Car Jacks

High-density plastic with anti-slip steel bar. Prevents a maximum 30tonne vehicle’s movement when being jacked on a level surface or parked on an incline not exceeding 12°. Steel chock bracket designed to mount to wall or trailer. Features & Benefits: • High-density plastic with anti-slip steel bar. • Prevents a maximum 30 Tonne vehicle’s movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Steel chock bracket designed to mount to wall or trailer. • Chock Dimensions (H x L x W): 225 x 475 x 200mm. • Chock Weight: 1.7kg. • Bracket Weight: 1.36kg. • Model No. CV127 Specifications: Model No CV127 Brand: Sealey Dimensions (W x D x H): 200 x 475 x 225mm Materi…

Heavy-duty steel plate with rust resistant finish. Fitted with four Ø75mm metal castors, two lockable. Each dolly features a side handle for easy carrying. Can handle up to 250mm widths. Suitable for use in bodyshops and workshops. Features & Benefits: • Can handle up to 250mm widths. • Fitted with four Ø75mm metal castors, two lockable. • Heavy-duty steel plate with rust resistant finish. • Each dolly features a side handle for easy carrying. • Suitable for use in bodyshops and workshops. • Model No. WS681

Two welded steel wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for heavy goods vehicles. Features & Benefits: • Two welded steel wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Suitable for heavy goods vehicles. • Model No. WC05

Rubber wheel chocks weighing 8kg (4kg each) prevent vehicle movement when jacking or parking on an incline. Suitable for heavy commercial vehicles and light aircraft. Chocks supplied on rope for easy storage and removal from underneath wheels. Not intended for use on sloped ground over 12º. Features & Benefits: • Two rubber wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12º. • Suitable for light aircraft, or vehicles below 30 Tonne. • Chocks supplied on rope for easy storage and removal from underneath wheels. • Dimensions (W x D x H): 455 x 155 x 140mm. • Model No. WC11

Heavy-duty nylon reinforced rubber wheel chock. Manufactured to be comparable the current DVSA requirements. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Features robust carry handle that can also be fitted with a rope or chain (not included). Suitable for commercial, agricultural and aircraft tyres of diameter Ø1500-1800mm. Suitable for vehicles below 40 Tonne. Features & Benefits: • Heavy-duty nylon reinforced rubber wheel chock. • Manufactured to be comparable the current DVSA requirements. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. • Features robust carry handle that…

Sealey FCR500 Steel Folding Loading Ramps 500kg Capacity Per Pair The Sealey FCR500 are Steel Folding Loading Ramps with a capacity of 500kg per pair. The loading ramps are manufactured from strong, durable powder-coated steel, providing safe and easy ramp access for in-line and multi-axle vehicles. These loading ramps are suitable for loading/unloading motorbikes, quads, ride-on lawnmowers and mini tractors from vans or trailers Features:
- Folding design allows compact storage when not in use
- Manufactured from strong, durable powder-coated steel
- Features a strap and hook to help secure ramps while in use
- Provides safe and easy ramp access for in-line and multi-axle vehicles …

Heavy-duty, cast steel, lever-ratchet operated jack with reversible ratchet mechanism enabling it to be used for lifting or lowering. Versatile and lightweight unit, suitable for pulling tree stumps and tensioning fences as well as a positioning aid for heavy machinery. Upper jaw is adjustable on beam, allowing jack to be used as a clamp. Features & Benefits: • Min./Max. Height: 125/1330mm. • Heavy-duty, cast steel, lever-ratchet operated jack with 1500mm beam. • Reversible ratchet mechanism enables jack to be used for lifting or lowering. • Upper jaw is adjustable on beam, allowing jack to be used as a clamp. • Versatile and lightweight unit, suitable for pulling tree stumps and tensioning…

A pair of extensions for use on car ramps stock No.s 23216 and 23302.

The Draper Wheel Dollies are expert equality, each fitted with four heavy duty white non-marking castors. The robust steel manufacture enables up to 454kg weight to be carried on each dolly. They are designed to locate underneath vehicle wheels allowing precise and easy movement within confined spaces. Specifications 2 x Draper Expert Wheel Dollies  Max. Weight: 454kg per Dollie Material: Steel  4 x heavy duty castors Non-marking castors Dimensions 600 x 360 x 100mm Colour: Blue

Expert Quality, for stabilizing HGVs whilst parked. Manufactured from anti-slip, non-sparking, highly visible weatherproof heavy duty HDPE plastic. Sold loose as single chock. Conforms to DIN 76051-D53Z and complies with ADR regulations Contents: 1 x Wheel Chock for Larger Than 920mm Dia. Wheels

Expert Quality, for semi-permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Contents: 1 x Beam Clamp, 5 Tonne Specifications: Depth (Beam Clamp): 110mm Girder Beam Width: 80-354mm Overall Width (Beam Clamp): 235-490mm Safe Working Load (SWL): 5 tonne Steel Plate Thickness: 10mm

Expert Quality, for semi-permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Contents: 1 x Beam Clamp, 3 Tonne Specifications: Depth (Beam Clamp): 103mm Girder Beam Width: 80-354mm Overall Width (Beam Clamp): 235-490mm Safe Working Load (SWL): 3 tonne Steel Plate Thickness: 8mm

Expert Quality, for semi-permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as a pulling clamp. Test certificate included. Contents: 1 x Beam Clamp, 1 Tonne Specifications: Depth (Beam Clamp): 64mm Girder Beam Width: 75-260mm Overall Width (Beam Clamp): 180-360mm Safe Working Load (SWL): 1 tonne Steel Plate Thickness: 5mm

Screw adjustment with easy-to-use spinner nut and ball-bearing thrust race for smooth operation. Removable base for easier storage. Adjustable over a 668mm range. Features & Benefits: • Screw adjustment with spinner nut. • Ball-bearing thrust race. • Removable base. • Min./Max. Height: 1364/2032mm. • Model No. ES750 Specifications: Model No ES750 Brand: Sealey Capacity: 750kg Maximum Height: 2032mm Minimum Height: 1364mm Nett Weight: 12.78kg

Protective jack handle sleeve, helps prevent accidental damage to car body work when pumping the handle. Made from an EVA material which is oil resistant. Suitable for all jack handles with 30mm diameter.

Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism. Supplied with a short length of chain. Features & Benefits: • Min./Max. Width: 1120/1910mm. • Supports and accurately positions engine. • Ideal for replacing anti-vibration mountings. • Aids the removal of gearboxes and transmissions. • Model No. ES500 Specifications: Model No ES500 Brand: Sealey Capacity: 500kg Maximum Width: 1910mm Minimum Width: 1120mm Nett Weight: 12.9kg Screw Trav…

Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism. Supplied with a short length of chain. Features & Benefits: • Min./Max. Width: 585/1580mm. • Supports and accurately positions engine. • Ideal for replacing anti-vibration mountings. • Aids the removal of gearboxes and transmissions. • Model No. ES300 Specifications: Model No ES300 Brand: Sealey Capacity: 300kg Maximum Width: 1580mm Minimum Width: 585mm Nett Weight: 11.8kg Screw Travel: 23…

Accepts a wide variety of engines and transmissions. The heads swivel 360° for accessibility to all parts of the engine. Fully adjustable mounting arms. Swivel castors provide excellent manoeuvrability. Maximum Load Length: 700mm. Features & Benefits: • Accepts a wide variety of engines and transmissions. • Head swivels through 360°. • Swivel castors. • Fully adjustable mounting arms. • Maximum Load Length: 700mm. • Model No. ES550 Specifications: Model No ES550 Brand: Sealey Capacity: 550kg Nett Weight: 27kg Size (W x D x H): 1000 x 845 x 930mm

Accepts a wide variety of engines and transmissions. The heads swivel 360° for accessibility to all parts of the engine. Fully adjustable mounting arms. Swivel castors provide excellent manoeuvrability. Maximum Load Length: 700mm. Features & Benefits: • Accepts wide variety of engines and transmissions. • Head swivels through 360°. • Swivel castors. • Fully adjustable mounting arms. • Maximum Load Length: 700mm. • Model No. ES450 Specifications: Model No ES450 Brand: Sealey Capacity: 450kg Nett Weight: 19.9kg Size (W x D x H): 950 x 790 x 930mm

Accepts a wide variety of engines and transmissions. The heads swivel 360° for accessibility to all parts of the engine. Fully adjustable mounting arms. Swivel castors provide excellent manoeuvrability. Maximum Load Length: 700mm. Features & Benefits: • Accepts wide variety of engines and transmissions. • Head swivels through 360°. • Swivel castors. • Fully adjustable mounting arms. • Maximum Load Length: 700mm. • Model No. ES350 Specifications: Model No ES350 Brand: Sealey Capacity: 350kg Nett Weight: 19kg Size (W x D x H): 890 x 790 x 920mm

Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using double screw/hook mechanisms. Supplied with two short lengths of chain. Features & Benefits: • 500kg Capacity. • Min./Max. Width: 585/1580mm. • Designed to support and accurately position engines during maintenance operations. • Ideal for supporting the engine whilst replacing anti-vibration mountings and certain body panels. • Aids with the removal of gearboxes and transmissions. • Supplied with two short length…

This engine support beam is designed to position the engine when replacing the engine mounts. It is also suitable for aiding the removal of transmission components and gearboxes. Compatible with most cars and light commercial vehicles. Adjustable outer extension clamps with rubber feet to prevent damage to the paintwork. Supplied with two chains. Contents: 2 x Chains Specifications: Capacity: 500kg Min. width: 730mm Max. width: 1,480mm Adjustable screw height: 0-205mm Overall beam length: 1,500mm Chain quantity: 2 Weight: 17kg

This engine support beam is designed to position the engine when replacing the engine mounts. It is also suitable for aiding the removal of transmission components and gearboxes. Compatible with most cars and light commercial vehicles. Adjustable outer extension clamps with rubber feet to prevent damage to the paintwork. Supplied with one chain. Contents: 1 x Chain Specifications: Capacity: 300kg Min. width: 1,015mm Max. width: 1,380mm Adjustable screw height: 0-305mm Overall beam length: 990mm Chain quantity: 1 Weight: 15kg

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 5m x 90mm, 3 Tonne