Car Jacks

The JCB-TH32506S is a robust, low-profile and double-pump hydraulic off-road SUV trolley jack designed to offer a maximum lifting capacity of up to 2.5 tonnes in weight.Courtesy of its aluminium construction, the JCB-TH32506S is capable of lifting SUVs, cars, light commercial vehicles and any other vehicle which requires high ground clearance up to 525mm in height in all conditions.In addition to its default 525mm maximum height clearance, the JCB-TH32506S comes equipped with 2x saddle extensions, which can increase the trolley jack’s maximum ground clearance up to 677mm.The JCB-TH32506S’ chassis utilises a low-profile design, which allows the trolley jack to reach lower clearances, particularly usef…

Clarke's CTJ4000G heavy duty trolley jack is designed specifically for use in professional garages and workshops. This jack's features include a single piece hydraulic unit for maximum reliability, heavy gauge base construction and heavy duty wheels and castors.

Universal Engine & Gearbox SupportDesigned to support the engine or gearbox when the engine mountings have been removed - e.g. When replacing timing / drive belts, water pumps etcRemoves the need for using cranes, transmission jacks etcUniversal tool designed for all makes of vehicle - No need for costly model specific bracketsThe unit is suspended from the chassis via the support hooks, the engine / gearbox is supported by the support pad and is counter-balanced against the underside of the vehicle by the support armsFully adjustable in all dimensions:- Extension: Min 630mm / Max 960mm- Support Plate Adjustment: 190mmSpare Parts:38360000-01 - Support Pad & Adjustable Bar

Startech Cat6 RJ45 Keystone Jack Network Coupler The C6KEYCOUPLER Cat6 RJ45 Keystone Jack Coupler offers a practical, cost-effective solution for joining two RJ45-terminated cables together, to form one long cable.The RJ45 Coupler offers both durability and dependability and is backed by Lifetime Warranty.

Made primarily for the motor racing enthusiast this jack weighs in at just 17.6kg. Utilises many weight saving techniques such as a skeletal lift arm. Features Rocket Lift by use of twin pistons bringing saddle to maximum height in minimal pumps. Polyurethane wheels for smooth and quiet manoeuvring which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast lightweight pick-up.1.8 Tonne Aluminium Low Profile Trolley Jack with Rocket Lift• Min./Max. Saddle Height: 85/425mm allowing low entry.• Chassis Length: 637mm.• Made primarily for the motor racing enthusiast this jack weighs in at just 17.6kg.• Utilises many

Low entry short chassis jack Ideal for reduced clearance vehicles Portable and compact design for easy storage, Steel chassis Rear swivelling steel castors Draper 12 months parts and labour warranty

The Draper PJ40LC is a long chassis, extra low profile pneumatic jack that is capable of lifting 40 tonnes, with a 125mm entry height that has a total reach of 2210mm. This jack is supplied with 45mm and 75mm height lift extensions which provide a maximum height of 302mm at stage 1, 347mm at stage 2 and 396mm at stage 3. You can use this product easily and safely thanks to its three stage adjustable ergonomic handle, equipped with a “Slow Down” valve and a “Self-Return” switch. To further help your use of this device, and to increase its manoeuvrability, this jack is fitted with twin rubber-coated wheels which also provide a quieter and smoother operation, as well as

Note: Image is for illustrative purposes only and may differ from the actual product

Trolley Jack / Max Load 2 t

Quickly and safely overcomes the awkward job of lifting 4x4 vehicles with offset differentials. Simply remove the existing trolley jack saddle, replace with cross beam adaptor, fit the jack saddle into the hole in the adaptor* (30mm max spigot pin) and you are ready to lift. Suitable for jacks with a 30mm saddle spigot pin. *Note: Remove any rubber jack pad from the saddle before using to improve safety.

Professional quality bottle jack with a telescopic two stage hydraulic ram and screw extension provides a much greater maximum while maintaining a low minimum height level.- 12 Tonne Capacity- Height range - mm : 235-580- Heavy duty machine welded base for increased stability and reliability- 3 piece pumping handle- Carrying handle- Complies with latest European standardsPTDCLA7621795

The Gojak is the ultimate system for moving vehicles in confined areas, or for removing obstructing vehicles without hassle or keys. Vehicles can be moved quickly, easily and safely without entry. They roll easily in any direction.Easy entryEasy liftEasy movement2 jacks permit a full 180 degree vehicle pivot, 4 jacks will place the vehicle on 360 degree rolling platform. Mechanical leverage applied by the foot pedal progressively "squeezes" the vehicle tyre between the rollers until the tyre lifts smoothly off the ground. The rollers touch only the tyre, no contact with the vehicles frame or undercarriage is necessary. Their low centre of gravity after lifting helps make the Gojak safe and

Designed for raising and lowering cars and vehicles in a workshop or garage environment. Lightweight and portable with a handy blow-moulded carry case for storage, this kit will enable you to easily replace parts, repair or perform maintenance on your vehicle safely and efficiently. Kit Comprises: 1 x 2 Tonne Hydraulic jack trolley with handle 2 x Wheel Chocks 2 x Axle Stands 1 x Instruction Manual

Pit Jack 0,3Ton Note: Image is for illustrative purposes only and may differ from the actual product