Car Jacks

This professional quality bottle jack has: Capacity (Tonnes): 5 Jack Height (Min-Max): 185-355mm Weight: 4.08kg tough cast iron base with screw in components High quality polished steel ram w more→ith additional screw in/out height adjuster Three piece pumping handle Automatic overload protection

VEVOR Pneumatic Jacks,6600 lbs(3.0Ton) Pneumatic Car Jack with Portable Handle,triple bag jack Thickened Rubber for soft and easy to collapse terrain, water on sand or muddy roads6600lbs Loading Capa more→city5.3"-15.75" Lifting RangeSolid ConstructionEasy OperationEasy to StoreWide ApplicationMin. Height: 135 mm / 5.3 inches,Lifting Time: 5 Sec,Max. Height: 400 mm / 15.75 inches,Gross Weight: 43 lb/19.5 kg,Capacity: 3.0 tons / 6600 lbs,Air Inlet: G1/4,Color: Red,Model: Red Triple Bag Jack,Material: Steel + Rubber,Working Temp: -60℃~ 50℃

Hydraulic jack, for horizontal and vertical use with removable lever, max. load 6 t. Supplied = assembled. Max. load = 6 t. Lifting range with lifting head = 265 - 380 mm. Lifting range with lifting t more→oe = 18 - 133 mm. Lift = 115 mm. Weight = 15 kg. Floor clearance = 18 mm. Product type = hydraulic jacks. Very low weight for mobile use. Lift with head or toe. Removable lever for more flexibility. The two sided hydraulic jack can be used safely when the ground clearance is 18 mm or more. Its precise lowering regulation allows heavy goods to be lowered slowly and in a controlled manner.

Ideal for car and light commercial transmission removal and installation. Features and Benefits Fully adjustable universal rotary saddle with adjustable corner brackets and safety chains, for peace of more→mind Foot operated pump and release valve leaves both hands free to maneuver transmission Wide base with four 3" dia. swivel-type ball bearing castors, providing stability and easy maneuvering Two-stage flash chromed rams inhibit rust from entering the hydraulic system Powerful lifts, from 875 to 1800mm Notes Capacity - 1/2 Tonne Ram Extensions - 2 Minimum Saddle Height - 875mm Maximum Saddle Height - 1800mm Saddle Size - 680x810mm Chain Length - 95mm Saddle Tilt Forward - 24" Saddle Tilt Back …

Universal tool -- this set includes all of the heavy-duty equipment you will need for lifting, pulling, pushing, bending, straightening and spreading Heavy load -- heavy duty and durable metal materi more→al with up to 4 ton capacity Safety -- pump with automatic overload system to prevent damage to the cylinders and equipment Lifting height -- the height of the ram piston rod position can be adjusted between 270 - 390 mm Pipe extensions -- 4 extensions for adjusting the ram height to your needs

Info Governance Engine Up To 10 Devices

Ideal for workshop or roadside use, this jack takes the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead man’s handle which also aids controll more→ed lowering speed. Supplied with extensions that close the gap between the saddle of the jack and the jacking point. See chart for detailed specification.

Features: *100% brand new and high quality *Made of high quality material, durable and practical to use * Labor-saving jack handle,simple design easy to use. *Long lasting and durable constru more→ction,rust resistant. * Perfect for travel use and emergency wheel / tyre changes. *Material: High Carbon Steel *Size: 34cm Package Included: 1 x Car Jack Wrench Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.

Pneumatic Jack - 2 Tonne by Zoro Select

These two Rubber Wheel Chocks ensure that vehicles will not move when being jacked up or parked on an incline.4 Ton Capacity ChocksDimensions (H x L x W): 150 x 195 x 100mmWeight Each: 2.0kg 10 Ton Ca more→pacity ChocksDimensions (H x L x W): 175 x 270 x 115mmWeight Each: 2.9kg Model No:WC01Dimensions (H x L x W):150 x 195 x 100mmWeight Each:2.2kgModel No:WC02Dimensions (H x L x W):175 x 270 x 115mmWeight Each:3.3kg

Heavy-duty, industrial quality, dual purpose toe lift bottle jack. Has a lifting capacity of 10tonne on the toe of the jack and 14tonne on the head. Designed to lift heavy plant or machinery where the more→re is limited ground clearance such as fork lift trucks, machine installation or for use on construction sites. Fitted with a 280 rotating handle to enable jacking in confined spaces.

This trolley jack has a low profile and a long reach for ease of entry. It is equipped with a single piston quick-lift pedal and six pumps to enable it to efficiently fulfil the lifting range of 75-53 more→0mm. It features a T-shaped handle with an integrated dual-action Lowering Control System (LCS) - a lift and twist lowering mechanism that activates with weights in excess of 50kg. It’s fitted with hardwearing nylon wheels for quiet and smooth operation and they also prevent damage to garage floors. There is an integrated rubber saddle pad to prevent damage to the underside of the vehicle and an EVA foam handle cover prevents panel damage. There is a parts tray for convenience. The maximum