Car Jacks

• Suitable for lower capacity single and twin cylinder engines.• Supports can rotate for accessibility to all parts of the engine.• Useful integral utility/drip tray.• Capacity: 30kg.Suitable for small capacity single and twin cylinder engines (maximum weight 30kg) and includes a utility/drip tray. Supports can rotate for accessibility to all parts of the engine.• Suitable for lower capacity single and twin cylinder engines. • Supports can rotate for accessibility to all parts of the engine. • Useful integral utility/drip tray. • Capacity: 30kg. • Model No. MES01Technical Specification:Capacity: 30kgEngine Support Span: 200-370mmHeight: 375mmLength: 535mmNett Weight: 7.89kgWidth: 320mmDimensions: L…

• Steel chassis with pedal operated mechanical lifting action.• Skate sits on easy-rolling ø100mm nylon castor wheels.• Composite rollers cradle vehicle’s tyre and are capable of handling up to 240mm profiles.• Suitable for bodyshops, garages, showrooms or anywhere an immobile vehicle needs moving on an even surface.• Capacity: 570kg per skate.• Note: Skates sold as singles, but must be used in pairs.Steel chassis with pedal operated mechanical lifting action. Skate sits on easy-rolling ø100mm nylon castor wheels. Composite rollers cradle vehicle’s tyre and are capable of handling up to 240mm profiles. Suitable for bodyshops, garages, showrooms or anywhere an immobile vehicle needs mo…

Bottle jack, with hydraulic unit, max. load 8 t. Supplied = assembled. Max. load = 8 t. Lifting range with lifting head = 200 - 385 mm. Lift = 125 mm. Weight = 5 kg. Piston diameter = 38 mm. Base plate length = 110 mm. Base plate width = 118 mm. Additional height when unwound = 60 mm. Overall height from - to = 200 - 385 mm mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also …

Specifications:Ports & interfaces: - Connector 1 : QD- Connector 2 : 3.5 mm- Connector 1 form factor: Straight- Connector 2 form factor: StraightSustainability- Sustainability certificates: CEPackaging data: - Package width: 135 mm- Package depth: 5 mm- Package height: 200 mm- Package weight: 40 g

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 7.5mm. Size ø104mm. Fits saddle ø93-95mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 7.5mm. • Size: ø104mm. • Fits saddle ø93-95mm. • Model No. JP09Technical Specification:Nett Weight: 0.05kgJack Pad Size: ø104mmStyle: Type BProfile Depth: 7.5mmTo Fit Saddle Size: ø93-95mmWeight: 0.05kgDimensions: Length: 20mm x Height: 280mmWeight: 0.074KgWarranty: Consumable

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Jacking beam lifts load with compressed air.• Fully certified and approved to comply with MOT requirements.• Features 2-stage mechanical safety lock and telescopic finger guards to prevent accidental injury.• Supplied with two pairs of aluminium support blocks.• Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded, they firmly stabilise the unit.• Optional hook arms supplied.• Wide lift configuration meets MOT recommendation for lifting on jacking point.• This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.Ja…

• Replacement hydraulic ram for SC10.V3 engine crane.Replacement hydraulic ram for SC10.V3 engine crane.• Replacement hydraulic ram for SC10.V3 engine crane. • Model No. SC10.V3-ETechnical Specification:Nett Weight: 9.6kgRam Capacity: 3000kgRam Diameter: 27.88mmRam Travel: 515mmPump Type: Single SpeedRam Pin Hole Diameter: 16.5mmClevis Pin Hole Diameter: 16.5mmMounting Point Distance (Min.): 635mmOverall Length (Min.): 670mmBase Mount Type: Double ClevisWeight: 9.612KgWarranty: Consumable

The Draper Wheel Dollies are expert equality, each fitted with four heavy duty white non-marking castors. The robust steel manufacture enables up to 454kg weight to be carried on each dolly. They are designed to locate underneath vehicle wheels allowing precise and easy movement within confined spaces. Specifications 2 x Draper Expert Wheel Dollies  Max. Weight: 454kg per Dollie Material: Steel  4 x heavy duty castors Non-marking castors Dimensions 600 x 360 x 100mm Colour: Blue