Car Jacks

• Jacking beam lifts load with compressed air.• Fully certified and approved to comply with MOT requirements.• Features 2-stage mechanical safety lock and telescopic finger guards to prevent accidental injury.• Supplied with two pairs of aluminium support blocks.• Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded, they firmly stabilise the unit.• Optional hook arms supplied.• Wide lift configuration meets MOT recommendation for lifting on jacking point.• This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.Ja…

• Replacement hydraulic ram for PH30 engine crane.Replacement hydraulic ram for PH30 engine crane.• Replacement hydraulic ram for PH30 engine crane. • Model No. PH30.01Technical Specification:Nett Weight: 14.7kgRam Capacity: 1200kgRam Diameter: 38.05mmRam Travel: 494mmPump Type: Single SpeedRam Pin Hole Diameter: 22.2mmClevis Pin Hole Diameter: 21.4mmMounting Point Distance (Min): 650mmOverall Length (Min): 690mmBase mount Type: Double ClevisDimensions: Length: 180mm x Height: 140mmWeight: 15.8KgWarranty: Consumable

Use in conjunction with Model No. RE91/05 Pull Ram. The kit contains 2 x 2m chains each with one hook and two heavy-duty pull clamps. Features & Benefits: • Use in conjunction with Model No. RE91/05 Pull Ram. • The kit contains 2 x 2m chains each with one hook and two heavy-duty pull clamps. • Model No. RE91/5/CK Specifications: Model No RE91/5/CK Brand: Sealey Nett Weight: 12.60kg

• All steel stand with pin and chain load support and full width crutches for safe support of load.• Designed to support part of a vehicle that is being used on a lift where free access is required. • Stands also help prevent the tipping/rocking of the vehicle.• Note: These stands should not be used to support a vehicle on their own. Sold as singles, but MUST be used in pairs.All steel stand with pin and chain load support and full width crutches for safe support of load. Designed to support part of a vehicle that is being used on a lift where free access is required. Stands also help prevent the tipping/rocking of the vehicle.Note: These stands should not be used to support a vehicle on their…

• Replacement hydraulic ram for SC10LR.V2 engine crane.Replacement hydraulic ram for SC10LR.V2 engine crane.• Replacement hydraulic ram for SC10LR.V2 engine crane. • Model No. SC10LR.V2-23Technical Specification:Nett Weight: 13kgRam Capacity: 7257kgRam Diameter: 33.93mmRam Travel: 495mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.7mmMounting Point Distance (Min): 620mmOverall Length (Min): 655mmBase Mount Type: Double ClevisWeight: 13.003KgWarranty: Consumable

• Heavy-duty 6 Tonne axle stands.• Sturdy welded steel construction for superior safety and strength.• Supplied with captive pin load support.• Range available in five different colours.• Sold in pairs.• 2 Year guarantee*.Heavy-duty axle stands to safely support vehicles for extended periods of time. Large crutches for good load distribution. The heavy gauge steel frame and welded construction gives superior strength and safety. All stands feature captive, multi-position pin load support. Sold in pairs.• Min./Max. Working Height: 369/571mm. • Capacity: 12tonne per pair. • Sturdy welded steel construction. • Captive pin load support. • Range available in five different colours. • Sold in pairs. • 2 …

Expert Quality, for semi - permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Carton packed.

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 4 metre

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 7.5mm. Size ø104mm. Fits saddle ø93-95mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 7.5mm. • Size: ø104mm. • Fits saddle ø93-95mm. • Model No. JP09Technical Specification:Nett Weight: 0.05kgJack Pad Size: ø104mmStyle: Type BProfile Depth: 7.5mmTo Fit Saddle Size: ø93-95mmWeight: 0.05kgDimensions: Length: 20mm x Height: 280mmWeight: 0.074KgWarranty: Consumable