Car Jacks

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…

• Steel construction car ramp extensions to decrease ascent angle.• Ideal for cars with low ground clearance.• Attaches to standard car ramps with a minimum width of 195mm.• Suitable for use with Model No. CAR2000.Steel construction car ramp extensions to decrease ascent angle. Ideal for sports cars and vehicles with low ground clearance. Attaches to standard car ramps with a minimum width of 195mm. Suitable for use with Model No. CAR2000.• Steel construction car ramp extensions to decrease ascent angle. • Ideal for cars with low ground clearance. • Attaches to standard car ramps with a minimum width of 195mm. • Suitable for use with Model No. CAR2000. • Length: 630mm. • Capacity: 400kg Each…

Perfect for garage use, or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the car ramps to be stood upright for convenient, space saving storage. For low ground clearance vehicles, an extension is available for purchase separately (part number: RM1). Specifications: • Capacity per Pair: 2000kg • Length: 790mm • Car Ramp Height: 250mm • …

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 7.5mm. Size ø104mm. Fits saddle ø93-95mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 7.5mm. • Size: ø104mm. • Fits saddle ø93-95mm. • Model No. JP09Technical Specification:Nett Weight: 0.05kgJack Pad Size: ø104mmStyle: Type BProfile Depth: 7.5mmTo Fit Saddle Size: ø93-95mmWeight: 0.05kgDimensions: Length: 20mm x Height: 280mmWeight: 0.074KgWarranty: Consumable

Single-piece hydraulic unit with heavy base design. Integral cog-type release mechanism and long 2-piece handle. Protective jack handle sleeve helps prevent accidental damage to car bodywork when pumping the handle. Heavy-duty castors and extra-large saddle design ease positioning under vehicle. Fitted with safety overload valve and pump-through valve to prevent handle locking at maximum ram extension. Ideal for loaded vans up to 3.5 Tonne GVW. Features & Benefits: • Min./Max. Saddle Height: 130/520mm. • Chassis Length: 659mm. • Integral cog-type release mechanism and long 2-piece handle. • Heavy-duty swivel castors and extra-large saddle design ease positioning under vehicle. • Fitted with safet…

• Lifts and stabilizes any dual swing arm motorbike quickly and easily.• Fitted with width and angle adjustable rubber support pads.• Rubber supports mounted on heavy-duty box section for continuous professional use.• Bobbin Supports available as an optional extra - Model No. RPS1BS.• Delivered in knock-down form to reduce freight costs, some self-assembly required.• Min./Max. Width: 220-350mm.Technical SpecificationNett Weight: 4.3kgMinimum/Maximum Width: 220-350mmTechnical Specification:Minimum Width: 220mm Maximum Width: 350mmDimensions: Length: 110mm x Height: 470mmWeight: 4.8KgWarranty: 1 year

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Pair of chocks to prevent vehicles moving whilst working with trolley jacks, scissor jacks, bottle jacks, axle stands or on a slope. Display carton.

Twin-piston, quick lift facility - just five pumps to reach maximum height
Lifting range 88-358mm
Integrated rubber saddle pad prevents damage to underside of vehicle
EVA foam handle to prevent panel damage
Knurled handle for extra grip
Twin safety overload valves
Rear swivelling castors
Manufactured to EN 1494 Specification
Draper 12 months parts and labour warranty