Car Jacks

• Lifts and stabilizes any dual swing arm motorbike quickly and easily.• Fitted with width and angle adjustable rubber support pads.• Rubber supports mounted on heavy-duty box section for continuous professional use.• Bobbin Supports available as an optional extra - Model No. RPS1BS.• Delivered in knock-down form to reduce freight costs, some self-assembly required.• Min./Max. Width: 220-350mm.Technical SpecificationNett Weight: 4.3kgMinimum/Maximum Width: 220-350mmTechnical Specification:Minimum Width: 220mm Maximum Width: 350mmDimensions: Length: 110mm x Height: 470mmWeight: 4.8KgWarranty: 1 year

• Min./Max. Height: 205/750mm.• Platform (W x L): 333 x 2060mm.• All steel construction with foot operated, integral hydraulic pump and ram assembly.• Fitted with platform safety lock device to prevent accidental lowering.• Bike fixed by front wheel clamp.• Four eyelets allow tie downs to be used for added stability.• Fitted with a full width loading ramp.• 500mm Removable rear panel to assist with rear wheel removal.• Can be stored in an upright position to save space when not in use.• This item is heavy. Extra assistance must be provided at the delivery point to help its safe delivery.All steel construction with foot operated, integral hydraulic pump and ram assembly. Fitted with platform safety…

• Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels.• Also used as an aid for the removal of gearboxes and transmissions.• Beams supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism.• Supplied with a short length of chain.Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using a screw/hook mechanism. Supplied with a short length o…

Unitec 10929 Scissor Jack 1000 kg
Lifting capacity up to 1000kg
Hub Height 95mm - 325mm
Crank
Execution 1,0 Tons Of

Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams. When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge. In position, and when the beam is under load, the bearings retract, to leave the flat of the arm, to stabilise the lift.Features & Benefits:• Flat arm with spring loaded roller bearings for use with SJBEX3000S and SJBEX4000S Jacking Beams.• When unloaded these arms support the weight of the beam, allowing for it to run smoothly along the pit edge.• In position, and when the beam is under load, the bearings retract to leave the flat of the arm to stabilise the lift.• Model No. SJBEX.A01Speci…

• Heavy-duty 5 Tonne high level support stand.• Safely supports vehicles when wheel free operations are being carried out.• Independently UK load tested. • Sturdy welded steel construction for superior safety and strength.• Three types of large interchangeable crutches for good load distribution.• Supplied with captive pin load support.• Fitted with retracting castors for easy manoeuvrability.• Suitable for commercial and public service vehicles.• Sold as singles, but MUST be used in pairs, or multiples of.Heavy-duty high level stand to safely support vehicles when wheel free operations are being carried out. Independently UK load tested. Supplied with three interchangeable crutches for even …

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Expert Quality, polyester webbing, 50mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 1000kg for a load at one end (straight configuration) and 2000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are softer than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 3 tonne x 2 metre

• Sturdy yet lightweight wheel chocks weigh around 250g each.• Prevents car, caravan, or light aircraft moving when jacking or parked on an incline.• Supplied on 800mm sturdy rope for easy storage and removal from underneath wheels.• Not intended for use on sloped ground over 10°.Sturdy yet lightweight wheel chocks weigh around 250g each. Prevents car, caravan, or light aircraft moving when jacking or parked on an incline. Supplied on 800mm sturdy rope for easy storage and removal from underneath wheels. Not intended for use on sloped ground over 10°.• Sturdy yet lightweight wheel chocks weigh around 250g each. • Prevents car, caravan, or light aircraft moving when jacking or parked on…

• Steel frame designed for supporting and moving partly dismantled or badly damaged vehicles around the workshop or bodyshop.• Sliding castor brackets adjust for width and rubber-faced support pads adjust for height.• Fitted with four ø150mm nylon castors.• Max. Width: 1485mm.• Min./Max. Height: 300/390mm.Steel frame designed for supporting and moving partly dismantled or badly damaged vehicles around the workshop or bodyshop. Sliding castor brackets adjust for width and rubber-faced support pads adjust for height.• Steel frame designed for supporting and moving partly dismantled or badly damaged vehicles around the workshop or bodyshop. • Sliding castor brackets adjust for width and rubb…