Car Jacks

Note: Image is for illustrative purposes only and may differ from the actual product

This professional quality bottle jack has: Capacity (Tonnes): 5 Jack Height (Min-Max): 185-355mm Weight: 4.08kg tough cast iron base with screw in components High quality polished steel ram with additional screw in/out height adjuster Three piece pumping handle Automatic overload protection

VEVOR Pneumatic Jacks,6600 lbs(3.0Ton) Pneumatic Car Jack with Portable Handle,triple bag jack Thickened Rubber for soft and easy to collapse terrain, water on sand or muddy roads6600lbs Loading Capacity5.3"-15.75" Lifting RangeSolid ConstructionEasy OperationEasy to StoreWide ApplicationMin. Height: 135 mm / 5.3 inches,Lifting Time: 5 Sec,Max. Height: 400 mm / 15.75 inches,Gross Weight: 43 lb/19.5 kg,Capacity: 3.0 tons / 6600 lbs,Air Inlet: G1/4,Color: Red,Model: Red Triple Bag Jack,Material: Steel + Rubber,Working Temp: -60℃~ 50℃

Hydraulic jack, for horizontal and vertical use with removable lever, max. load 6 t. Supplied = assembled. Max. load = 6 t. Lifting range with lifting head = 265 - 380 mm. Lifting range with lifting toe = 18 - 133 mm. Lift = 115 mm. Weight = 15 kg. Floor clearance = 18 mm. Product type = hydraulic jacks. Very low weight for mobile use. Lift with head or toe. Removable lever for more flexibility. The two sided hydraulic jack can be used safely when the ground clearance is 18 mm or more. Its precise lowering regulation allows heavy goods to be lowered slowly and in a controlled manner.

Strong steel chassis provides stability when under load. Fixed direction castors and swivel castors for easier positioning under vehicles. Long reach single piece pump handle with comfort rubber for rapid raising and lowering. Safety overload protection valve prevents overload damage to hydraulic mechanism. Integral carry handle. GS and TUV approved. T238 Type: with case. Dimensions: 525 x 225 x 145mm. Maximum load: 2,000kg. Minimum height: 130mm. Maximum height: 380mm. T2.249 Type: with case. Dimensions: 695 x 344 x 180mm. Maximum load: 2,250kg. Minimum height: 145mm. Maximum height: 495mm. T280 Type: long reach. Dimensions: 1150 x 360 x 210mm. Maximum load: 2,000kg. Minimum height: 140mm. …

Universal tool -- this set includes all of the heavy-duty equipment you will need for lifting, pulling, pushing, bending, straightening and spreading Heavy load -- heavy duty and durable metal material with up to 4 ton capacity Safety -- pump with automatic overload system to prevent damage to the cylinders and equipment Lifting height -- the height of the ram piston rod position can be adjusted between 270 - 390 mm Pipe extensions -- 4 extensions for adjusting the ram height to your needs

Info Governance Engine Up To 10 Devices

Ideal for workshop or roadside use, this jack takes the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead man’s handle which also aids controlled lowering speed. Supplied with extensions that close the gap between the saddle of the jack and the jacking point. See chart for detailed specification.

Features: *100% brand new and high quality *Made of high quality material, durable and practical to use * Labor-saving jack handle,simple design easy to use. *Long lasting and durable construction,rust resistant. * Perfect for travel use and emergency wheel / tyre changes. *Material: High Carbon Steel *Size: 34cm Package Included: 1 x Car Jack Wrench Note: 1. The real color of the item may be slightly different from the pictures shown on website caused by many factors such as brightness of your monitor and light brightness. 2. Please allow slight manual measurement deviation for the data.

Note: Image is for illustrative purposes only and may differ from the actual product

These two Rubber Wheel Chocks ensure that vehicles will not move when being jacked up or parked on an incline.4 Ton Capacity ChocksDimensions (H x L x W): 150 x 195 x 100mmWeight Each: 2.0kg 10 Ton Capacity ChocksDimensions (H x L x W): 175 x 270 x 115mmWeight Each: 2.9kg Model No:WC01Dimensions (H x L x W):150 x 195 x 100mmWeight Each:2.2kgModel No:WC02Dimensions (H x L x W):175 x 270 x 115mmWeight Each:3.3kg

Heavy-duty, industrial quality, dual purpose toe lift bottle jack. Has a lifting capacity of 10tonne on the toe of the jack and 14tonne on the head. Designed to lift heavy plant or machinery where there is limited ground clearance such as fork lift trucks, machine installation or for use on construction sites. Fitted with a 280 rotating handle to enable jacking in confined spaces.

The Sealey cross beam adaptor is ideal for use with front wheel drive vehicles and is suitable to be used with jacks with a 31 - 33mm saddle spigot pin. This cross beam also provides extra when locating awkward jacking points and the robust manufacture makes this an ideal tool for any workshop or garage.

Made primarily for the motor racing enthusiast this jack weighs in at just 17.6kg. Utilises many weight saving techniques such as a skeletal lift arm. Features Rocket Lift by use of twin pistons bringing saddle to maximum height in minimal pumps. Polyurethane wheels for smooth and quiet manoeuvring which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast lightweight pick-up.1.8 Tonne Aluminium Low Profile Trolley Jack with Rocket Lift• Min./Max. Saddle Height: 85/425mm allowing low entry.• Chassis Length: 637mm.• Made primarily for the motor racing enthusiast this jack weighs in at just 17.6kg.• Utilises many