Car Jacks

• Made from durable polypropylene.• These ramps are designed to allow jacking access to suitable jacking points on the vehicle.• Not intended to raise a vehicle enough for under vehicle servicing.Made from durable polypropylene. These ramps are designed to allow jacking access to suitable jacking points on the vehicle. Not intended to raise a vehicle enough for under vehicle servicing.• 3tonne Capacity per pair. • Made from durable polypropylene. • These ramps are designed to allow jacking access to suitable jacking points on the vehicle. • Not intended to raise a vehicle enough for under vehicle servicing. • Overall Dimensions (L x W x H): 700 x 200 x 80mm. • Model No. CAR3000LRTechnical Specification:Capa…

• Two composite wheel chocks.• Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°.• Suitable for cars not exceeding 2 tonne gross weight.Two composite wheel chocks. Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12°. Suitable for cars not exceeding 2 tonne gross weight.• Two composite wheel chocks. • Prevents vehicle movement when being jacked on a level surface or parked on an incline not exceeding 12 degrees. • Suitable for cars not exceeding 2tonne gross weight. • Model No. WC09Technical Specification:Dimensions (W x D x H): 80 x 185 x 100mmMaterial: CompositeNett Weight: 0.44kg…

Expert Quality, polyester webbing, 90mm wide, with reinforced lifting eyes. Colour coded to European standards to identify capacity. The safe working load (SWL) is rated at 3000kg for a load at one end (straight configuration) and 6000kg for a load between the loop eyes ('U' configuration). Shrink wrapped for security. Display packed.

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 3 tonne x 2 metre

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

• Fitted with overload valve. • Base and reservoir machine welded for increased strength and eliminates leakage. • Supplied with 2-piece handle.• 3 Year guarantee*.Technical SpecificationCapacity: 2 TonneHydraulic Lift: 100mmMaximum Height: 316mmMinimum Height: 168mmNett Weight: 2.2kgScrew Extension: 48mmTechnical Specification:Capacity: 2 Tonne Hydraulic Lift: 100mm Maximum Height: 316mmDimensions: Length: 105mm x Height: 185mmWeight: 2.4KgWarranty: 3 years

Faithfull Lifting Slings are made from 100% PES polyester duplex webbing that is lightweight but extremely durable for use on awkward loads, offering a soft alternative to wires and chains. All sizes can be used in straight pull, basket or choke configurations. Fitted with a reinforced, sleeved lifting eye. Meets the requirements of EN 1492 Part 1:2000. Minimum breaking load is 7 times the Working Load Limit.The Faithfull Yellow Lifting Sling has the following specifications: Max. Load: 3 Tonne.Width: 90mm.Length: 3m.Additional Information:• Length: 3.0m• Type: Lifting Sling• Load Capacity: 3000kg• Breaking Strength: 3000kg

Specifications:Ports & interfaces: - Connector 1 : QD- Connector 2 : 3.5 mm- Connector 1 form factor: Straight- Connector 2 form factor: StraightSustainability- Sustainability certificates: CEPackaging data: - Package width: 135 mm- Package depth: 5 mm- Package height: 200 mm- Package weight: 40 g

• Optional Bobbin Support for Model No. RPS2.• Designed to give extra support and added stability once rear axle has been located and raised.• Yellow phosphate finish for added corrosion resistance.Optional Bobbin Support for Model No. RPS2. Designed to give extra support and added stability once rear axle has been located and raised. Yellow phosphate finish for added corrosion resistance.• Optional Bobbin Support for Model No. RPS2. • Designed to give extra support and added stability once rear axle has been located and raised. • Yellow phosphate finish for added corrosion resistance. • Model No. RPS1BSTechnical Specification:Length: 105mmNett Weight: 0.34kgQuantity: 2Dimensions: Length: 115mm …

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type B design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type B. Profile Depth 14.5mm. Size ø95mm. Fits saddle ø95-97mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type B. • Profile Depth: 14.5mm. • Size: ø95mm. • Fits saddle ø95-97mm. • Model No. JP14Technical Specification:Nett Weight: 0.15kgJack Pad Size: ø95mmStyle: Type BProfile Depth: 14.5mmTo Fit Saddle Size: ø95-97mmWeight: 0.15kgDimensions: Length: 20mm x Height: 190mmWeight: 0.15KgWarranty: Consumable

BMW trolley jack rubber pad, designed to avert damage to the underside of a BMW when using a trolley jack, thus assisting in the prevention of rust on the underside of the vehicle's chassis. Made from durable and robust rubber. The rectangular locating rubber enables the pad to be secured within the unique BMW jacking port. For use with standard chassis trolley jacks with a saddle diameter of over 70mm.