Effects Pedals

D’Addario XPND Pedal Risers are designed to elevate pedals in those “tough to stomp” places. Mont the risers using the included hook and loop strips and raise any pedal a full inch, making it easy to access. You can align multiple risers across your board as needed, and with built-in-cut-outs for simple cable routing, adding risers is quick and hassle-free. XPND Pedal Risers are built to last and are available in single or double width, to accommodate dual-sized or multiple pedals.
Colour: Black
Size: L
Made in: Vietnam
Variant: Large
Material: Aluminium

Stereo chorus guitar effect pedal that features dedicated Level, Tone, Rate and Depth controls for an incredible sound shaping. It also provides a status LED indicator for effect on/off and battery check, and a first-class electronic on/off switch that maintains incredible signal integrity in bypass mode. Pedal can be powered by either a 9 V battery or DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: ca 330 g.
Type: Chorus
Made in: China
Power Supply: Adapter
UK/EU Power supply included: No
Battery Operation: Yes

Distortion effect pedal for electric guitar that pushes distortion to the extreme by producing crushing, bottom-heavy distortion for modern metal and hard rock. It features gain boost circuitry that delivers super-thick and heavy distortion with low-end punch and endless sustain, dedicated Gain Boost, Distortion, Tone, Bottom and Level controls for amazing sound shaping, status LED for effect on/off and battery check, dual output for running the direct and delayed signals to separate rigs, and first-class electronic on/off switch for highest signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Battery Operation: Yes<…

3-mode octaver effect pedal for electric bass guitar that allows for creating a monster sound by adding 2 additional tones using the guitar—1 and 2 octaves below the original tone. Pedal provides dedicated volume controls for all 3 tone types for awesome sound shaping, a flexible 3-mode Range switch that allows ultimate bass performance, a status LED for effect on/off and battery check and a first-class electronic On/Off switch for highest signal integrity in bypass mode. Pedal runs on 9 V battery or the BEHRINGER PSU-SB DC power supply (not included). Dimensions: 54 x 70 x 123 mm. Weight: 330 g.
UK/EU Power supply included: No
Battery Operation: Yes
Power Supply: Adapter
Made in: China
Type: Oc&hellip;

Double pedal booster for 3 effects designed for lifting pedals to the optimum level that can easy to switch between effect pedals located on Pedaltrain pedalboards. This pedal booster has a solid steel frame and can be installed on a pedalboard using velcro or screws, which are accessories.
Made in: China
Original Colour by Producer: Black;Black
Type: Pedalboard
Colour: Black
Zip: Yes
Variant: PB3

A standard in pedal switches, with a medal body for durability. Use as a damper switch or as a control switch for functions such as start/stop. Attached cable.
Made in: Japan

Zuma mounting kit for mounting Zuma power supply to Pedaltrain peadalboards.
Made in: USA
Type: Pedalboard
Original Colour by Producer: Blue;Blue
Colour: Blue
UK/EU Power supply included: No
Power Supply: None

Overdrive effect pedal for guitars that features original 4558 op amps and MA150 distortion diodes, and delivers the classic, authentic vintage vacuum tube-like sound. It provides dedicated Drive, Tone and Level, High/Low and Gain controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
Type: Overdrive
Made in: China
UK/EU Power supply included: No
Battery Operation: Yes

The Decksaver Strymon Nightsky and Volante Cover is a high-quality cover designed to accommodate your electric guitar pedals protecting your equipment while on the move. The custom moulded protective cover is constructed from a highly-durable polycarbonate shell for optimal strength. The cover helps to protect your pedals from dust liquid accidental impact damage and more while on the move. The precision trimmed design of the Decksaver cover allows you to accommodate cables and more so your equipment is always ready to go. With its smoked clear finish the cover allows you to see your controller at all times. Please Note: Pictures are for reference only and the cover does not include the pedal.…

Custom moulded in the UK to fit the contours of the Boss 500 Series. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Boss 500 Series.
Type: Dust Cover
Made in: United Kingdom
Compatible with: Boss 500 Series

Compression/sustain effect pedal for guitar that compress loud and boost low signals without degrading the original sound. Effect provides dedicated Level, Tone, Attack and Sustain controls, blue status LED for effect on/off and battery check and top-quality on/off switch that maintains incredible signal integrity in bypass mode. Powered by a 9 V battery or adapter (not included). Dimensions: 70 x 54 x 123 mm. Weight: 330 g.
UK/EU Power supply included: No
Battery Operation: Yes
Power Supply: Adapter
Made in: China
Type: Sustainer;Compressor

The Behringer UM300 stakes a claim for being the most versatile distortion pedal on the market. The EQ shaping options are a step above most similar units with a sweepable mid boost/cut which allows you to flick back and forth between old school mid-scooped metal tones and much fatter doomier mid-heavy sounds. This is complemented by the astonishing amount of gain this pedal can dish out. Id wager the Ultra Metal has more gain than any player needs but feel free to put this to the test. Always better to have too much than not enough!

Power Suply: Input: 100-240V ~ 50-60Hz / Output: 9V, 1.3APolarity: Center NegativeCompatible with DigiTech Whammy Pedal I, Whammy Pedal II, Whammy 4, Whammy 5, VHM5, MV5, GNX 1, VX 400, Vocalist Workstation, Vocalist Access, Vocalist VR, Vocalist Live 2, Vocalist Live 4, RP 3, S100, S400, RP 100 / 150 / 200 / 250 / 300 / 350, 500, RPx 400, Vocal 300, BP 200, Genesis 1, Jam Man Looper, Jam Man SoloXT Looper, Jam, Man Express XT Looper, Jam Man Stereo Looper, iStomp – 2,1 x 5,5 mm Barrel connector, negative center.
Polarity: Center Minus
Plug Type: Barrel
Voltage: 9V
Made in: China
Current (mA): 1300.0
Type: Power Supply

The power supply 1 SPOT you can use anywhere in the world without a voltage converter because it automatically converts voltage worldwide. No need to worry about AC hum interfering with your sound either. the 1 SPOT is one of the quietest power sources. It is the 9V DC adapter that only takes up one spot on your power strip. With the ability to handle up to 1700mA, the 1 SPOT can power your entire pedalboard.
Power Supply: Adapter;9V
Type: Adapter
Current: 1700 mA
ChargerType: Power Supply
Connector Angle: Straight
Colour: Black
Plug Type: Barrel
Polarity: Center Minus
Current (mA): 1700.0
Variant: 1 SPOT
Made in: China
Voltage: 9V…

A chromatic pedal tuner. It offers 7 different tuning modes including normal, flat, double flat and chromatic mode. The tuning progress is displayed via a single-digit LED display and an 11-point stream meter. Two additional directional LEDs indicate the required tuning direction. In addition, the tuner is equipped with one ¼'' input, one ¼'' output and a Bypass output. Powered by a 9V battery or a 9V adapter (not included).
Made in: China
UK/EU Power supply included: No

Custom moulded in the UK to fit the contours of the Headrush Mx5. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Headrush Mx5.
Made in: United Kingdom
Type: Dust Cover
Compatible with: Headrush Mx5

Custom moulded in the UK to fit the contours of the Boss 200 Series. Super durable polycarbonate shell offers a high level of protection and slides straight into equipment bags, making it ideal for the travelling. Shields faders and controls from dust, liquid and accidental impact whilst accommodating cables. At home, on the road or in the club, Decksaver has your Boss 200 Series.
Type: Dust Cover
Compatible with: Boss 200 Series
Made in: United Kingdom

Approved 12V DC/1000mA power supply with negative centre that is compatible with TC Electronic stompbox pedals.
Voltage: 12V
Made in: China
Power Supply: 240V
Polarity: Center Minus
Current: 701-1000 mA
Number of Outputs: 1
Plug Type: Barrel
Current (mA): 1000.0
ChargerType: Power Supply
UK/EU Power supply included: No

Stylish, lightweight, and durable, the CB-GT1 bag is the perfect solution for transporting the GT-1 Guitar Effects Processor and essential accessories. The rugged exterior and thick internal padding shield your gear from bumps and bruises, while a convenient shoulder strap and reinforced handle make carrying easy.
Type: Pedal Bag
Made in: Vietnam
Original Colour by Producer: Black;Black
Waterproof: Yes
Colour: Black
Strap: Yes;Shoulder Strap
Padding: Yes
Handle: Yes

Compact and portable 3-button footswitch pedal for use with several DigiTech products, including The Jimi Hendrix Experience, The JamMan, or Expression Factory. Pedal provides increased functionality and convenient Hands-free control over up/down selection of Models, Mode changes, Loop selection, automatic Start/Stops, and auto record where applicable. It is equipped with durable metal chassis construction, one 1/4" input and 3 m stereo TRS cable.
Number of Buttons: 3
Power Supply: Passive
Colour: Black
Battery Operation: No
Type: Footswitch

Mix and match up to 4 TC-Helicon vocal effect pedals together conveniently, simply and with less cable clutter than ever before with this essential audio and power accessory kit-ideal for VoiceTone Singles. With the included 12-volt power supply and DC interconnect cables, there are many different options for connecting your TC-Helicon effects. The power supply in the Singles Connect kit is more than powerful enough to power one of our large multi-FX units and a VoiceTone Single pedal at the same time.
~ Length: 0 m
Made in: China
Colour: Black

The Behringer FCV100 V2 Volume and Modulation Pedal is a powerful two-in-one pedal that controls all the dynamics of your playing. Use your foot to alter the volume giving you hands-free control over your level. It also functions as an expression pedal when connected to devices with correct input. With adjustable minimum volume the level of expressiveness is totally up to you; regardless of how you use it though the VCA control ensures reliability and remarkably smooth performance. Expressiveness made easy tailor your dynamics with ease while keeping your hands free.

Digital multi-effects pedal comparable to state-of-the-art studio processors that features 24-bit/40 kHz high-resolution stereo effects including Chorus, Flanger, Phaser, Delay, Tremolo and Pitch Shifter. It also provides dedicated Level control plus 2 additional parameter controls for adjustment of delay time, flanger rate etc., a status LED indicator for effect on/off and battery check, and a first-class electronic on/off switch that maintains incredible signal integrity in bypass mode. Pedal can be powered by either a 9 V battery or DC power supply (not included). Dimensions: 54 x 70 x 122 mm. Weight: ca 330 g.
Power Supply: 9V DC ( - )
UK/EU Power supply included: No
Battery Operation: Yes<&hellip;

Sustain pedal for Casio keyboards, plastic
Cable Length: 1,7 m
Original Colour by Producer: Black;Black
Colour: Black
Type-A Connector: Jack MONO 6,3 mm Male
Type: Sustain Pedal
Polarity Switch: No
Made in: China
Compatible with: Universal