = 145 mm. Weight = 10 kg. Overall height from - to = 235 more→- 440 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle accessory.