Car Jacks

Ideal for workshop or roadside use, this jack takes the effort out of lifting heavy plant, tractors and commercial vehicles. For extra safety, features dead man’s handle which also aids controlled lowering speed. Supplied with 45/75mm extensions that close the gap between the saddle of the jack and the jacking point. See chart for detailed specification. Features & Benefits: • Min./Max. Height: 130/409mm. • Powerful and reliable. • Lifts heavy plant, tractors and commercial vehicles. • Extensions: 45, 75mm. • Maximum Capacity: 40 Tonne. • Long reach, low entry. • 3 Year Guarantee*. • Model No. YAJ10-40LELR

• Manufactured from 3.5mm steel section.• Suitable for professional or serious DIY applications.• Corrosion resistant finish.• Ramps stack together and will stand upright for easy storage.• BS Approved.Manufactured from 3.5mm steel section. Suitable for professional or serious DIY applications. Corrosion resistant finish. Ramps stack together and will stand upright for easy storage. BS Approved.• 2tonne Capacity per pair. • Manufactured from 3.5mm steel section. • Ramps coated with corrosion resistant finish. • Ramps stack together and will stand upright for easy storage. • Maximum Tyre Width: 200mm. • BS Approved. • Model No. CAR2000Technical Specification:Capacity Pair: 2000kgMaximum Tyre Width…

Perfect for garage use or for the home motor enthusiast, these durably constructed car ramps can be used together to lift vehicles of 2000kg or less to provide access for maintenance purposes. They can also be used to gain the clearance needed to insert a bottle jack. The solid frames of the car ramps are fitted with rungs to prevent slippage of the wheel after the car has been raised, & an extended rear face allows the ramps to be stood upright for convenient, space saving storage. For ease of use, and especially when working with low ground clearance vehicles like sports cars and custom builds, this set is also supplied with a matching pair of removable car ramp extensions. These fit onto …

• Suitable for supporting large multi-cylinder engines (maximum weight 75kg).• The supports can rotate for accessibility to all parts of the engine.• Width, height and length adjustable.• Capacity: 75kg.Suitable for supporting large multi-cylinder engines (maximum weight 75kg). Features fully adjustable mounting arms and swivel castors. Supports can rotate for accessibility to all parts of the engine.• Suitable for supporting large multi-cylinder engines (maximum weight 75kg). • The supports can swivel for accessibility to all parts of the engine. • Width, height and length adjustable. • Capacity: 75kg. • Model No. MES02Technical Specification:Capacity: 75kgEngine Support Span: 130-370mmHeight: M…

• Suitable for heavy engines including 6-cylinder variants.• Supports engine during maintenance operations including engine mounting replacement.• Beam is supported on two rubber covered feet with third, height-adjustable foot, resting on the front of the vehicle.• Supplied with two short lengths of chain.Suitable for heavy engines including 6-cylinder variants. Supports engine during maintenance operations including engine mounting replacement. Beam is supported on two rubber covered feet with third, height-adjustable foot, resting on the front of the vehicle. Supplied with two short lengths of chain.• Suitable for heavy engines including 6-cylinder variants. • Supports engine during engine mount…

Bottle jack, with hydraulic unit, max. load 12 t. Supplied = assembled. Max. load = 12 t. Lifting range with lifting head = 215 - 400 mm. Lift = 125 mm. Weight = 6.7 kg. Piston diameter = 43 mm. Base plate length = 133 mm. Base plate width = 137 mm. Additional height when unwound = 60 mm. Overall height from - to = 215 - 400 mm mm. Product type = hydraulic jacks. Pressure relief value protects the hydraulic unit from overloading. Large foot plate for extra stability. 2-part lever. The high quality hydraulic cylinder features a large foot plate for increased stability. The pump lever moves easily, and is driven by a 2-part lever with a fitting for the valve control. The saddle is ribbed and can …

• Designed to prevent damage to the underside of the vehicle's jacking point.• Type C design.• Fits inside the jack saddle.Designed to prevent damage to the underside of the vehicle's jacking point. Design Type C. Profile Depth 23.8mm. Size ø108mm. Fits saddle ø106-108mm.• Designed to prevent damage to the underside of the vehicle's jacking point. • Design Type C. • Profile Depth: 23.8mm. • Size: ø108mm. • Fits saddle ø106-108mm. • Model No. JP10Technical Specification:Nett Weight: 0.16kgJack Pad Size: ø108mmStyle: Type CProfile Depth: 23.8mmTo Fit Saddle Size: ø106-108mmWeight: 0.16kgDimensions: Length: 15mm x Height: 190mmWeight: 0.172KgWarranty: Consumable

Weight-for-weight, this strap is three to five times stronger than chains and have the advantage that overload can be detected early by the fraying of the straps. Manufactured from 100% high strength polyester with reinforced lifting eyes. Colour-coded according to European standards for identifying their capacity. Safe working load ratings quoted are for a load between the loop eyes (U configuration) and a load at one end (Straight configuration). Features & Benefits: • Weight-for-weight, this strap is three to five times stronger than chains. • Overload can be detected early by the fraying of the straps. • Manufactured from 100% high strength polyester. • Reinforced lifting eyes. • Capaci…

Texspan duplex slings offer flexibility and ease of handling, they will provide the ideal solution to most of your lifting problems. All slings are colour-coded to indicate WLL (Working Load Limit). All duplex slings are manufactured to the European lifting sling standard, giving a 7:1 safety factor. Each sling is individually numbered for traceability and is supplied with a certificate of conformity.Working Load Limit: 1 tonne x 4 metre