Car Jacks

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 7.7mm. Size ø91.5mm. Fits saddle ø90-95mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 7.7mm. • Size: ø91.5mm. • Fits saddle ø90-95mm. • Model No. JP12Technical Specification:Nett Weight: 0.055kgJack Pad Size: ø91.5mmStyle: Type BProfile Depth: 7.7mmTo Fit Saddle Size: ø90-95mmWeight: 0.055kgDimensions: Length: 10mm x Height: 190mmWeight: 0.06KgWarranty: Consumable

• Approved to EU and UK Lifting Gear Regulations.• This hoist is intended for use where a suitable support facility exists.• Support brackets are included with the equipment.• The support bar is not included.Approved to EU and UK Lifting Gear Regulations. This hoist is intended for use where a suitable support facility exists. Support brackets are included with the equipment. The support bar is not included.• Approved to EU and UK Lifting Gear Regulations. • This hoist is intended for use where a suitable support facility exists. • Support brackets are included with the equipment. • Maximum Capacity (Double Cable): 400kg. • The support bar is not included. • Model No. PH400Technical Specification:Capaci…

Bottle jack, with hydraulic unit, max. load 15 t. Supplied = assembled. Max. load = 15 t. Lifting range with lifting head = 225 - 425 mm. Lift = 140 mm. Weight = 7.7 kg. Piston diameter = 48 mm. Base plate length = 135 mm. Base plate width = 142 mm. Additional height when unwound = 60 mm. Overall height from - to = 225 - 425 mm mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can …

• Fitted with overload valve. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 2-piece handle.• 3 Year guarantee*.Technical SpecificationCapacity: 20 TonneHydraulic Lift: 150mmMaximum Height: 453mmMinimum Height: 243mmNett Weight: 9kgScrew Extension: 60mmTechnical Specification:Capacity: 20 Tonne Hydraulic Lift: 150mm Maximum Height: 453mmDimensions: Length: 170mm x Height: 265mmWeight: 9.855KgWarranty: 3 years

• Designed to support and accurately position engines during maintenance operations such as replacing anti-vibration mountings and certain body panels.• Also used as an aid for the removal of gearboxes and transmissions.• Beams supported on rubber feet and fine adjustment control is obtained by using double screw/hook mechanisms.• Supplied with two short lengths of chain.Supports and accurately positions engine during maintenance operations such as replacing anti-vibration mountings and certain body panels. Also used as an aid for the removal of gearboxes and transmissions. Beam supported on rubber feet and fine adjustment control is obtained by using double screw/hook mechanisms. Supplied with two…

Expert Quality, polyester webbing, 120mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 4000kg for a load at one end (straight configuration) and 8000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

• 78-510mm lifting range • Single piston pump for a fast lift, reaching full height in just 2.5 strokes • Low profile design • Integrated rubber saddle pad prevents damage to underside of vehicle • EVA foam handle prevents panel damage • Fitted with hardwearing nylon wheels with rear swiveling castors, for quiet and smooth operation. These wheels also prevent damage to garage floors • Safety valve prevents the jack from overloadingThis trolley jack features an extra-fast single lifting pump to ensure it reaches full height in just 2.5 strokes. It has a low profile design making it ideal for vehicles with a reduced clearance height, enabling a lifting range from 78-510mm. There is an integrat…

• Suitable for supporting large multi-cylinder engines (maximum weight 75kg).• The supports can rotate for accessibility to all parts of the engine.• Width, height and length adjustable.• Capacity: 75kg.Suitable for supporting large multi-cylinder engines (maximum weight 75kg). Features fully adjustable mounting arms and swivel castors. Supports can rotate for accessibility to all parts of the engine.• Suitable for supporting large multi-cylinder engines (maximum weight 75kg). • The supports can swivel for accessibility to all parts of the engine. • Width, height and length adjustable. • Capacity: 75kg. • Model No. MES02Technical Specification:Capacity: 75kgEngine Support Span: 130-370mmHeight: M…

• Suitable for use with our lever hoists or chain blocks.• Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways.• Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.• Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load…

• Designed to prevent damage to the vehicle's frame rails/pinch weld seams whilst jacking up the vehicle.• The saddle's surface protects and prevents damage.• Made from robust and durable rubber.Technical SpecificationNett Weight: 0.18kgDiameter: ø75mmHeight: 35mmSlot: W:10mm x D:15mmTechnical Specification:Diameter: 75mm Height: 35mmDimensions: Length: 130mm x Height: 35mmWeight: 0.2KgWarranty: 1 year