Car Jacks

Scissor Jack / Max Load 1.5 t

Strong steel tube 360 front wheels Can be used between 2 buses Equipped with balancer Equipped with industrial FRL Disc seat for multi-position sitting

The Sealey cross beam adaptor is ideal for use with front wheel drive vehicles and is suitable to be used with jacks with a 31 - 33mm saddle spigot pin. This cross beam also provides extra when locating awkward jacking points and the robust manufacture makes this an ideal tool for any workshop or garage.

The SIP 2.5 Ton Aluminium/Steel Low-Profile Trolley Jack uses a Quick-Lift system which raises saddle to the lifting point, safety bypass system to prevent overloading, and a large rubber pad. 2.5 Ton maximum weight capacity 95mm to 470mm lifting height range Extra low-profile design for lower cars Durable aluminium / steel construction Dual pump Quick-Lift system raises the saddle to the vehicle lifting point quickly Safety bypass system protects the jack from potential problems or overloading Extra large saddle with rubber pad 2-piece handle with rubber bumper Heavy-duty wheels and castors

Low profile car jack 2.5T 80-360 mm BEST 10663 ✅ Capacity: 2.5 tons | ✅Low profile: 80mm | ✅ Length: 540 mm I ✅ Height with lowered arm (measured from the plate): 8 cmI ✅ Flooded with hydraulic oil Rating of our customers⭐️⭐️⭐️⭐️⭐️ ⭐️ Features of the lift ✔️ The lift allows you to lift an object weighing up to 2500 kg. ✔️ Perfect for a home garage as well as a professional workshop. ✔️ Perfect for sports cars with low suspension due to the low profile. ✔️Height of the tool with the arm lowered (measured from the plate) is 8 cm ✔️ The lift has wheels, making it more comfortable to use. Rear fixed, front swivel bearings ✔️ The construction of the device is reinforced with brackets, which translate…

The Gojak is the ultimate system for moving vehicles in confined areas, or for removing obstructing vehicles without hassle or keys. Vehicles can be moved quickly, easily and safely without entry. They roll easily in any direction.Easy entryEasy liftEasy movement2 jacks permit a full 180 degree vehicle pivot, 4 jacks will place the vehicle on 360 degree rolling platform. Mechanical leverage applied by the foot pedal progressively "squeezes" the vehicle tyre between the rollers until the tyre lifts smoothly off the ground. The rollers touch only the tyre, no contact with the vehicles frame or undercarriage is necessary. Their low centre of gravity after lifting helps make the Gojak safe and

Hydraulic jack, for horizontal and vertical use, max. load 10 t. Supplied = assembled. Max. load = 10 t. Lifting range with lifting head = 420 - 650 mm. Lifting range with lifting toe = 30 - 260 mm. Lift = 230 mm. Weight = 35 kg. Floor clearance = 26 mm. Product type = hydraulic jacks. Can be used horizontally and vertically, housing rotates 360°. Low maintenance hydraulics with overload valve. Release valve with automatic position return and removable pump lever. The two sided hydraulic jack can be used safely when the ground clearance is 26 mm or more. Its precise lowering regulation allows heavy goods to be lowered slowly and in a controlled manner.

A hydraulic trolley jack with technology that makes lifting simple while its safety bypass system prevents over-loading, ensures safe operation and also prevents damage and user injury. Its equipped with pump piston dust shields and wiper seals that protect the hydraulic system from contaminants. A compact design allows it to easily fit under low vehicles and in confined spaces.

Flat design: Due to the low underrun height of only 85 mm, this trolley jack is ideal for lowered vehicles and sports cars. Stable and light: high-quality and solid design made of durable material for durable and reliable use – ideal for everyday use in workshops, craft businesses or in the home garage. Quick lifting: the robust hydraulic unit with double piston pump ensures quick and effortless lifting of the vehicle. The lifting and lowering can be smoothly and easily regulated. Mobile and reliable: the trolley jack is equipped with 2 fixed and steerable wheels, so it can be easily moved. Thanks to the safety valve and the double seals, this jack reaches a very special safety standard. …

Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. Supplied with 90 rotating pump and telescopic pump handle. Service kit readily available.

The Sip 20 Ton Bottle Jack Offers Powerful Adjustable Lifting Up To 470Mm Via A Serrated Saddle For Secure Contact And 60Mm Screw Extension Plus A Heavy-Duty Cast Iron Build With Safety Valve. • 20 Ton Maximum Weight Capacity • 242Mm To 470Mm Adjustable Lifting Range • 60Mm Screw Extension For Added Versatility • Serrated Saddle For Safe Secure Load Contact • Compact And Lightweight Design Despite The Heavy-Duty Cast Iron Construction And Base • Overload Protection And Safety Valve • Ideal For Workshops And GaragesPTDSIP03660

This professional quality bottle jack has: Capacity (Tonnes): 3 Jack Height (Min-Max): 180-350mm Weight: 3.28kg tough cast iron base with screw in components High quality polished steel ram with additional screw in/out height adjuster. Three piece pumping handle Automatic overload protection

Chassis Stand / Max Load 3 t / 5.2 kg

Spare Parts for Kennedy Bottle Jacks

The WINNTEC® from SIP 10 TON Low-Profile Bottle Jack is perfect for pushing and pressing in garages and workshops, with increased versatility achieved through full horizontal and vertical operation and performance via heavy-duty components. Suitable for automotive and commercial vehicles in garages and workshops. KEY FEATURES 120mm to 260mm lifting height range Low-profile design ideal for performance vehicles 45mm and 6mm screw extensions for high versatility Heavy-duty wide cast iron base spreads weight Designed for horizontal and vertical operation WINNTEC® from SIP 3-Year Warranty

BMW trolley jack rubber pad designed to avert damage to the underside of a BMW when using a trolley jack thus assisting in the prevention of rust on the underside of the vehicle's chassis. Made from durable and robust rubber. The rectangular locating rubber enables the pad to be secured within the unique BMW jacking port. For use with standard chassis trolley jacks with a saddle diameter of over 70mm.PTDDRPDIR41814