Car Jacks

• Features width adjustment from 180-255mm, making it suitable for almost all motorbikes. • Design ensures rim and tyre protection at all times.• Allows easy removal and cleaning of front wheel.• Please note all front paddock stands need to be used in conjunction with a suitable rear stand to ensure bike stability (See Model No. RPS2KD).• Delivered in knock-down form to reduce freight costs, some self-assembly required.Technical SpecificationNett Weight: 3.5kgMinimum/Maximum Width: 180-255mmTechnical Specification:Minimum Width: 180mm Maximum Width: 255mmDimensions: Length: 110mm x Height: 110mmWeight: 4.1KgWarranty: 1 year

• Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes.• N.B. Never use brake fluid to top-up a hydraulic unit.Hydraulic oil recommended for use in all jacks (trolley and bottle) and cranes.N.B. Never use brake fluid to top-up a hydraulic unit.• Recommended for use in all jacks (trolley and bottle) and cranes. • Model No. HJO500MLSTechnical Specification:Nett Weight: 0.47kgPack Qty: 1Size: 500mlDimensions: Length: 60mm x Height: 213mmWeight: 0.472KgWarranty: Consumable

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 3 metre

Protective jack handle sleeve, helps prevent accidental damage to car body work when pumping the handle. Made from an EVA material which is oil resistant. Suitable for all jack handles with 30mm diameter.

Polished aluminium with steel pocket clip. Designed for pinpoint lubrication to small and awkward areas. 40mm length applicator needle with brass flow control button for fine control. Display packed.

Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams. When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge. In position, and when the beam is under load, the bearings retract, to leave the flat of the arm, to stabilise the lift.Features & Benefits:• Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams.• When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge.• In position, and when the beam is under load, the bearings retract to leave the flat of the arm to stabilise the lift.• Model No. SJBEX.A01Speci…

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Powerful – the pneumatic car jack uses 5 to 10 bar compressed air to effortlessly raise vehicles up to 3000 kg with the aid of air cushions
Fast – the air jack for cars reaches its 40 cm maximum lifting height in just 5 s, so you can get to work right away
Safe – a large base and a support with a diameter of 10 cm provides stability to the air cushion car jack, while an overpressure valve protects against excessive loads
Flexible – the two handles with rubberised ends ensure the pneumatic jack is always in the optimum position
Stable – built with steel and featuring three air cushions, the construction is robust and durable, while an adjustable inner cylinder provides added stability when exten…

High-density plastic with anti-slip steel bar. Prevents a maximum 30tonne vehicle’s movement when being jacked on a level surface or parked on an incline not exceeding 12°. Steel chock bracket designed to mount to wall or trailer. Features & Benefits: • High-density plastic with anti-slip steel bar. • Prevents a maximum 30 Tonne vehicle’s movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Steel chock bracket designed to mount to wall or trailer. • Chock Dimensions (H x L x W): 225 x 475 x 200mm. • Chock Weight: 1.7kg. • Bracket Weight: 1.36kg. • Model No. CV127 Specifications: Model No CV127 Brand: Sealey Dimensions (W x D x H): 200 x 475 x 225mm Materi…

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.