Car Jacks

Type:Rubber Pad Material:Rubber Features:Durable, Cross Slotted, Car Accessories Size:12.5 x 2.5cm/4.92" x 0.98" (Approx.) Groove Size:1cm x 0.8cm/0.39" x 0.31" (Approx.) Description: Brand New & High quality. This universal rubber pad is used to protect the undercarriage metal jack point railing that is on most vehicles.Durable and resistant to damage, it will keep the chassis rails from getting pinched, bent and broken.Soft enough to not harm your vehicles metal yet rigid enough to support it.Great for DIY vehicle maintenance.Fits most floor jacks and lifts. Pls Note: 1.Please allow 0.1-0.3cm differences due to manual measurement, thanks. 2.As shown, all products are made under natural

Scan Engine Mini 1d 3.3 V Decoded Class 2 Note: Image is for illustrative purposes only and may differ from the actual product

The JCB-TH33007 is a robust and durable double-pump hydraulic trolley jack designed to offer a maximum lifting capacity of up to 3 tonnes in weight.Constructed with a high quality and heavy-duty steel frame, the JCB-TH33007 is capable of lifting SUVs, cars, light commercial vehicles and any other vehicle which requires high ground clearance up to 465mm in height.Thanks to its double-piston design, the JCB-TH33007 is a quick-lift trolley jack, which will save you precious time and effort in comparison to a single-piston counterpart.The JCB-TH33007 is also equipped with swivel rear wheels and a saddle to provide smooth manoeuvring and positioning of the jack, while its integrated protection rubber …

This Draper 2 tonne Low Profile Trolley Jack gives you a low profile trolley jack with a twin piston 'quick lift' facility that provides extra lift for every pump of the handle. The excellent, low 70mm entry height makes this jack particularly suitable for reduced clearance vehicles such as sports cars. A fast lowering two-piece twist handle is fitted with a foam bumper preventing possible panel damage when being pumped. An extra large cushioned saddle is provided for easier location under vehicles.

Jacking points on for BMWs commonly get damaged due to the wrong jack pad stand being used when lifting the vehicle. Leave ugly jacking points. Chopped up and inverted. So we made this rubber jacking pad. Our pads are made out of solid rubber from one mould to ensure the utmost safety when lifting the vehicle. Features: Effectively avoid being damaged during lifting by jack. Made by professional manufacturer, quality assurance. Special design for BMW. Fitment: For MINI R50, R52, R23, R55, R56, R57, R58, R59, R60, R61 (2001-Present Coupe, Convertible, Hatch, Clubman, Clubvan) For BMW 1-series E81, E82, E87, E88, 1M, F20, F21 For BMW 2-series F22, F23 For BMW 3-series E46, E90, E91, E92,

Fitted with overload valve. Base and reservoir machine welded for increased strength and reduced chance of leakage. Threaded pump assembly allows for easy disassembly and maintenance. Supplied with 4-piece operating handle. Fitted with carrying handle. Service kit readily available.10 Tonne Telescopic Low Profile Bottle Jack• Min./Max. Height: 125/215mm allowing low entry.• Telescopic 2-stage ram for higher maximum lift.• Compact closed height.• Cast base with threaded components.• Supplied with 4-piece operating handle.• Carrying handle.• Model No. BJ10LEModel No: BJ10LE:Brand: Sealey:Capacity: 10 Tonne:Hydraulic Lift: 90mm:Maximum Height: 215mm:Minimum Height: 125mm:Nett

Max Load 10 t / Hubhöhe 390 mm

Heyner Premium OEM scissor jack for Audi Q5 | Lift PRO is design to lift only limited type of vehicles – please see list below – that is why you can be sure it will fit perfectly Car Jack Lift Min. lifting height (mm) – 100mm, Max. lifting height (mm) – 385mm. Jack dimension without storage bag 490mm x 130mm x 130mm. Weight – 3.9 kg Min. lifting height (mm) – 100mm, Max. lifting height (mm) – 385mm. Jack dimension without storage bag 490mm x 130mm x 130mm. Weight – 3.9 kg OEM: 8R0 011 031 K BN3 Will fit: Audi Q5 2008-Onwards OEM Car Jack made by HEYNER Germany - leading German manufacturer of high-quality garage tools and car accessories

High quality, ultra-strong bottle jack - designed for effortless lifting. Can be used vertically or angled to 3 degrees from a vertical position. Features and Benefits Features a wide, rugged base that provides excellent stability and strength Provides peace of mind - all critical stress points on the jacks are reinforced for added durability and dependability Cast iron bases with a steel cylinder housing and an adjusting notched saddle Fitted with an overload protection valve Typical Applications Suitable for lifting or positioning vehicles, machinery, houses and/or other building structures but after lifting, loads must be immediately supported by jack stands Standards Met Complies with the …

Professional quality bottle jack with a telescopic two stage hydraulic ram provides a much greater maximum while maintaining a low minimum height level.- 5 Tonne Capacity- Height range - mm : 220-495- Heavy duty machine welded base for increased stability and reliability- 3 piece pumping handle- Complies with latest European standardsPTDCLA7621037

All steel construction compact heavy duty unit with lifting range 135-340mm. Portable and easy to operate with swivel castors. Built in pump overload prevents over loading for safe operation with hydraulic bypass system to stop ram over travel. Product size: 470 x 200 x 140mm, weight 8.5kg, packaged in colour box.

The WINNTEC® from SIP 1.35 TON Aluminium Racing Trolley Jack is manufactured from u Litrea lightweight all-aluminium and nylon wheels to ensure a lightweight and compact nature that makes it perfect for a variety of on-the-go applications. Designed for automotive garages, workshops, and mobile applications. KEY FEATURES 80mm to 375mm lifting height range Lightweight and all-aluminium construction Non-marking nylon wheels help prevent damage Side handles for portability and positioning Universal joint single pump for easy lifting WINNTEC® from SIP 3-Year Warranty

Note: Image is for illustrative purposes only and may differ from the actual product

Fitted with overload valve. Base and reservoir machine welded for increased strength and eliminates leakage. Supplied with 2-piece handle.12 Tonne Bottle Jack• Min./Max. Height: 231/441mm.• Fitted with overload valve.• Base and reservoir machine welded. • Supplied with 2-piece handle.• 3 Year guarantee*.• Model No. PBJ12SModel No: PBJ12S:Brand: Viking:Capacity: 12 Tonne:Hydraulic Lift: 150mm:Maximum Height: 441mm:Minimum Height: 231mm:Nett Weight: 6.4kg:Screw Extension: 60mm:PTDSEAPBJ12S

VEVOR Motorcycle Jack, Hydraulic Motorcycle Scissor Jack with 300LBS Load Capacity, Portable Lift Table, Adjustable Motorcycle Lift Jack, Red Motorcycle Lift Stand with Fastening StrapsStable StructureEasy to UseNon-Slip PlateSafe Locking BarFastening StrapWide ApplicationLift Mechanism: Hydraulic,Panel Size: 42x35 cm (16.54"x14.17"),Working Height Range: 35-87 cm (13.78"-34.25"),Color: Red,Lift Capacity: 300 lb,Package Size: 46x39x37 cm (18.11"x15.35"x14.57")