Car Jacks

• Increases the stability of the motorcycle by clamping the bottom and front of the tyre.• Features a pivot clamp which locks the front wheel securely by the motorcycle weight.• Suitable for fitting o more→n trailers, in vans or to motorcycle lifts (requires suitable fixings).• Fully adjustable to fit wheels ø13"-21"(380-535mm).• Minimum/Maximum Tyre Width: 50-130mm.• Please note: Motorcycle must also be secured using tie down straps.• Fittings not supplied.Increases the stability of the motorcycle by clamping the bottom and front of the tyre. Features a pivot clamp which locks the front wheel securely by the motorcycle weight. Suitable for fitting on trailers, in vans or to motorcycle lifts (require…

• Weight-for-weight, this strap is three to five times stronger than chain and has the advantage that overload can be detected early by the fraying of the strap.• Manufactured from 100% high strength more→polyester with reinforced lifting eyes.• Colour-coded according to European standards for identifying capacity.• Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (straight configuration).Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded accordin…

A pair of extensions for use on car ramps stock No.s 23216 and 23302.

Twin-piston, quick lift facility - just five pumps to reach maximum height
Lifting range 88-358mm
Integrated rubber saddle pad prevents damage to underside of vehicle
EVA foam han more→dle to prevent panel damage
Knurled handle for extra grip
Twin safety overload valves
Rear swivelling castors
Manufactured to EN 1494 Specification
Draper 12 months parts and labour warranty

• Replacement hydraulic ram for PH30 engine crane.Replacement hydraulic ram for PH30 engine crane.• Replacement hydraulic ram for PH30 engine crane. • Model No. PH30.01Technical Specification:Nett Wei more→ght: 14.7kgRam Capacity: 1200kgRam Diameter: 38.05mmRam Travel: 494mmPump Type: Single SpeedRam Pin Hole Diameter: 22.2mmClevis Pin Hole Diameter: 21.4mmMounting Point Distance (Min): 650mmOverall Length (Min): 690mmBase mount Type: Double ClevisDimensions: Length: 180mm x Height: 140mmWeight: 15.8KgWarranty: Consumable

Expert Quality, polyester webbing, 150mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 5000kg for a load at one e more→nd (straight configuration) and 10,000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• SPACE SAVING - Saves floor/cabinet space by enabling axle stands to be mounted securely to a wall.• 2 AND 3 TONNE - Suitable for Sealey axle stands like the VS2002, VS2003 and AS3 ranges as well as more→most other brands of axle stands.• HEAVY DUTY FIXINGS - Supplied with fasteners to mount to a wall.• SECURE - Axle stands are held firm horizontally by hooking onto cross brace, without the risk of falling.Technical SpecificationNett Weight: 2kg

• Optional Bobbin Support for Model No. RPS2.• Designed to give extra support and added stability once rear axle has been located and raised.• Yellow phosphate finish for added corrosion resistance.Op more→tional Bobbin Support for Model No. RPS2. Designed to give extra support and added stability once rear axle has been located and raised. Yellow phosphate finish for added corrosion resistance.• Optional Bobbin Support for Model No. RPS2. • Designed to give extra support and added stability once rear axle has been located and raised. • Yellow phosphate finish for added corrosion resistance. • Model No. RPS1BSTechnical Specification:Length: 105mmNett Weight: 0.34kgQuantity: 2Dimensions: Length: 115mm …

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one en more→d (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

Texspan round slings are manufactured from 100% polyester. The sling is made up with a seamless outer polyester cover and a core produced from a continuous hank of high-tenacity polyester. They are so more→fter than duplex slings and kinder to delicate surfaces. BS EN1492: 2000 compliant. NB Length quoted are for the effective working length, which is half the circumference of the sling . A full range of effective working lengths is also available from 0.5m to 6m and strength ratings in excess of 2 tonnes up to a maximum of 6 tonnes. Working Load Limit: 2 tonne x 3 metre

• Manufactured from strong, durable powder coated steel.• Provides safe and easy ramp access for in-line and multi axle vehicles.• Suitable for loading/unloading motorbikes, quads, ride-on lawn mower more→and mini tractors from vans or trailers.• Features a chain and hook to help secure ramps while in use.• Folding design allows compact storage when not in use.• Folded Dimensions (L x W x H): 890 x 230 x 150mm.• Extended Dimensions (L x W x H): 2000 x 230 x 50mm.• Maximum load 250kg single ramp or 500kg per pair.Manufactured from strong, durable powder coated steel. Provides safe and easy ramp access for in-line and multi axle vehicles. Suitable for loading/unloading motorbikes, quads, ride-on lawnmow…