Car Jacks

This robust engine crane has a maximum capacity of 1 Tonne. The single piston hydraulic pump ensures rapid lifting of an engine out of its bay with little effort. There are four pre-set jib positions, more→with a maximum capacity of 250kg when the jib is fully extended. The outrigger legs can be folded to optimise storage workshop space or for easy transportation. There are six robust castor wheels to allow safe and easy mobility. For safety they are twin overload valves to prevent exceeding capacity. This engine crane is compatible with a wide range of load slings and levellers. Manufactured to EN1494 Specification Features & Benefits: • Three pre-set jib positions for lifting • Single …

Condition: New Item Length: 6.5m Type: Mechanical Jack Country/Region of Manufacture: China Item Height: 3.5cm Item Weight: 80g Item Width: 6.5cm Material: Rubber Special Features: Jack Pad Package Include:1pc

This professional quality bottle jack has: Capacity (Tonnes): 3 Jack Height (Min-Max): 180-350mm Weight: 3.28kg tough cast iron base with screw in components High quality polished steel ram w more→ith additional screw in/out height adjuster. Three piece pumping handle Automatic overload protection

Note: Image is for illustrative purposes only and may differ from the actual product

Portable Trolley Jack Kit for light domestic use. Ideal for roadside recovery. Package includes: 1020LEB - Trolley Jack 2tonne Low Entry Short Chassis - Blue AP600JB - Trolley Jack Bag 600mm AS2000F - more→Axle Stands (Pair) 2tonne Capacity per Stand - Folding Type WCF01 - Folding Wheel Chocks - Pair S0472 - Extendable L-Bar Wrench Set 3pc 1/2"Sq Drive You may also refer to the individual Model No. for full specification.

This professional 2 tonne long reach jack is a must for the workshop. Its large 130mm saddle and foot operated lifting pedal makes jacking point location quick and easy and the handle mounted twist re more→lease valve ensures controlled and predictable lowering.

High lift jack arm with incredibly low access height of just 80mm. Fitted with quick lift foot pedal and dead mans control. Heavy-duty long steel chassis with wide wheelbase provides inherent stabilit more→y and easy-access to deep set jacking points. Fitted with one-piece hydraulic unit with built-in safety overload protection.2 Tonne High Lift Low Profile Trolley Jack• Min./Max. Saddle Height: 80/805mm allowing low entry.• High lift jack arm with incredibly low minimum access height of just 80mm.• Fitted with quick lift foot pedal and dead mans control.• Heavy-duty long steel chassis with wide wheelbase provides inherent stability and easy-access to deep set jacking points.• Fitted

VEVOR Low Profile Floor Jack 4 Ton Heavy Duty Steel Dual Piston Rapid PumpPowerful CapacityBuilt to LastEasy to OperateNo More Damage to VehiclesReliable SealingSmooth-RollingMagnetic Tool TrayHandle more→Length: 49.6 in/1260 mm,Product Size (L x W x H): 29x13.5x6.4 (inch)/740x343x162 (mm),Lift Weight Capacity: 8800 LBS/4 Tons,Model: K560,Product Weight: 100 lbs/45.55 kg,Load Bearing Method: Hydraulic Dual Pump,Maximum Height: 20.98"/533 mm,Material: Steel,Tray Diameter: Φ 4.7 in/119 mm,Minimum Height: 3.94"/100 mm

Pit Jack 0,5 Ton Note: Image is for illustrative purposes only and may differ from the actual product

Loading support for semi-trailers, max. load 25 t, contact surface Ø 200 mm. Supplied = assembled. Max. load = 25 t. Contact surface = Ø 200 mm. Adjustment range = 1000 - 1300 mm. Product type = uprig more→hts. High max. load due to steel construction. Chassis provides easy, fast positioning. Ball bearing base plate. The new Trailer Jack has greatly advanced the safety of semi-trailers and containers when being loaded and unloaded. The telescope loading prevents uncoupled trailers from tipping while being loaded by pallet trucks or due to load changes. This is positioned like a leg below the front edge or the suspension area of semi-trailers or containers.

The WINNTEC® from SIP 10 TON Long Chassis Jack is perfect for extreme lifting of trucks and heavy machinery, offering high-reach performance from a low-profile design and exceptionally safety usag more→e via automatic overload and universal joint release valves. Designed for all automotive garages and workshops. KEY FEATURES 160mm to 680mm lifting height range Low-profile design for lower ground clearances Foot-operated pump for effortless efficiency Heavy-duty steel wheels offer easy movement Handle with integrated load control knob WINNTEC® from SIP 3-Year Warranty

The Winntec From Sip 2 Ton Low-Profile Trolley Jack Is Perfect For Low Clearance Vehicles And Utilises A Unique Turbo-Lift System That Quickly Raises The Saddle To The Lift Point In One Swift Motion. more→• 2 Ton Maximum Weight Capacity • 75Mm To 510Mm Lifting Height Range • Low-Profile Design For Lower Clearance Vehicles • Turbo-Lift System Raises The Jack Contact Saddle To The Vehicle Lifting Surface In One Swift Motion • Heavy-Duty Pu Wheels Reduce Noise And Damage • Chrome-Plated Main Ram And Heat-Treated Dual Pump Pistons For Added Durability And Longer Life • Comfortable Rubber Grip With Extra Long Handle • Integrated Universal Joint Release Mechanism • Suitable For Cars

The Gojak is the ultimate system for moving vehicles in confined areas, or for removing obstructing vehicles without hassle or keys. Vehicles can be moved quickly, easily and safely without entry. The more→y roll easily in any direction.Easy entryEasy liftEasy movement2 jacks permit a full 180 degree vehicle pivot, 4 jacks will place the vehicle on 360 degree rolling platform. Mechanical leverage applied by the foot pedal progressively "squeezes" the vehicle tyre between the rollers until the tyre lifts smoothly off the ground. The rollers touch only the tyre, no contact with the vehicles frame or undercarriage is necessary. Their low centre of gravity after lifting helps make the Gojak safe and

Screw Jack 10000kg Non Sparking Al-Bron by EGA Master