Car Jacks

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.

Expert Quality, ideal for the workshop or factory use. The chain hoist has a triple spur geared shaft and pinion with load braking and double pawls. The compact gear housing allows use in areas of limited clearance. High quality welded chain with safety latches on the load hooks.

• Fitted with heat treated and ground, triple-spur geared shaft and pinion.• Also includes mechanical load brake for extra safety.• All chains are manufactured from hardened alloy material and load hooks feature safety latches.• Compact gear housing allows use where headroom is limited.Fitted with heat treated and ground, triple-spur geared shaft and pinion. Also includes mechanical load brake for extra safety. All chains are manufactured from hardened alloy material and load hooks feature safety latches. Compact gear housing allows use where headroom is limited.• Fitted with heat treated and ground, triple-spur geared shaft and pinion. • Includes mechanical load brake for extra safety. • Al…

For repairs and maintenance. Suitable for most standard cars. Ramp height 200mm; tyre/wheel width 180mm. Extensions are available to lower the angle for low ground clearance vehicles Stock No 23306. Sold loose.

For repairs and maintenance. Suitable for most standard cars. Platform height 200mm; platform width 205mm approx. Extensions are available to lower the angle for low ground clearance vehicles Stock No 23306. Sold loose.

• Manufactured from 3.5mm steel section.• Suitable for professional or serious DIY applications.• Corrosion resistant finish.• Ramps stack together and will stand upright for easy storage.• BS Approved.Manufactured from 3.5mm steel section. Suitable for professional or serious DIY applications. Corrosion resistant finish. Ramps stack together and will stand upright for easy storage. BS Approved.• 2tonne Capacity per pair. • Manufactured from 3.5mm steel section. • Ramps coated with corrosion resistant finish. • Ramps stack together and will stand upright for easy storage. • Maximum Tyre Width: 200mm. • BS Approved. • Model No. CAR2000Technical Specification:Capacity Pair: 2000kgMaximum Tyre Width…

• Steel construction car ramp extensions to decrease ascent angle.• Ideal for cars with low ground clearance.• Attaches to standard car ramps with a minimum width of 195mm.• Suitable for use with Model No. CAR2000.Steel construction car ramp extensions to decrease ascent angle. Ideal for sports cars and vehicles with low ground clearance. Attaches to standard car ramps with a minimum width of 195mm. Suitable for use with Model No. CAR2000.• Steel construction car ramp extensions to decrease ascent angle. • Ideal for cars with low ground clearance. • Attaches to standard car ramps with a minimum width of 195mm. • Suitable for use with Model No. CAR2000. • Length: 630mm. • Capacity: 400kg Each…

Compact, convenient and innovative 3tonne (pair) rated car ramps (maximum single axle weight of 1800kg) supplied with four stands and removable lifting beam, capable of raising a vehicle completely off the ground giving a clear workspace between vehicle and floor. Designed so the track width can be adjusted to fit various makes and model of cars with maximum tyre width of 380mm. Excellent for general servicing, exhaust work repairing damaged jacking points, sills, floor panels and undersealing. Will fit within confined areas such as garages and workshops. Safe and efficient operation, gives a clear workspace between the raised vehicle and floor. Requires a jack with a maximum saddle height of …

The Carasafe Ratchet Caravan Jack is good quality and sturdy. It has an integrated ratchet operation for easier lifting and lowering, supplied with the wrench handle. Maximum lifting capacity of 1000kg.A caravan jack with integrated ratchet operationWrench handle includedMaximum lift: 1000kgWeight: 2.2kgDimensions: 380 x 95 x 80mmMin / Max height: 100mm / 350mm

• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle.• The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp.• Low profile afforded by integral pivot/lifting point.Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. The clamp may also be used for lifting and transfer of steel beams and as a pulling clamp. Low profile afforded by integral pivot/lifting point.• Suitable for semi-permanent attachment to steel beams and acts as a lifting point for chain blocks, hoists and lifting tackle. • The clamp may also be us…

Ratchet action for quick height adjustment. Rated and sold in pairs.

• A fully adjustable saddle with forward, backward and side-to-side tilt.• Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the combination. e.g. 600GA and ADT3 - Maximum capacity is 500kg.Fully adjustable saddle with forward, backward and side-to-side tilt. Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ.• A fully adjustable saddle with forward, backward and side-to-side tilt. • Suitable for Model No's. 300TR, 300TRQ, 600TR, 600TRQ. • Note: When using these adjustable supports the maximum capacity of the jack and support combination will be limited to the lowest specified capacity in the com…

Specifications:- Weight: 2,578kg- Ability: 1500kg- Application: Automotive- Plastic weight: 6g

Load-bearing Capacity [t]: 5; Width Base Plate [mm]: 110; Colour: silver; Operating Mode: Hydraulic; Material: Steel; Lifting Height from [mm]: 197; Lifting Height, up to [mm]: 382; Jack type: Bottle jacks; Weight [kg]: 4.2; Number of Parts [parts]: 4; Packaging: in plastic holder

Load-bearing Capacity [t]: 1; Size: 35x50 mm; Lifting Height from [mm]: 80; Lifting Height, up to [mm]: 340; Weight [kg]: 1.7; Spanner Size: 17mm; Max. ambient temperature to [°C]: -50; Material: Aluminium; Product line: ULTRALIFT PRO; Supplementary Article / Supplementary Info Info 2: with storage bag, with handle

Lifting Height from [mm]: 100; Lifting Height, up to [mm]: 390; Weight [kg]: 0.24; Load capacity to [kg]: 1375; Material: Steel; Colour: black; for OE number: 7E0 011 031 J BN3; Model Year from: 2010; Supplementary Article / Supplementary Info Info 2: with storage bag, with handle

Lifting Height from [mm]: 100; Lifting Height, up to [mm]: 385; Weight [kg]: 0.24; Load capacity to [kg]: 1100; Material: Steel; Colour: black; for OE number: 2K5011031 C BN3; Model Year from: 2011; Supplementary Article / Supplementary Info Info 2: with storage bag, with handle

Colour: black; Material: Steel; Surface: Powder coated; Lifting Height from [mm]: 104; Lifting Height, up to [mm]: 385; Maximum Load [kg]: 1010; Weight [kg]: 1.84; Version: OEM Lift Pro; Size: 350x110x80 mm; for OE number: 1K0 011 031 AC BN3; Load-bearing Capacity [t]: 1; Operating Mode: Mechanical; Jack type: Bottle jacks; Vehicle type: Passenger cars

Load-bearing Capacity [t]: 2.25; Weight [kg]: 23; Lifting Height from [mm]: 150; Lifting Height, up to [mm]: 530; Size: 75*19*27,5; Operating Mode: Hydraulic; Jack type: Trolley jack; Vehicle type: Passenger cars, SUVs