Car Jacks

Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 8.2mm. Size Ø104mm. Fits saddle Ø98-105mm. Features & Benefits: • Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 8.2mm. • Size: Ø104mm. • Fits saddle Ø98-105mm. • Model No. JP15 Specifications: Model No JP15 Brand: Sealey Nett Weight: 0.074kg Jack Pad Size: Ø104mm Style: Type B Profile Depth: 8.2mm To Fit Saddle Size: Ø98-105mm Weight: 0.074kg

Fully certified and approved to comply with MOT requirements. Features 2-stage mechanical safety lock and telescopic finger guards to prevent accidental injury. Supplied with two pairs of aluminium support blocks. Beam has spring loaded flat arms with roller bearings - when unloaded, these support the weight of the beam, allowing the entire unit to run smoothly along the pit or ramp, but when loaded locate the unit firmly. Optional hook arms supplied. Wide lift configuration meets MOT recommendation for lifting on jacking point.

Expert Quality, polyester webbing, 50mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 1000kg for a load at one end (straight configuration) and 2000kg for a load between the loop eyes ('U' configuration). Manufactured to BS EN1492 1+A1 Contents: 1 x Load Sling Wide, 3m x 50mm, 1 Tonne

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 6 metre

Steel chassis with PVC rollers and four Ø100mm nylon castors. Pedal operated hydraulic lifting action with safety locking pin when under load. Rollers cradle vehicle’s tyre and are capable of handling up to 270mm profiles. Suitable for bodyshops, garages, showrooms or anywhere an immobile vehicle needs moving on an even surface. Note: Skates sold as singles, but must be used in pairs. Features & Benefits: • Steel chassis with PVC rollers and four Ø100mm nylon castors. • Capacity: 650kg. • Maximum Opening: 550mm. • Maximum Tyre Width: 270mm. • Weight: 17kg. • Note: Sold as singles, but must be used in pairs. • Model No. WS650

Ratchet type axle stands, with cast iron support posts. Auto Rise feature operated by pulling the lever, allowing gas assisted crutch to rise automatically until it meets the axle or chassis of the vehicle. Angled teeth in posts prevent accidental release of load - the more weight applied, the tighter the post is locked. Full width crutch for safe support of load. Manufactured to rigorous safety standards. Sold in pairs.

Three stage pneumatic jack
Extra low profile, 125mm entry height
Long chassis, 2210mm reach
Slow Down valve
Draper 3 year warranty

Scissor Jack / Max Load 1.5 t / 2.5 kg

Rubber Saddle Pad

Suitable for changing wheels and tyres on large vehicles. 8-Position adjustable roller width ranging from 440-780mm, giving greater flexibility. Load arms incorporate smooth roller action sleeves allowing wheel to be rotated for lining up on studs. Foot operated hydraulic mechanism with dead man's control release. Mounted on two rear locking castors and two front castors for stability and easy manoeuvrability. Supplied with safety chain. Features & Benefits: • Suitable for changing wheels and tyres on large vehicles. • Min./Max. Lifting Height: 50/640mm. • 8-Position adjustable roller width ranging from 440-780mm. • Load arms incorporate smooth roller action sleeves allowing wheel to be rotat…