Car Jacks

Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle. Features & Benefits: • Min./Max. Height: 231/441mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2-piece handle. • Model No. PBJ15S Specifications: Model No PBJ15S Brand: Viking Capacity: 15 Tonne Hydraulic Lift: 150mm Maximum Height: 441mm Minimum Height: 231mm Nett Weight: 7.15kg Screw Extension: 60mm

Fitted with safety overload valve and manufactured in the EU. All steel, one-piece base, reservoir and pump cylinder design gives added strength. Fully serviceable ram piston with extension screw. All models supplied with 90 rotating pump and telescopic pump handle. Fitted with moulded carry handle incorporating storage for the pump handle. Service kit readily available.

Scissor action jack suitable for automotive, industrial and agricultural applications. Ideal for vehicles with low ground clearance. 4 Tonne Front scissor nose capacity with minimum height of 65mm allows use under forklifts. 5 Tonne Cylinder cap capacity with minimum height of 416mm suits agricultural and other vehicles with high set jacking points. Features & Benefits: • Scissor action jack suitable for automotive, industrial and agricultural applications. • Ideal for vehicles with low ground clearance. • 4 Tonne Front scissor nose capacity with minimum height of 65mm allows use with forklifts. • 5 Tonne Cylinder cap capacity with minimum height of 416mm suits agricultural and other vehicles…

Three stage pneumatic jack
Extra low profile, 125mm entry height
Long chassis, 2210mm reach
Slow Down valve
Draper 3 year warranty

This trolley jack features an extra-fast single lifting pump to ensure it reaches full height in just 2.5 strokes. It has a low profile design making it ideal for vehicles with a reduced clearance height, enabling a lifting range from 78-510mm. There is an integrated rubber saddle pad to prevent damage to the underside of the vehicle when in operation. Fitted with hardwearing nylon wheels with rear swiveling castors, for quiet and smooth operation. These wheels also prevent damage to garage floors. There is a safety valve to prevent the jack from overloading. Manufactured to EN1494 SpecificationContents:1 x Draper Expert Professional Low Profile Fast Lift Garage Trolley Jack, 3 Tonne, GreenSpecifications:Capacity: …

Compact and easy-to-use to raise a vehicle either manually or with an electric drill of 90Nm or more (do not use an impact wrench as this will damage the mechanism). During raising it can be stopped at any height before locking the vehicle level. Once raised it can be tilted forwards or backwards to allow much greater access to underside of car (always use suitably rated axle stands before getting under a vehicle). Three adjustable width settings (775mm/1130mm/1530mm) allow narrow chassis cars to be lifted, such as MGs and other small classic cars. Even with modern wider cars, this style of lift allows easy-access to sills and edges of vehicle that some lifts would obscure. Features & Benefits: …

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 Contents: 1 x Wide Load Sling, 4m x 90mm, 3 Tonne

Features a handle and wheels for use in the garage, workshop or mobile mechanics. Lightweight with a low entry height of 135mm lifting to a maximum of 450mm in only 25 seconds. Robust high resistant diaphragm for durability. Internal, military gauge steel, telescopic interlocking core, overload safety valve and air vacuum valve for rapid lowering. Suitable for use in high risk environments such as mining or the petroleum industries. Features & Benefits: • Min./Max. Height: 135/450mm. • Air Consumption: 10.5cfm. • Lightweight and portable with 667mm handle and two composite wheels for manoeuvrability. • Can be stored vertically to save space. • Robust high resistant diaphragm for durability. • Interna…