Car Jacks

The Sealey cross beam adaptor is ideal for use with front wheel drive vehicles and is suitable to be used with jacks with a 31 - 33mm saddle spigot pin. This cross beam also provides extra when locating awkward jacking points and the robust manufacture makes this an ideal tool for any workshop or garage.

Made primarily for the motor racing enthusiast this jack weighs in at just 17.6kg. Utilises many weight saving techniques such as a skeletal lift arm. Features Rocket Lift by use of twin pistons bringing saddle to maximum height in minimal pumps. Polyurethane wheels for smooth and quiet manoeuvring which also limits damage to garage floors. Lifting bars are fitted either side of the anodised aluminium chassis enabling fast lightweight pick-up.1.8 Tonne Aluminium Low Profile Trolley Jack with Rocket Lift• Min./Max. Saddle Height: 85/425mm allowing low entry.• Chassis Length: 637mm.• Made primarily for the motor racing enthusiast this jack weighs in at just 17.6kg.• Utilises many

Bottle jack, with hydraulic unit, max. load 12 t, 4+ items. Supplied = assembled. Max. load = 12 t. Lifting range with lifting head = 215 - 400 mm. Lift = 125 mm. Weight = 6.7 kg. Overall height from - to = 215 - 400 mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can also be unscrewed by means of a thread. The bottle jack is a reliable tool in the workshop and as a vehicle

Qualitative Materials：Constructed of heavy-duty steel, the meticulously crafted oil cylinder can reduce seal ring wear and improve service life. High wear resistance, high strength Professional Design: Flex head features a permanently molded rubber pad, interlocked to prevent separation. The oil that anti freezing in winter and high temperature resistant in summer, is suitable for a wider range of regions Safety Protection: The pump has an automatic overload system that if overloaded, it will automatically start to prevent damage to rams and equipment Sturdy Blow-Molded Carrying Case：Equipped with a blow molded suitcase, all components can be stored in a planned manner. It can also be

Note: Image is for illustrative purposes only and may differ from the actual product

Rubber Pad For Bottle Jack | Jack Saddle Protector Rubber Pad is available in S, M , L sizes Undercarriage Guard Pad For Car Jack Safe Lifting Rubber Pad For Lifting Jack Brand: alca Germany S size for alca bottle jack 2 ton (431000), 2 ton (431020), 3 ton (431100), 3 ton (431130), 5 ton (432000), 5 ton (432050). M size for alca bottle jack 8 ton (432200), 10 ton (432210), 12 ton (433000), HEYNER bottle jack 5 ton(346050). L size for alca bottle jack 15 ton (433150), 20 ton (4333000), HEYNER bottle jack 10 ton (346100) 10 ton (346110)

Spacious - with total dimensions of 60 x 90 x 202 cm. Two shelves. A storage grille and pull-out storage rails with tension straps Load capacity - supports a total load up to 220 kg Mobile – thanks to four PU steering wheels with two brakes and modular construction Efficient - creates more order and saves paths in any body workshop

Hydraulic jack, for horizontal and vertical use with removable lever, max. load 6 t. Supplied = assembled. Max. load = 6 t. Lifting range with lifting head = 265 - 380 mm. Lifting range with lifting toe = 18 - 133 mm. Lift = 115 mm. Weight = 15 kg. Floor clearance = 18 mm. Product type = hydraulic jacks. Very low weight for mobile use. Lift with head or toe. Removable lever for more flexibility. The two sided hydraulic jack can be used safely when the ground clearance is 18 mm or more. Its precise lowering regulation allows heavy goods to be lowered slowly and in a controlled manner.

Strong steel chassis provides stability when under load. Fixed direction castors and swivel castors for easier positioning under vehicles. Long reach single piece pump handle with comfort rubber for rapid raising and lowering. Safety overload protection valve prevents overload damage to hydraulic mechanism. Integral carry handle. GS and TUV approved. T238 Type: with case. Dimensions: 525 x 225 x 145mm. Maximum load: 2,000kg. Minimum height: 130mm. Maximum height: 380mm. T2.249 Type: with case. Dimensions: 695 x 344 x 180mm. Maximum load: 2,250kg. Minimum height: 145mm. Maximum height: 495mm. T280 Type: long reach. Dimensions: 1150 x 360 x 210mm. Maximum load: 2,000kg. Minimum height: 140mm. …

Car Scissor Jack / Lift Jack With Ratchet For easy use Quick Car Lift Jack| Car Jack available Sizes: 1 ton, 1.5 ton & 2 tons. Suitable for car lift in home or garage Floor Car jack Suitable for Car, Van, SUV Car scissor jack with ratchet is a lightweight and compact tool suitable for emergency and breakdown- easy to store in a car's trunk or under a seat Portable Lift Jack is designed for safely lift a car for maintenance or tire changes Necessary tool for car lifting and tyre change Speed ratchet - to enable you to make the lifting process easy and quick Quality Car Lift Scissor Jack for all type of cars Brand: alca Germany

The WINNTEC® from SIP 10 TON Low-Profile Bottle Jack is perfect for pushing and pressing in garages and workshops, with increased versatility achieved through full horizontal and vertical operation and performance via heavy-duty components. Suitable for automotive and commercial vehicles in garages and workshops. KEY FEATURES 120mm to 260mm lifting height range Low-profile design ideal for performance vehicles 45mm and 6mm screw extensions for high versatility Heavy-duty wide cast iron base spreads weight Designed for horizontal and vertical operation WINNTEC® from SIP 3-Year Warranty

This durable 3 Tonne jack is specifically designed for the professional garage or workshop and features a super-strong chassis with heavy duty wheels & castors and a wide footprint for stability.- Lifting Capacity: 3 Tonnes- Extra strong long 2 piece handle- Saddle height: Min 136mm. Max 465mm- Dimensions (LWH): 572 x 328 x 175mm- Weight: 28.3PTDCLA7623032

Chain, long, without bolt, for machine jacks. Supplied = assembled. Category = lifting equipment. Product type = mounting materials. Material = metal.

Trolley Jack / Max Load 3 t / Hubhöhe 400 mm / 17.4 kg / Cushions

Note: Image is for illustrative purposes only and may differ from the actual product