Car Jacks

Powerful engine with variable speed control 1000-3000 rpm Soft start electronics for gentle start-up Spindle lock

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

Cat5e Keystone Jack Utp Orange 210577

Trolley Jack / Max Load 2 t

Bottle jack, with hydraulic unit, max. load 20 t, 4+ items. Supplied = assembled. Max. load = 20 t. Lifting range with lifting head = 235 - 440 mm. Lift = 145 mm. Weight = 10 kg. Overall height from - to = 235 - 440 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle

Scissor Jack 2 ton suitable for VW models cars SUV Max. working stoke 320 - 440 mm. Min. lifting height (folded) 104mm. Max. lifting height (full lifted) 440mm Can be used with 17 mm socket, incl. comfort extension bar, ratchet with practical rotary knob for easy cranking up Includes storage bag Equipped with a practical rotating saddle including a rubber pad and a sturdy crank with handle. HEYNER is German manufacturer of quality automotive tools and lifting equipment such as bottle jacks, axle jack stands, lift jacks and trolley jacks.sers to reach and operate the jack in hard-to-access points, providing added convenience and versatility.

Bottle Jack / Max Load 6 t

Bottle jack, with hydraulic unit, max. load 3 t. Supplied = assembled. Max. load = 3 t. Lifting range with lifting head = 168 - 318 mm. Lift = 100 mm. Weight = 2.3 kg. Overall height from - to = 168 - 318 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle accessory.

Quickly and safely overcomes the awkward job of lifting 4x4 vehicles with offset differentials. Simply remove the existing trolley jack saddle, replace with cross beam adaptor, fit the jack saddle into the hole in the adaptor* (30mm max spigot pin) and you are ready to lift. Suitable for jacks with a 30mm saddle spigot pin. *Note: Remove any rubber jack pad from the saddle before using to improve safety.

Chassis Stand / Max Load 3 t / 5.2 kg

Designed for raising and lowering cars and vehicles in a workshop or garage environment. Lightweight and portable with a handy blow-moulded carry case for storage, this kit will enable you to easily replace parts, repair or perform maintenance on your vehicle safely and efficiently. Kit Comprises: 1 x 2 Tonne Hydraulic jack trolley with handle 2 x Wheel Chocks 2 x Axle Stands 1 x Instruction Manual

BMW trolley jack rubber pad designed to avert damage to the underside of a BMW when using a trolley jack thus assisting in the prevention of rust on the underside of the vehicle's chassis. Made from durable and robust rubber. The rectangular locating rubber enables the pad to be secured within the unique BMW jacking port. For use with standard chassis trolley jacks with a saddle diameter of over 70mm.PTDDRPDIR41814

Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle.30 Tonne Bottle Jack• Min./Max. Height: 275/440mm.• Fitted with overload valve.• Base and reservoir machine welded. • Supplied with 2-piece handle.• 3 Year guarantee*.• Model No. PBJ30SModel No: PBJ30S:Brand: Viking:Capacity: 30 Tonne:Hydraulic Lift: 165mm:Maximum Height: 440mm:Minimum Height: 275mm:Nett Weight: 11.8kg:PTDSEAPBJ30S

Ultra compact Scissor Jack For Small Cars Car Lifting Scissor Jack Capacity: 0.8 ton The Car Jack is made from High quality steel Car Lift Jack Lifting range: 100 - 320 mm Jack Dimension: 365x80x100mm