Car Jacks

• Two welded steel wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees.• Suitable for heavy goods vehicles.Two welded steel w more→heel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. Suitable for heavy goods vehicles.• Two welded steel wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Suitable for heavy goods vehicles. • Model No. WC05Technical Specification:Dimensions (W x D x H): 200 x 270 x 210mmMaterial: SteelNett Weight: 8.11kgWeight Each: 4kgDimensions: Length: 266mm …

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one en more→d (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• 78-510mm lifting range • Single piston pump for a fast lift, reaching full height in just 2.5 strokes • Low profile design • Integrated rubber saddle pad prevents damage to underside of vehicle • EV more→A foam handle prevents panel damage • Fitted with hardwearing nylon wheels with rear swiveling castors, for quiet and smooth operation. These wheels also prevent damage to garage floors • Safety valve prevents the jack from overloadingThis trolley jack features an extra-fast single lifting pump to ensure it reaches full height in just 2.5 strokes. It has a low profile design making it ideal for vehicles with a reduced clearance height, enabling a lifting range from 78-510mm. There is an integrat…

• All steel construction 4-piece ramp extension kit for Model No. MC680E Motorcycle Lift.• Converts motorcycle lift into a 2000mm x 1260mm 680kg mini tractor/quad bike or ATV lift.• Consists of two li more→ft table extensions and two additional loading ramps.• Fitted with automatic anti-roll off devices.All steel construction 4-piece ramp extension kit for Model No. MC680E Motorcycle Lift. The kit consists of two lift table extensions and two additional loading ramps. This converts motorcycle lift into a 2000mm x 1260mm 680kg mini tractor/quad bike or ATV lift. Fitted with automatic anti-roll off devices.• All steel construction 4-piece ramp extension kit for Model No. MC680E Motorcycle Lift. • Co…

Weight-for-weight, this strap is three to five times stronger than chain and has the advantage that overload can be detected early by the fraying of the strap. Manufactured from 100% high strength pol more→yester with reinforced lifting eyes. Colour-coded according to European standards for identifying capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capacity: 1000kg • …

Expert Quality, for semi - permanent attachment to steel RSJ's to act as lifting point for chain blocks, hoists and lifting tackle. Can also be used for the lifting and transfer of steel beams and as more→a pulling clamp. Test certificate included. Carton packed.

Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. Profiled lifting arm allows low clearance height of just 85mm making this unit suitable for sp more→orts and custom cars. Fitted with heavy-duty one-piece hydraulic unit with pump-through action preventing handle locking at maximum ram extension. White saddle aids positioning under vehicle and safety valve prevents overloading. Features & Benefits: • Min./Max. Saddle Height: 85/385mm, allowing low entry. • Chassis Length: 563mm. • Heavy-duty chassis with strengthening flanges along the top edge for extra torsional rigidity under load. • Profiled lifting arm allows low clearance height of just …

• Manufactured from strong durable yet lightweight aluminium.• Provides safe and easy ramp access for a variety of small vehicles.• Suitable for loading/unloading quad bikes, ride-on lawnmowers or any more→other four wheeled vehicle up to a maximum of 680kg.• Features extended claws at one end to help secure ramp when in use.• Folding design for compact storage.• Folded Dimensions (L x W x H): 1160 x 290 x 150mm.• Extended Dimensions (L x W x H): 2324 x 290 x 110mm.Manufactured from strong durable yet lightweight aluminium. Provides safe and easy ramp access for a variety of small vehicles. Suitable for loading/unloading quad bikes, ride-on lawnmowers or any other four wheeled vehicle up to a maximu…

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of lim more→ited clearance. High quality welded chain with safety latches on the load hooks.