Car Jacks

Weight-for-weight, this straps is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capac…

Made from heavy-duty moulded plastic for extra grip
Integrated handle for ease of use
Suitable for cars, light commercial vehicles, caravans and trailers
Draper 12 months parts and labour warranty

Base and reservoir machine welded for increased strength and reduced chance of leakage. Fitted with overload valve. Supplied with 2pc handle. Features & Benefits: • Min./Max. Height: 222/447mm. • Fitted with overload valve. • Base and reservoir machine welded. • Supplied with 2pc handle. • Model No. SJ8 Specifications: Model No SJ8 Brand: Sealey Capacity: 8 Tonne Hydraulic Lift: 145mm Maximum Height: 447mm Minimum Height: 222mm Nett Weight: 4.8kg Screw Extension: 80mm

• Steel construction car ramp extensions to decrease ascent angle.• Ideal for cars with low ground clearance.• Attaches to standard car ramps with a minimum width of 195mm.• Suitable for use with Model No. CAR2000.Steel construction car ramp extensions to decrease ascent angle. Ideal for sports cars and vehicles with low ground clearance. Attaches to standard car ramps with a minimum width of 195mm. Suitable for use with Model No. CAR2000.• Steel construction car ramp extensions to decrease ascent angle. • Ideal for cars with low ground clearance. • Attaches to standard car ramps with a minimum width of 195mm. • Suitable for use with Model No. CAR2000. • Length: 630mm. • Capacity: 400kg Each…

Features & Benefits: • Jack Stands ideally suited to the professional trade workshop!• Manufactured from heavy duty steel• Pin type for added safety and strength• Pin wire strap secured to stand to prevent loss• Deep saddle for positive location under vehicle• Adjustable Height• Conforms to international standards CEMaterial: Heavy Duty SteelStandard: CECapacity: 1350kgMinimum Height: 255mmMaximum Height: 370mmLift Height: 110mmSaddle Diameter: 18 x 50 x 62mmBase Area: 195 x 180mm

• Use to manoeuvre motorcycles (maximum 300kg vehicle weight) with centre-stands.• Perfect for places where space is restrictive.• The dolly is made from 4mm thick hardened steel-plate.• Covered with anti-slip rubber pad.• Foot/hand operated built-in brake mechanism.• Ideal for workshop, showroom and home garage use.This motorcycle moving dolly can be used to manoeuvre motorcycles (maximum 300kg vehicle weight) with centre-stands and is perfect for places where space is restrictive. The centre-stand locates on the 4mm thick hardened steel-plate and the 360 degree castors allow the bike to be moved in any direction. Features a foot/hand operated built-in brake mechanism which is ideal for workshop…

Expert Quality, polyester webbing, 50mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 1000kg for a load at one end (straight configuration) and 2000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type A design.• Fits over the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type A. Profile Depth 31.7mm. Size ø157mm. Fits saddle ø138-142mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type A. • Profile Depth: 31.7mm. • Size: ø157mm. • Fits saddle ø138-142mm. • Model No. JP07Technical Specification:Nett Weight: 0.13kgJack Pad Size: ø157mmStyle: Type AProfile Depth: 31.7mmTo Fit Saddle Size: ø138-142mmWeight: 0.13kgDimensions: Length: 20mm x Height: 280mmWeight: 0.4KgWarranty: Consumable

Bottle jack, with hydraulic unit, max. load 5 t. Supplied = assembled. Max. load = 5 t. Lifting range with lifting head = 195 - 380 mm. Lift = 125 mm. Weight = 3.3 kg. Piston diameter = 27 mm. Base plate length = 105 mm. Base plate width = 100 mm. Additional height when unwound = 60 mm. Overall height from - to = 195 - 380 mm mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can …

• Fitted with overload valve. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 2-piece handle.• 3 Year guarantee*.Technical SpecificationCapacity: 10 TonneHydraulic Lift: 150mmMaximum Height: 461mmMinimum Height: 231mmNett Weight: 5.9kgScrew Extension: 80mmTechnical Specification:Capacity: 10 Tonne Hydraulic Lift: 150mm Maximum Height: 461mm Minimum Height: 231mmDimensions: Length: 133mm x Height: 243mmWeight: 6.02KgWarranty: 3 years

Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one end (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.