Car Jacks

• Steel chassis with PVC rollers and four ø100mm nylon castors.• Pedal operated hydraulic lifting action with safety locking pin when under load.• Rollers cradle vehicle’s tyre and are capable of handling up to 270mm in width.• Suitable for bodyshops, garages, showrooms or anywhere an immobile vehicle needs moving on an even surface.• Capacity: 650kg.• Maximum Opening: 550mm.• Maximum Tyre Profile: 270mm.• Weight: 17kg.• Note: Skates sold as singles, but must be used in pairs.Steel chassis with PVC rollers and four ø100mm nylon castors. Pedal operated hydraulic lifting action with safety locking pin when under load. Rollers cradle vehicle’s tyre and are capable of handling up to 270m…

Weight-for-weight, this strap is three to five times stronger than chain and has the advantage that overload can be detected early by the fraying of the strap. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capacity: 1000kg • …

Polished aluminium with steel pocket clip. Designed for pinpoint lubrication to small and awkward areas. 40mm length applicator needle with brass flow control button for fine control. Display packed.

• Adjustable outer extension clamps with rubber feet • Designed to position the engine when replacing the engine mounts. Also suitable for aiding the removal of transmission components and gearboxes • Compatible with most cars and light commercial vehicles • Supplied with two chainsThis engine support beam is designed to position the engine when replacing the engine mounts. It is also suitable for aiding the removal of transmission components and gearboxes. Compatible with most cars and light commercial vehicles. Adjustable outer extension clamps with rubber feet to prevent damage to the paintwork. Supplied with two chains. 2 x ChainsTechnical SpecificationAdjustable screw height: 0-205mm Capacity…

• Manufactured from strong, durable powder coated steel.• Provides safe and easy ramp access for in-line and multi axle vehicles.• Suitable for loading/unloading motorbikes, quads, ride-on lawn mower and mini tractors from vans or trailers.• Features a chain and hook to help secure ramps while in use.• Folding design allows compact storage when not in use.• Folded Dimensions (L x W x H): 890 x 230 x 150mm.• Extended Dimensions (L x W x H): 2000 x 230 x 50mm.• Maximum load 250kg single ramp or 500kg per pair.Manufactured from strong, durable powder coated steel. Provides safe and easy ramp access for in-line and multi axle vehicles. Suitable for loading/unloading motorbikes, quads, ride-on lawnmow…

• Suitable for use with our lever hoists or chain blocks.• Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways.• Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.Suitable for use with our lever hoists or chain blocks. Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. Incorporates wheel guards to prevent contact with other trolleys mounted on same load bearer.• Suitable for use with our lever hoists or chain blocks. • Designed for mounting onto an I-beam or RSJ to allow load to be manoeuvred sideways. • Incorporates wheel guards to prevent contact with other trolleys mounted on same load…

Expert Quality, enables easy changing or moving of large wheels with deep tread tyres used on tractors or HGVs. Fitted with six adjustable and lockable rollers (3 each side) allowing for easy turning of large wheels. The jacking handle and hydraulic foot pedal enables safe single person operation. Capable of carrying 1500kg wheels and lifting them between 0 - 770mm. Fitted with four heavy - duty castors for improved stability and easy manoeuvrability. Designed for use on agricultural and commercial wheels and tyres.

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 15mm. Size ø94.5mm. Fits saddle ø95mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 15mm. • Size: ø94.5mm. • Fits saddle ø95mm. • Model No. JP13Technical Specification:Nett Weight: 0.09kgJack Pad Size: ø94.5mmStyle: Type CProfile Depth: 15mmTo Fit Saddle Size: ø95mmWeight: 0.17kgDimensions: Length: 15mm x Height: 190mmWeight: 0.1KgWarranty: Consumable

Heavy-duty, cast steel, lever-ratchet operated jack with reversible ratchet mechanism enabling it to be used for lifting or lowering. Versatile and lightweight unit, suitable for pulling tree stumps and tensioning fences as well as a positioning aid for heavy machinery. Upper jaw is adjustable on beam, allowing jack to be used as a clamp. Features & Benefits: • Min./Max. Height: 125/1330mm. • Heavy-duty, cast steel, lever-ratchet operated jack with 1500mm beam. • Reversible ratchet mechanism enables jack to be used for lifting or lowering. • Upper jaw is adjustable on beam, allowing jack to be used as a clamp. • Versatile and lightweight unit, suitable for pulling tree stumps and tensioning…

Expert Quality, polyester webbing, 60mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 2000kg for a load at one end (straight configuration) and 4000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.