Effects Pedals

The Strymon Zuma Mounting Kit is the perfect solution for affixing your power supply in a discreet manner. It keeps your Zuma high current PSU stored underneath your PedalTrain board leaving more space for creative pedals up top! Please note: The Zuma Mounting Kit is not compatible with older model Pedaltrain boards (PT-1 PT-2 PT-JR) with holes on the rear brace instead of an open pass through for the length of the board. For those boards we recommend affixing Zuma to your board with Dual-Lock®.

Power Suply: Input: 100-240V ~ 50-60Hz / Output: 9V, 1.3APolarity: Center NegativeCompatible with DigiTech Whammy Pedal I, Whammy Pedal II, Whammy 4, Whammy 5, VHM5, MV5, GNX 1, VX 400, Vocalist Workstation, Vocalist Access, Vocalist VR, Vocalist Live 2, Vocalist Live 4, RP 3, S100, S400, RP 100 / 150 / 200 / 250 / 300 / 350, 500, RPx 400, Vocal 300, BP 200, Genesis 1, Jam Man Looper, Jam Man SoloXT Looper, Jam, Man Express XT Looper, Jam Man Stereo Looper, iStomp – 2,1 x 5,5 mm Barrel connector, negative center.
Type: Power Supply
Voltage: 9V
Made in: China
Polarity: Center Minus
Plug Type: Barrel
Current (mA): 1300.0

The Behringer UO300 Ultra Octaver Pedal gives you that extra cutting edge to your sound by adding up to two additional tones to your guitar. Offering notes that are either one to two octaves lower than the original sound packing in that extra punch. You can also adjust all three tones at any moment with intuitive and individual volume controls for each one which accompanies a switch that offers brilliant bass performance. With a performer friendly LED status light you can tell if the pedal is active wherever you are on stage.

Durable single piano-style footswitch pedal with natural feeling that is compatible with Yamaha, Roland, Kawai and Akai products. Its metal body is covered with thick black urethane bumper, and the long-frame design large rubberized footprint and substantial weight prevents sliding on most surfaces. 1.8 m long cable with 6.3 mm mono phone plug is included. Black and white colour combination.
Type: Sustain Pedal
Made in: China
Compatible with: Kawai;Yamaha;Roland;Akai
Type-A Connector: Jack MONO 6,3 mm Male
Colour: Black
Original Colour by Producer: Black;Black
Polarity Switch: No

D’Addario XPND Pedal Risers are designed to elevate pedals in those “tough to stomp” places. Mont the risers using the included hook and loop strips and raise any pedal a full inch, making it easy to access. You can align multiple risers across your board as needed, and with built-in-cut-outs for simple cable routing, adding risers is quick and hassle-free. XPND Pedal Risers are built to last and are available in single or double width, to accommodate dual-sized or multiple pedals.
Made in: Vietnam
Size: L
Material: Aluminium
Colour: Black
Variant: Large

The power supply 1 SPOT you can use anywhere in the world without a voltage converter because it automatically converts voltage worldwide. No need to worry about AC hum interfering with your sound either. the 1 SPOT is one of the quietest power sources. It is the 9V DC adapter that only takes up one spot on your power strip. With the ability to handle up to 1700mA, the 1 SPOT can power your entire pedalboard.
Plug Type: Barrel
Type: Adapter
Colour: Black
Current (mA): 1700.0
Power Supply: 9V;Adapter
Variant: 1 SPOT
Polarity: Center Minus
Voltage: 9V
Made in: China
Current: 1700 mA
Connector Angle: Straight
ChargerType: Power Supply…

The Behringer CS400 Compression and Sustain Ultimate Dynamics effects pedal is the perfect option for balancing your level. Ensuring that your quieter strikes ring with resonance while simultaneously reducing harsh loud tones. With intuitive controls for Level Tone Attack and Sustain you can fully personalise this stompbox tone to maximise its full potential. Utilising an active status LED you will always be able to tell when this pedal is enhancing your dynamics.

A distortion effect pedal. It has dense, tube-like distortion sound with an endless sustain. Its ideal for extreme hard rock or heavy metal sounds. The sound is adjusted using Distortion, Level potentiometers and a 3-band equalizer. In addition, it is equipped with a blue status LED, foot switch and ¼'' In/Out connectors. The effect is powered by a 9 V battery or adapter (not included).
Battery Operation: Yes
Type: Overdrive;Distortion
Made in: China
UK/EU Power supply included: No

Approved 12V DC/1000mA power supply with negative centre that is compatible with TC Electronic stompbox pedals.
Voltage: 12V
Made in: China
Power Supply: 240V
Current (mA): 1000.0
Polarity: Center Minus
UK/EU Power supply included: No
Number of Outputs: 1
Current: 701-1000 mA
ChargerType: Power Supply
Plug Type: Barrel

Stylish, lightweight, and durable, the CB-GT1 bag is the perfect solution for transporting the GT-1 Guitar Effects Processor and essential accessories. The rugged exterior and thick internal padding shield your gear from bumps and bruises, while a convenient shoulder strap and reinforced handle make carrying easy.
Original Colour by Producer: Black;Black
Handle: Yes
Colour: Black
Strap: Yes;Shoulder Strap
Waterproof: Yes
Padding: Yes
Type: Pedal Bag
Made in: Vietnam

Custom moulded in the UK to fit the contours of the Strymon Nightsky & Volante. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Strymon Nightsky & Volante.
Made in: United Kingdom
Compatible with: Strymon Nightsky / Volante
Type: Dust Cover

Custom moulded in the UK to fit the contours of the Headrush Mx5. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Headrush Mx5.
Compatible with: Headrush Mx5
Type: Dust Cover
Made in: United Kingdom

Compact and portable 3-button footswitch pedal for use with several DigiTech products, including The Jimi Hendrix Experience, The JamMan, or Expression Factory. Pedal provides increased functionality and convenient Hands-free control over up/down selection of Models, Mode changes, Loop selection, automatic Start/Stops, and auto record where applicable. It is equipped with durable metal chassis construction, one 1/4" input and 3 m stereo TRS cable.
Number of Buttons: 3
Type: Footswitch
Battery Operation: No
Power Supply: Passive
Colour: Black

The Behringer TU300 Chromatic Tuner is a necessity for any modern performer. Keeping your instrument at the correct tuning is essential to any performer and this makes that job a whole lot easier. Featuring a seven-segment LED indicator you can select between seven different tuning modes and an eleven-point stream meter can ensure the utmost precision at any moment. Whether you are on stage or in the studio this is the perfect companion for you.

The TC Helicon Singles Connect Kit is a cable set for connecting up to four vocal effects pedals together. With minimal cable clutter and simple usage the Singles Connect Kit is an essential audio and power accessory kit for the VoiceTone Single pedals. Including a 12V/1A power supply DC interconnect/daisy-chaining cables and three short XLR cables the Singles Connect Kit opens up a wide range of options for connecting your effects.

The JHS Pedals Red Remote External Switch is an expansion unit for use in conjunction with other JHD effects pedals. The Red Remote allows you to remotely activate the on-board toggle functions on the pedal itself. You can connect the remote with a standard 1/4 instrument cable expanding your tonal options and added an extra layer of versatility to your performance.

A case style gig bag, ideally suited for the Pedal Baby 100. This tough vinyl gig bag is zippered on three sides and comes with a shoulder strap. There’s a separate space for pedals and cables along with a zipped pocket on top so you can fit your entire rig in a case smaller than a laptop bag. Padding has been added to the inside to provide extra support for your valuable gear.
Original Colour by Producer: Black;Black
Colour: Black
Made in: United Kingdom
Type: Soft Case

Get louder, get quieter, or get modulated with the outstanding FOOT CONTROLLER FCV100. This versatile pedal works equally well as a volume or modulation pedal – without tying up your hands or slowing down your performance.The FCV100 can accommodate two mono or one stereo instrument via its dual 1,4" Input jacks. By switching into Norm mode, the FCV100 is capable of controlling the volume of two individual instruments. In CV mode the FCV100 can control modulation and volume levels of other musical instruments by connecting Output 2 to the volume or modulation input of the instrument. In CV mode, when Output 2 is in use, Input/Output 1 can still be used for controlling the volume of another …

Digital multi-effects pedal comparable to state-of-the-art studio processors that features 24-bit/40 kHz high-resolution stereo effects including Chorus, Flanger, Phaser, Delay, Tremolo and Pitch Shifter. It also provides dedicated Level control plus 2 additional parameter controls for adjustment of delay time, flanger rate etc., a status LED indicator for effect on/off and battery check, and a first-class electronic on/off switch that maintains incredible signal integrity in bypass mode. Pedal can be powered by either a 9 V battery or DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: ca 330 g.
UK/EU Power supply included: No
Battery Type: 9V
Made in: China
Battery Operation: …

Shopping for a British distortion pedal? Try the NU-X Brownie! The Classical British rock tones of the 1970’s, packed into one little box. How it works? By using a hybrid of circuits, we created truly unique pre-amp and power tube distortion characteristics. You’ll be amazed to hear the warm, organic tone that’s reproduced. Brownie has a specially designed BJT input stage causing it to “break-up” when the preamp tube starts to distort. It also has an asymmetrical clipping circuit letting you simulate some of the characteristics of an actual tube amplifier. It also keeps the bottom-end tight by processing bass frequencies which can get muddy when distorted. NU-X Brownie uses a low-pass t…

Reissue series high gain distortion pedal for guitar or bass. The Recto Distortion simulates a hard driven US voiced tube amplifier with a tight bass response for heavy metal and grunge guitar styles. All analogue circuitry ensures a pure signal path and 2-band EQ helps to tailor the frequency response as needed. Powerful tones for heavy riff and barre chord driven rock. Features: Pure analog amplifier simulation True bypass hardware switching Gain, Master & 2-band EQ controls Specifications: Battery: 9V PP3 (supplied) Power supply: Optional 9Vdc 300mA regulated (not supplied) Controls: Gain, Master, Bass, Treble & foot switch Input impedance: 1M Ohms Output impedance: 10k Ohms Dimensions: …

Reissue series drive pedal for guitar or bass. The XTC OD simulates the red channel of a highly regarded boutique tube amplifier, which produces a thick and harmonically rich distortion effect for classic rock styles. All analog circuitry ensures a pure signal path and a "T" tone control enables adjustment of high frequency content as required. A full range of classic rock tones on tap from a single pedal.. Features: Pure analogue amplifier simulation True bypass hardware switching Volume, Gain & Tone controls Specifications: Battery: 9V PP3 (supplied) Power supply: Optional 9Vdc 300mA regulated (not supplied) Controls: V (volume), G (gain), T (tone) & foot switch Input impedance: 1M Ohms …

Genuine Tube-like sound that makes it more than your average Screamer pedal! If you’re not playing through a real tube amp, cranked for overdrive, it’s difficult to get genuine tube overdrive sound. Using a FET Transistor System, which already has overdrive and distortion capabilities is a better approach to maintain the genuine sound you get from an actual analog tube amp. A FET allows you to bring out the harmonic attributes, and break-up the distortion into a finer grit, the way a real tube does. Now, your leads will sing richer and longer, and your rhythm will be more open and expressive than ever before. It all culminates into an overdrive that is superbly dynamic, with crisp precise clar…

Reissue series drive pedal for guitar or bass. The Steel Singer Drive simulates a high end boutique tube amplifier, delivering a transparent mild to medium driven gain, much revered by many famous guitar players. All analog circuitry ensures a pure signal path and a filter control provides a single intuitive EQ adjustment. Subtle gain to smoothly overdriven tones for blues, pop and rock styles. Features: Pure analogue amplifier simulation True bypass hardware switching Volume, Gain & Filter controls Specifications: Battery: 9V PP3 (supplied) Power supply: Optional 9Vdc 300mA regulated (not supplied) Controls: Volume, Gain, Filter & foot switch Input impedance: 1M Ohms Output impedance: 10k …